TRENDnet TPL-111BR - WIRELESS POWERLINE ROUTER 125 User manual

TPL-111BR
Version 10.30.06
Powerline 802.11g Wireless Router Quick Installation Guide
Guide d'installation rapide du
Routeur Powerline sans fil 11g 54 Mbps
Anleitung zur Schnellinstallation des
Drahtloser 54 MBit/s 11g Powerline-Router
Guía de Instalación Rápida
Enrutador Powerline inalámbrico 11g a 54Mbps
Copyright ©200 . TRENDware International, Inc.6 All Rights Reserved.

Table of Contents
English ................................................................................................................... 1
1
3
4
10
12
8
11
14
16
1. Prepare for Installation ...................................................................................
2. Install Hardware .............................................................................................
3 Configure your Powerline AP/Router .............................................................
4. Wireless Configuration ...................................................................................
5. Powerline Configuration .................................................................................
6. Configure LAN Settings .................................................................................
7. Accessing the Powerline Router ....................................................................
8. Test your Connection .....................................................................................
Troubleshooting ......................................................................................................

Thank you for purchasing the TPL-111BRP. This Powerline AP/Router will allow
you to securely share your Internet connection, files, and other resources with
multiple users.
This guide will help you set up and configure your Powerline AP/Router.
Following the installation instructions should be quick and easy. If you run into
problems, please refer to the Troubleshooting section or the more detailed
installation procedures on the User's Guide CD-ROM. If you need further
technical support, please visit www.TRENDNET.com or call technical support
by phone.
Verify Equipment
Before installing the AP/Router, you should have:
1. An installed Cable/DSL Modem with an Ethernet Port
2. A Broadband Internet Account
3. A web browser such as Internet Explorer (5.0 or higher) or Netscape
Navigator (4.7 or higher)
4. A network cable for each computer
5. A computer with the TCP/IP Protocol and Client for Microsoft Networks
Service installed
6. A Powerline adapter that connects a remote computer to your powerline
network.
Verify Package Contents
Please make sure you have everything in the box:
User’s Guide CD-ROM
1
Quick Installation Guide CAT. 5 Cable (1.5m/5 ft.)
TPL-111BRP
1. Prepare for Installation
English QIG
English
Copyright ©200 . TRENDware International, Inc.5 All Rights Reserved.
TRENDnet
TRENDware,USA
What's Next in Networking
TPL-111BR
Version07.11.05
Powerline 802.11g Wireless Router Quick Installation Guide
Guide d'installation rapide du
Routeur Powerline sans fil 11g 54 Mbps
Anleitung zur Schnellinstallation des
Drahtloser 54 MBit/s 11g Powerline-Router
Guía de Instalación Rápida
Enrutador Powerline inalámbrico 11g a 54Mbps

2
Collect Account Information from Internet
Service Provider (ISP)
During the installation of your AP/Router, the configuration utility will ask you to
specify your ISP connection type. Therefore, please verify your Cable or DSL
Internet broadband connection with your ISP and ensure you have all the
information for one of the following connection types:
Dynamic IP Cable Connection
Nothing is required. The IP address will be automatically be assigned by your
ISP.
Static or Fixed IP Cable Connection
Internet IP Address:____.____.____.____ (eg. 215.24.24.129)
Subnet Mask: ____. ____. ____. _____
Gateway IP Address:____.____.____._____
Primary DNS:____.____._____.______
Secondary DNS:_____._____._____.____
PPPoE Connection
Login Name:______________
Password:________________
PPTP DSL Connection
Internet IP Address:____.____.____.____ (eg. 215.24.24.129)
Subnet Mask: ____.____.____._____
Gateway IP Address:____.____.____._____
PPTP Server IP:____.____._____._____
Login Name:_______________
Password:_________________
English

3
2. Install Hardware
1. Connect one RJ-45 network cable from the Cable/DSL Modem's Ethernet
port to the WAN port on the Powerline Router.
2. Connect a different RJ-45 network cable from your Powerline Adapter to your
computer's network card.
3. Plug the Powerline Adapter into your power outlet. DO NOT plug the
Powerline Adapter into a surge protector strip.
4. Plug the Powerline Router into your power outlet. DO NOT plug the
Powerline Router into a surge protector strip.
5. Turn on your Cable/DSL modem.
6. Turn on your computer
42
3
1
Verify Hardware Installation
Verify that the following front panel lights are lit: Power, WAN, 11G, and one
LAN port LED for each wired computer connected to the AP/Router.
English
LAN
11G
POWER WAN

4English
3. Configure your Powerline AP/Router
The following section will help you configure your AP/Router to connect to the
Internet and your PCs. The setup differs and is dependent on the type of
Internet connection you have. If you are not sure what type of connection you
have, please contact your ISP to obtain the required information, which is listed
in the Prepare for Installation section at the beginning of this Quick
Installation Guide.
1. Open your web browser, type http://10.0.0.2 in the Address bar, and
press Enter.
2. An authentication window will appear. Enter the username and password,
and then click OK. By default, the username is "admin", and the password is
“admin.”
NOTE: To reset the password on the AP/Router, refer to the User's
Guide CD-ROM.

5English
3. Click WAN. This page will allow you to configure the TPL-111BRP for
Internet access. If your ISP requires you to enter a Host Name and Domain
Name, please type this information in the appropriate fields. Select your
Connection Type from the pull down menu, (DHCP, Static IP, PPPoE, or
PPTP) and proceed to the appropriate subset of instructions below.
DHCP
4. Select DHCP as the Connection Type.
5. Go to step 15.

6English
Static
6. Select Static as the Connection Type.
7. Enter the IP address, subnet mask, default gateway, and domain name
server (DNS) provided by your ISP.
8. Go to step 15.
PPPoE
9. Select PPPoE as the Connection Type, and scroll down to the PPPoE
section.
10. Enter your username and password.
11. Go to step 15.
NOTE: Select Enabled from the PPPoE Keep Alive pull-down menu;
this is the recommended setting for most users.

7English
PPTP
12. Select PPTP as the Connection Type, and scroll down to the PPTP section.
13. Enter the PPTP Gateway Address, username, and password provided by
your ISP.
14. Go to step 15.
15. Scroll down and click Apply.
16. Click Continue.
NOTE: Select Enabled from the PPTP Keep Alive pull-down menu; this
is the recommended setting for most users.

8English
4. Wireless Configuration
1. Click Wireless. The recommended settings will be automatically selected for
you. You may, however, choose to select a different channel and/or network
name (SSID).
2. Choose your country from the pull-down menu.
NOTE: You must remember your “network name (SSID),” as you will
need it when you configure your wireless network adapter to connect to
your access point. If you wish to enable WEP for encryption-based
security, refer to the included User's Guide CD-ROM for instructions.