TRENDnet TEG-424WS User manual

TEG-424WS
H/W: V1
Quick Installation Guide

Table of Contents
English .....................................................................................................
Troubleshooting ........................................................................................
1
1
3
2
6
1. Before You Start
2. Hardware Installation ........................................................................
3. Web Smart Switch Management Utility ..............................................
................................................................................
Table of Contents
Version 09.03.2008

Minimum Requirements
Optional Equipment
Application
?TEG-424WS
?Quick Installation Guide
?Utility and User Guide CD-ROM
?Power Cord
?Rack Mount Kit
?Rubber Cushions
?Web Browser: Internet Explorer (5.0 or above)
?Computer with network adapter installed
?RJ-45 network cable
?EIA Standard 19” Rack
?Mini-GBIC Modules (e.g. TEG-MGBSX, TEG-MGBS10, TEG-MGBS40,
TEG-MGBS80, TEG-MGBS10D3_5, TEG-MGBS40D3_5)
Package Contents
1. Before You Start
English
1
Servers with Copper Gigabit
PCI Adapters
(TEG-PCITXR)
Module SX multi mode GBIC
(TEG-MGBSX)
Module SX multi mode GBIC
(TEG-MGBSX)
24-Port Gigabit Web Smart Switch
with Mini-GBIC Slots
(TEG-240WS)
Laptops with 10/100Mbps PC Card
(TE100-PCBUSR)
28-Port Gigabit Web Smart Switch
(TEG-424WS)
1000Mbps 100Mbps

2. Hardware Installation
English
2
2. Connect a CAT-5e / 6 RJ-45
network cable from the computer
to an available Ethernet port of the
TEG-424WS.
Note:
1. After hardware installation is complete, use the Web Smart Switch
Management Utility to configure the TEG-424WS. To access the Web Smart
Switch Management Utility, open your web browser, and enter the default IP
Address http://192.168.0.1 and default password "admin". Make sure your
computer and the TEG-424WS are configured to the same network
segment.
2. The Mini-GBIC slots are shared with Gigabit Ethernet ports 25 and 26.
When the Mini-GBIC slots are in use, Gigabit Ethernet ports 25 and 26 are
disabled.
1. Connect the Power Cord to the
rear of the TEG-424WS and then
to a power outlet.

English
3
Note: If you would like to easily discover all the Web Management Switches on
the network, assign IP Address, change the password, and upgrade to the
latest firmware, then install the Web Smart Switch Management Utility. Follow
3. Click Start > All Programs >
TRENDnet > Web Smart Switch
Management Utility, and then
click Web Smart Switch
Management Utility.
3. Web Smart Switch Management Utility
For Windows User
1. Insert the Utility CD-ROM into
your computer's CD-ROM Drive
and then click Install Utility.
2. Follow the Installation Wizard
instructions. Click OK.

English
4
4. Click Discovery, and then double-
click the Switch that appears in
the Discovery List.
5. Click the Switch in the Monitor
List and then click Configure
settings.
6. Configure the IP Address, Subnet
mask, Gateway, and Password.
Click Set.
7. Click OK.

English
5
9. Enter the Password and then
click Login.
Password is admin.
Note: The default password is case
sensitive.
For more information regarding the Web Smart Switch Management Utility
configuration and advanced settings, please refer to the User's Guide included
on the Utility CD-ROM or TRENDnet's website at www.trendnet.com
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.TRENDnet.com/register
Thank you for choosing TRENDnet
8. Click Access Web.
Your installation is now complete.

Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Q5:
A5:
After connecting the TEG-424WS to a power outlet, the LEDs do not turn on.
Check the connection of the power cord to the TEG-424WS and the power outlet. Also
check that the power outlet is receiving power.
After installing the Web Smart Switch Management Utility, I clicked Discovery and the
Utility is unable to discover the TEG-424WS. What should I do?
First, make sure that the TEG-424WS is powered on and that all connections are secure.
Second, check that your computer's IP address is on the same network segment as the
TEG-424WS. The default IP address of the TEG-424WS is http://192.168.0.1 and the default
password is admin. Third, disable any software firewall programs such as ZoneAlarm or
Norton Internet Security. If you are using Windows XP, Server 2003 or Vista, disable the
built-in firewall.
When I access the TEG-424WS using a web browser, I get a screen that tells me “only
one user can login”. What should I do?
Another computer is configuring the TEG-424WS. Please wait until the user logs off. If
the other user has already logged off and you still get the same screen, then disconnect the
power cord from the TEG-424WS, wait for 5 seconds, reconnect the power cord to the TEG-
424WS, allow 5 seconds for the switch to power on, and then attempt to access the web
configuration page again.
I forgot the administration password. How do I reset my TEG-424WS?
Press on the reset button using a pen or paperclip for 10 seconds. The default
password is admin. Note: The default password is case sensitive.
When I connect a computer to the Switch's Gigabit Ethernet port, I am not getting
Gigabit speeds. What should I do?
First, check the LEDs on the Switch. When the 1000Mbps LED is off, the computer's
connection speed is 10 or 100Mbps. Second, make sure that you have a Gigabit Ethernet
adapter installed. Third, make sure to use a Cat 5e or Cat 6 Ethernet cable. Some CAT-5
cables are not rated to run in Gigabit.
If you still encounter problems or have any questions regarding the TEG-424WS, please refer to
the User's Guide included on the Utility CD-ROM or contact Trendnet's Technical Support
Department.
6
Troubleshooting

Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de alimentacón
necesario para su funcionamiento. El uso de un adaptador distinto al mencionado puede producir
daños fisicos y/o daños al equipo conectado. El adaptador de alimentación debe operar con voltaje y
frecuencia de la energia electrica domiciliaria existente en el pais o zona de instalación.

Copyright ©2008. All Rights Reserved. TRENDnet.
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com/register
20675 Manhattan Place
Torrance, CA 90501
USA