TRENDnet's TC-NT1 is a practical and easy-to-use cable
tester that can easily read the correct pin configuration of
10Base-T cable, 10Base-2 cable, RJ-45/RJ-11 modular
cables, 356A, TIA-568A/568B, and Token Ring cable by
comparing one transmitting end to the corresponding
receiving end. The remote kit can test installed cables over
great distances, either on wall plates or patch panels. Our TC-
NT1 is economically priced for correct cable testing.
TC-NT1
Professional Network Tester
Test the correct pin configuration of 10Base-T
(Category 5), 10Base-2 Ethernet cable (coax), RJ-
45/RJ-11 modular cables, 356A, TIA-568A/568B, and
Token Ring cable
Test the grounding
Verify cable continuity, openness, shortness, and
miswire easily
Test the cable 1,000 feet away that are on wall plate
or patch cable with remote kit
Auto or Manual scan modes for pin-out indicators
Power Switch is included for saving battery power
1 Year Warranty
FEATURES PRODUCT INFORMATION
TC-NT1: Network Cable Tester for
UTP, STP, Coaxial, and Modular
Cables
TC-NT2: Network Cable Tester with
Tone Generator for UTP, STP, Coaxial,
and Modular Cables
TC-CT68: RJ-11/RJ-45 Crimp/Cut/Strip
Tool
TC-PDT: Punch Down Tool with 110
and Krone Blade
TC-1KC5G: 1,000 feet Solid CAT5e
UTP Cable
To Order Please Call:
1-888-326-6061
ORDERING INFORMATIONORDERING INFORMATION
TC-NT1 (11-17-2002)
TRENDnet
TRENDware, USA
What's Next in Networking
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: 310-891-1100
Fax: 310-891-1111
Web:
www.TRENDNET.com
TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this
document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit
____________________
http://www.TRENDNET.com.
©
Copyright TRENDware International, Inc. 2004. All Rights Reserved.
