Tripp Lite APSX1250F User manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +[phone]
E-mail: [email protected]
Model #: APSX1250F
PowerVerter APS X Series Inverter/Charger - with Faster Auto-Transfer Switching
Highlights
12V DC or 230V AC input; 230V, 50 Hz output; 2 AC outlets
1250W continuous, 1875W OverPower and 2500W DoubleBoost inverter
output (see specifications)
3-stage selectable 7.5 / 30 amp wet/dry cell battery charger
Faster Auto Transfer Switching option for battery backup/UPS operation
Reliability-enhanced large-transformer design with protected DC terminals
Description
Tripp Lite's APSX1250F DC-to-AC inverter with faster automatic line-to-battery transfer and integrated charging system serves as an extended-run
UPS, a stand-alone power source or an automotive inverter. Supplies up to 1250W of continuous 230V AC power to 2 AC outlets from any 12V
battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for up to 1-60 minutes
and DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold
start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected
equipment and the battery set is recharged via a 3-stage selectable 7.5/30A charging system. In UPS mode, the APS system responds to blackouts
and voltage fluctuations with near-instantaneous automatic transfer to battery-derived AC output. Includes a set of high-current DC input terminals
for simple installation (user supplies batteries and cabling—see owner's manual for recommendations). Passes sine wave utility or generator power
during battery charging and UPS line power operation, and efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large
transformer design with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current
needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous
status information (APSRM4 sold separately). Provides unlimited runtime with connection of any number of user-supplied batteries. Highly adaptable
to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line-to-battery power transfer
voltages.
Applications
Versatile inverter/charger system with auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking, conversion
vans, marine environments and fleet service vehicles; a standalone alternative power source for off-grid alternative energy or export
applications, and as an uninterruptible power supply (UPS) for items compatible with a 10-millisecond transfer time.
Package Includes
APSX1250F Inverter/Charger
Instruction manual with warranty information
(1) Universal Receptacle Adapter compatible with multiple international plug sets
Features
Comparable to the APSX1250 with faster auto-transfer switching
Supports 230V AC output from a 230V AC line power source or 12V DC battery source

10 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for
equipment compatible with a 1/2 cycle transfer time
Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds (see specification
chart)
OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions
3 stage, selectable 7.5/30 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
Dual C13 output receptacles pass 120V line power or inverter output through to connected equipment
3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to
maintain a full battery charge
Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
Set of 4 configuration dipswitches support wet/gel battery charging profiles, charger enable/inhibit, and selectable 144/163/182/201V AC
low voltage auto transfer during brownouts
Set of 4 additional configuration dipswitches support 4 levels of charger limiting relative to output load size
Resettable 5A charger AC input breaker and resettable 6A AC output breaker and automatic 2 speed cooling fan protect the inverter from
load and temperature related failures
Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory)
Specifications
OVERVIEW
Intended
Application
Emergency Home Power
OUTPUT
Frequency
compatibility
50 Hz
Output watts INVERTER MODE 1250 watts continuous, Double Boost rated to 2500 watts peak (up to 10 seconds). Overpower
rating supports longer term overloads to 1875 watts for up to 15 seconds prior to inverter shutoff.
Continuous output
capacity (watts)
1250
Peak output
capacity (watts)
2500
Output nominal
voltage
230V
Output voltage
regulation
LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC):
Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
Output frequency
regulation
50 Hz (+/- 0.3 Hz)
Overload
protection
Includes 5A input breaker dedicated to the charging system and 6A output breaker for AC output loads
Outlet quantity /
type
2 AC outlets
INPUT
Recommended
Electrical Service
DC INPUT: Requires 12VDC input source capable of delivering 125A for the required duration (when used at full
continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive
applications, professional hardwire installation with 225A minimum battery system fusing is recommended. AC INPUT:
230VAC
Maximum input
amps / watts
DC INPUT: Full continuous load of 125A at 12VDC. AC INPUT: 9.3A at 230VAC with full inverter and charger load (3.3A
max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0%
based on AC output loading using the charger limiting set points - see manual for setting instructions)
Input connection
type
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection

Voltage
compatibility (VAC)
230
Voltage
compatibility (VDC)
12
BATTERY
Expandable
battery runtime
Runtime is expandable with any number of user-supplied wet or gel type batteries
DC system voltage
(VDC)
12
Battery Pack
Accessory
(optional)
98-121 sealed lead acid battery (optional)
Battery recharge
rate
Selectable 7.5 / 30 amp
LEDS ALARMS & SWITCHES
Switches 3-position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off
control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode.
In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power - to
maintain continuous AC power to connected loads
Front panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences
SURGE / NOISE SUPPRESSION
AC suppression
joule rating
840
PHYSICAL
Shipping weight
(lbs)
26
Shipping weight
(kg)
11.8
Cooling method Multi-speed fan
Unit Dimensions
(HWD/in)
7 x 8.75 x 9
Unit Dimensions
(HWD/cm)
17.78 x 22.23 x 22.86
Shipping
Dimensions
(HWD/in)
12.5 x 11 x 10.75
Shipping
Dimensions
(HWD/cm)
31.75 x 27.94 x 27.31
Unit weight (lbs) 24
Unit weight (kg) 10.9
Material of
construction
Polycarbonate
Style Heavy-duty with built-in battery charger
Form factors
supported
Mounting slots enable permanent placement of APSX1250 on any horizontal surface (see manual for additional
mounting information)
ENVIRONMENTAL

Relative Humidity 0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer time from
line power to
battery mode
10 milliseconds (typically compatible with many computers, servers and networking equipment - verify transfer time
compatibility of loads for UPS applications)
Low voltage
transfer to battery
power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163,
182, 201V; see manual)
High voltage
transfer to battery
power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272
SPECIAL FEATURES
Appearance All-black color scheme
Remote control
capability
Yes
CERTIFICATIONS
Certifications RoHS compliant
WARRANTY
Product Warranty
Period (Worldwide)
Call if outside the U.S, Canada or Puerto Rico
Related Items
Optional Products
Product Type Related Model Description Qty.
External Battery Housings BP-260 Ideal battery housing for use with Tripp Lite PowerVerter APS
inverter/charger systems with a 12 or 24V DC system voltage.
1
Inverter Accessories APSRM4 Remote Control Module - for Tripp Lite Inverters and Inverter/Chargers 1
Replacement Batteries 98-121 12V DC Sealed, Maintenance-Free Battery 1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=3595.
Copyright © 2012 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.