Tripp Lite PowerVerter PV 1000HF User manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +[phone]
E-mail: [email protected]
Model #: PV1000HF
PowerVerter® 1000W Compact Inverter with 4 Outlets
Highlights
12V DC input; 120V AC output; 4 outlets
1000 watts continuous output
2000 watts peak output (instantaneous)
Powers an entire mobile office
Description
Utilize your vehicle's battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 1000 watts of
120V AC power to 4 AC outlets from any 12V battery. Includes a set of DC terminals for simple installation. Compact, lightweight metal case design
is among the smallest, most rugged inverters available at this power level.
Applications
Ideal for TVs, DVD players, power tools, small coffeemakers, game systems, desktop computers, laptops, portable electronics, lighting and
other AC applications under 1000 watts.
Package Includes
PV1000HF Inverter
Warranty information
Instruction manual
Features
Allows users to run AC appliances from any properly-sized 12V battery or automotive DC system
Converts 12V DC battery power to 120V AC power
1000 watts continuous output power; 2000 watts peak output power (instantaneous)
4 outlets
Compact, lightweight design with all-metal housing
Remote control jack provides optional remote monitoring and control when used with optional remote module (APSRM4, sold separately)
Low battery alarm with auto-shutoff prevents deep battery discharge
High-efficiency operation conserves batteries to prolong run time
Battery charge level LEDs indicate the approximate charge level (high/medium/low) of connected batteries
Connected load level LEDs indicate the approximate wattage load level (high/medium/low) of connected equipment
Operating mode switch controls inverter operation
Battery Charge Conservation Dial conserves battery power by setting the load-level at which the inverter automatically shuts off
Cooling fan regulates internal temperature and prolongs service life
Mounting flanges provide safe, fixed installation
Grounding lug connects to vehicle ground

Grounding lug connects to vehicle ground
Grooved cooling surface provides additional surface area for more efficient cooling
Specifications
OUTPUT
Frequency
compatibility
60 Hz
Output watts 1000
Continuous output
capacity (watts)
1000
Peak output capacity
(watts)
2000
Output nominal
voltage
120V
Output voltage
regulation
Maintains PWM sine wave output voltage of 115 VAC (+/- 10% VAC)
Output frequency
regulation
60 Hz (+/- 5% Hz)
Overload protection Automatic overload protection shuts down inverter system in the event of overloads. Inverter and electrical system
are further protected via four internal 40A automotive fuses
Outlet quantity / type 4 NEMA 5-15R
INPUT
Recommended
Electrical Service
Requires 12V DC input source capable of delivering 100A for the required duration (when used at full capacity). For
automotive applications, hardwire installation with 175A battery system fusing is recommended.
Maximum input amps
/ watts
Full continuous load - 100A at 12V DC, No load - 1.5A at 12V DC, Shutdown / load sense mode - 100 micro amps
Input connection type Set of 2 DC bolt-down wiring terminals
Input cord length
details
User supplies cabling. Minimum gauges for full load operation: #4 wire (12 ft max), #2 wire (20 ft max), #0 wire (31
ft max).
Voltage compatibility
(VDC)
12
BATTERY
DC system voltage
(VDC)
12
LEDS ALARMS & SWITCHES
Alarms Dual function alarm indicates overload conditions or low DC input voltage of 10.5V or less
Switches 3 position rocker switch enables on/off power control, plus "remote" setting which enables inverter to be remotely
powered on or off when used in conjunction with APSRM4 Remote Control Module (sold separately)
Front panel LEDs Set of 6 LEDs offer continuous status information on battery and connected load conditions
PHYSICAL
Shipping Dimensions
(HWD/in)
5.25 x 7.5 x 15
Shipping Dimensions
(HWD/cm)
13.34 x 19.05 x 38.1
Shipping weight (lbs) 6.8

Shipping weight (kg) 3.1
Unit Dimensions
(HWD/in)
4.25 x 6 x 13
Unit Dimensions
(HWD/cm)
10.8 x 15.24 x 33.02
Unit weight (lbs) 6
Unit weight (kg) 2.7
Cooling method Fan
Material of
construction
Aluminum / sheet metal
Style Compact
Form factors
supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional
mounting information)
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
SPECIAL FEATURES
Appearance Attractive, rugged, metallic gray color inverter system
Remote control
capability
Yes
WARRANTY
Product Warranty
Period (Worldwide)
1-year limited warranty
Related Items
Optional Products
Related Model Description Qty.
APSRM4 Remote Control Module - for Tripp Lite PowerVerter Inverters and Inverter/Chargers 1
98-121 12V DC Sealed, Maintenance-Free Battery for All Inverter/Chargers that Accept 12V DC
Battery Connections
1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=2905.
Copyright © 2013 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.