TRIBU DIA 70 User manual

BRANCH TABLE DIA 70, DIA 80, 80X80, 90X90
ASSEMBLY INSTRUCTIONS
BRDT01 - 01-07-2019
07661
07660
07671
07670

CONTENT
Every branch dining table with a round table top has the following components
1 x
Tabletop
3x
Leg
1 x
Y-Cross
8 x
Bolt A Long
8 x
Bolt A Short
8 x
T-Nut + Headless screw

CONTENT
Every branch dining table with a square table top has the following components
1 x
Tabletop
4x
Leg
1 x
X-Cross
8 x
Bolt A Long
8 x
Bolt A Short
8 x
T-Nut + Headless screw

If you want to assemble a branch table with a round table top proceed to step:
If you want to assemble a branch table with a square table top proceed to step:
1
2
8
ASSEMBLY INSTRUCTIONS
Take the first leg and put 1 T-nut in the designated slot.
2
Slide the Y-cross over the leg + T-nut.
3

Fix the Y-cross to the leg by pushing the leg into the Y-cross and
simultaneously tightening the headless bolt 80%.
4
Repeat step 2-4 for each leg.
5
Place the table top upside down on a protective cover. Lower the
assembled legs onto the table top. To fix the legs to the table top use 2x
bolt A. Use the correct bolts and don’t use a powertool!
6
TABLETOP BOLT A
ALUMINIUM LONG
(2 cm)
TEAK LONG
(2 cm)
GRANITE SHORT
(1,2 cm)

Fix the Y-cross to the legs by pushing the leg into the Y-cross and
simultaneously tightening the headless bolt 100%.
7

Take the first leg and put 1 T-nut in the designated slot.
8
Slide the X-cross over the leg + T-nut.
9

Fix the X-cross to the leg by pushing the leg into the X-cross and
simultaneously tightening the headless bolt 80%.
10
Repeat step 7-9 for each leg.
11
Place the table top upside down on a protective cover. Lower the
assembled legs onto the tabe ltop. To fix the legs to the table top use 2x
bolt A. Use the correct bolts!
12
TABLETOP BOLT A
ALUMINIUM LONG
(2 cm)
TEAK LONG
(2 cm)
GRANITE SHORT
(1,2 cm)

Fix the Y-cross to the legs by pushing the leg into the Y-cross and
simultaneously tightening the headless bolt 100%.
7

Tribù nv
Oude Heidestraat 72
3740 Bilzen
BELGIUM
www.tribu.com
[email protected]