TRENDnet TE100-S16 - DATA SHEETS User manual

TRENDnet’s TE100-S16 is a high performance auto-sensing
NWay switch that automatically negotiates between 10Base-
T and 100Base-TX network speeds. All ports support half- and
full-duplex that allows maximum network performance. It is
designed to eliminate unnecessary traffic and relieve
congestion on critical network paths. Designed and built to
increase network bandwidth, TRENDnet’s TE100-S16 is the
best solution for both corporate and small business network
environments.
TE100-S16
16-port 10/100Mbps NWay Switch (Rack Mount)
BENEFITSFEATURES
Easy Installation:
Flexibility:
Cost Effectiveness:
Performance:
Designed to link 10Mbps and
100Mbps networks.
All ports automatically negotiate
10/100Mbps network speed. All ports
are Auto-MDIX; connection can be
made with either a straight through or
a crossover cable.
Provide 10/100Mbps of Fast Ethernet
at an affordable rate.
Top performance at an affordable
price.
Compliant with IEEE 802.3 10Base-T, IEEE 802.3µ 100Base-TX
Support 16 UTP/STP RJ-45 10/100Mbps NWay auto-sensing
ports
Auto-MDIX on each port
Supports store and forward switching architecture with non-
blocking full wire-speed performance
Half- and full-duplex operation for each port
Supports aging function and 802.3x flow control for full-duplex
mode and back pressure flow control for half-duplex mode
operation
Auto-learning of network configuration
Built-in 8K entries per device for Filtering Address Table
512KB per device RAM buffer. Plug and Play
EIA-19 Rack Mountable
5-Year warranty
TE100-S16 (03-07-2005)
TRENDnet
TRENDware, USA
What's Next in Networking

RELATED PRODUCT
To Order Please Call:
1-888-326-6061
TE100-S16:
16-port 10/100Mbps NWay Switch (Rack Mount)
TE100-S24:
24-port 10/100Mbps NWay Switch (Rack Mount)
TE100-S16V:
16-port 10/100Mbps Smart Switch with Fiber Slot (Rack
Mount)
TE100-S24V:
24-port 10/100Mbps Smart Switch with Fiber Slot (Rack
Mount)
TE100-SFXM:
SC-type fiber slide-in module for TE100-S16V/S24V
NETWORKING SOLUTIONS
SPECIFICATIONS
Standards:
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,
ANSI/IEEE 802.3 NWay auto-negotiation
Connectors:
16 10/100Mbps shielded RJ45 Auto-MDIX ports
Network Cables:
Ethernet: Cat. 3,4,5, UTP/STP, EIA.ITA-568 100 Ohm
Fast Ethernet: Cat. 5, UTP/STP, EIA/TIA-568 100 Ohm
Cable Length:
100 meters maximum
Protocols:
CSMA/CD
Data Transfer Rate:
Ethernet: 10Mbps (Half-Duplex), 20Mbps (Full-Duplex)
Fast Ethernet: 100Mbps (Half-Duplex), 200Mbps (Full-Duplex)
Data RAM Buffers:
512KB per device
•
•
•
•
•
•
•
•
•
Filtering Address Table:
• 8K entries per device
Internal Power Adapter:
• 100 ~ 240 VAC, 6 watts max.
Diagnostic LEDs:
• Power, Link/Activity, 100Mbps
Weight:
• approximately 2.0 Kg (4.4 lb.)
Dimensions:
• 440 x 140 x 44 mm (17.3 x 5.51 x 1.73 inches) (W x H x D)
Temperature:
• Operating: 0° ~ 40°C (32° ~ 104°F)
• Storage: -10° ~ 70°C (14° ~ 158°F)
Humidity:
• Operating:10% ~ 90% RH
• Storage: 5% ~ 90% RH
Certifications:
• FCC Class A, CE Mark A, VCCI-A
TE100-S16
16-port 10/100Mbps NWay Switch (Rack Mount)
TE100-S16
16-port 10/100Mbps NWay Switch (Rack Mount)
TRENDnet is a registered trademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this
document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit ____________________
http://www.TRENDNET.com.
©
Copyright TRENDware International, Inc. 2005. All Rights Reserved.
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: [phone]
Fax: [phone]
Web:
Email: [email protected]
www.TRENDNET.com
ORDERING INFORMATION
TRENDnet
TRENDware, USA
R