Tripp Lite PDUV30HV User manual

1
Basic, Metered and Metered with
Isobar®Surge Protection Vertical
Rack PDUs
Models:
PDUMV30, PDUMV30HV, PDUV30HV, PDUV30-36,
PDUMV30-ISO, PDUMV20HV, PDUMV20HVL6,
PDUMV20HV-36, PDUV20HVL6-72
(Series Numbers: AGIB6672, AGPD6673, AGPD6674)
Important Safety Instructions 2
Important Warnings 2
Installation 4
Features 4
Warranty & Product Registration 6
Español 7
Français 13
Русский 19
Deutsch 25
TrippLite.Eaton.com/support
Copyright © 2023 Tripp Lite. All rights reserved.
Owner’s Manual
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty

2
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be
followed during the installation, operation and storage of this
product. Failure to heed these instructions and warnings will
void the product warranty.
CAUTION Only those who are properly trained or qualified to use this device
should do so. Anyone who is not trained or qualified should not use this device
unless it is under the supervision of someone who is properly trained or qualified
to do so. Children must be supervised to ensure that they do not use the device
as a toy.
Do not install this device if there is not at least 10 meters (30 feet) or more of wire
between the electrical outlet and the electrical service panel.
Never use the device if the cord and plug are damaged; if it is not working
properly, or if it has been dropped or damaged, take it to an authorized service
center for inspection and repair.
If the power cord is damaged, it must be replaced by the manufacturer, its
authorized service agent, or by qualified personnel in order to avoid a danger.
• The PDUMV30-ISO PDU model provides surge and line noise protection to connected
equipment through its outlets.
• Non-ISO PDUs do not provide surge and line protection to connected equipment.
• The PDU is designed for indoor use only in a controlled environment away from excess
moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
• The PDU must be installed by a qualified technician only.
• Install in accordance with National Electrical Code standards. Be sure to use the proper
overcurrent protection for the installation, in accordance with the plug/equipment rating.
• Connect the PDU to an outlet that is in accordance with your local building codes and
adequately protected against excess currents, short circuits, and earth faults.
• Keep indoor ambient temperatures between 32°F and 77°F (0°C and 25°C).
• Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to
significantly affect its safety or effectiveness is not recommended. Do not use this
equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous
oxide.
• Do not connect the PDU to an ungrounded outlet or extension cords or adapters that
eliminate the connection to ground.
• The power requirement for each piece of equipment connected to the PDU must not
exceed the individual outlet’s load rating.
• The plug on the power supply cord serves as the disconnect device.
Important Safety Instructions
Important Warnings

3
Important Warnings
• The electrical outlets that supply power to the equipment should be near the equipment
and easily accessible.
• The total power requirement for equipment connected to the PDU must not exceed the
maximum load rating for the PDU.
• Do not drill into or attempt to open any part of the PDU housing. There are no user-
serviceable parts inside.
• Do not attempt to modify the PDU, including the input plugs and power cables.
• Do not attempt to use the PDU if any part of it becomes damaged.
• Do not attempt to mount the PDU to an insecure or unstable surface.
• Never attempt to install electrical equipment during a thunderstorm.
• Install in accordance with National Electrical Codes. Be sure to use the proper
overcurrent protection for the installation, in accordance with the plug rating/equipment
rating as follows:
Model Series Number Overcurrent Protection
PDUV30HV AGIB6672 30A
PDUV20HVL6-72 AGIB6672 20A
PDUMV30, PDUMV30-ISO AGPD6673 30A
PDUMV16HV, PDUMV20HV,
PDUMV20HVL6, PDUMV20HV-36
AGPD6674 20A
PDUMV30HV AGPD6675 30A

4
5
16
432
1NEMA 5-15/20R Outlet (PDUMV30, PDUMV30-ISO, PDUV30-36)
2C13 Outlet (PDUMV20HV, PDUV20HVL6-72, PDUMV20HVL6, PDUMV20HV-36,
PDUMV30HV, PDUV30HV)
3 C19 Outlet (PDUMV20HV, PDUV20HVL6-72, PDUMV20HVL6, PDUMV20HV-36,
PDUMV30HV, PDUV30HV)
4L5-30P, L6-20P or L6-30P Locking Plug
Features
Installation
Note: Regardless of configuration, the user must determine the
fitness of hardware and procedures before mounting. The PDU and
included hardware are designed for common rack and rack enclosure
types and may not be appropriate for all applications.
1A
Zero U Rack Configuration (Mounting Brackets).
Prior to installation, determine the rack location in which
the PDU is to be installed. Attach the mounting brackets
to the back of the PDU as shown, using the included
screws. To assist with proper positioning, the brackets
have four screw holes each; make sure that the same
two holes are used to attach each bracket to the PDU.
After attaching the brackets, position the PDU in the
rack and mount it by installing four user-supplied
fasteners through the brackets into the rack.
1B
Zero U Rack Configuration (Mounting Buttons).
Attach the included mounting buttons to the PDU.
Position the PDU as desired in the rack enclosure, align
the buttons with the rack mounting slots, and slide the
PDU into position.
1C
Under-Counter Configuration. The PDU may be
installed under a counter using the included mounting
brackets. Attach the mounting brackets to the back of
the PDU as shown in STEP 1A. Secure the PDU to the
underside of the counter by installing two user-supplied
screws through each bracket into the counter.
Note: Your model may differ.
1C
1B
1A

5
Features
PROTECTION
PRESENT FAULT
LINE
OK
7
5Circuit Breaker: If the current drawn by
the equipment connected to the PDU
exceeds the Maximum Load Rating, the
circuit breaker will trip to prevent possible
damage. When the circuit breaker trips,
its plunger will pop up. Disconnect excess equipment and allow the breaker to cool at
least one minute before depressing the plunger to reset the breaker.
6Ammeter: The total electrical current used by the PDU will be displayed on the digital
meter in amperes (select models only).
7Diagnostic Indicator Lights: The three
LEDs on the front panel show current
power conditions (from left to right):
Protection Present (Green LED): Indicates the surge-suppression components are
intact and providing full protection against spikes and surges. This LED should be lit
anytime the PDU is plugged in and power is present. If the Protection Present LED
does not light, then some of the surge suppression components are not functioning
and the unit should be returned for repair as soon as possible. You may still use the
unit; however, connected equipment will be protected from spikes and surges at a
lesser level than normal.
Line Fault (Red LED)*: Indicates a wiring fault has been detected. If this LED
illuminates at any time while the unit is plugged in, the fault should be repaired by a
qualified electrician as soon as possible. This LED indicates that phases are reversed,
ground is missing or some other sort of wiring error exists in the circuit the PDU is
plugged into. The Line Fault detector circuitry will identify most common wiring faults,
but will not necessarily detect every possible type of fault.
Line “OK” (Green LED): Indicates that nominal AC power is present with no wiring
faults detected. When this LED is illuminated, AC power is safe for connected
equipment.
* If the Line Fault (Red LED) indicator illuminates, carefully check the AC
receptacle the PDU is plugged into. The receptacle must be tight and securely
grounded. A loose AC receptacle may cause the Line Fault LED to illuminate.
The Red LED indicates the presence of a wiring fault, but does not indicate the
exact nature of the fault. Only qualified electricians should make necessary
outlet repairs.
If the Line Fault indicator illuminates and power is not present at the outlets, the
PDU’s surge-suppression components have been compromised as a result of
surge damage. For service, call Tripp Lite Customer Support at 773.869.1234 to
remedy the problem or receive instructions about return, repair or exchange.

6
LIMITED WARRANTY
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in
material and workmanship for a period of 5 years (except internal UPS system batteries outside USA and Canada,
1 year) from the date of initial purchase. If the product should prove defective in material or workmanship within that
period, Seller will repair or replace the product, in its sole discretion. Service under this Warranty can only be obtained by
your delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th Street,
Chicago, IL 60609 USA. Seller will pay return shipping charges. Visit tripplite.com/support before sending any equipment
back for repair.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE,
ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY
SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES,
INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE
WARRANTY PERIOD SET FORTH ABOVE; THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND
CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some
states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary
from jurisdiction to jurisdiction).
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or
safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no
representation or warranty as to the suitability or fitness of these devices for any specific application.
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for
a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a
unique series number. The series number can be found on the product nameplate label, along with all required approval
markings and information. When requesting compliance information for this product, always refer to the series number.
The series number should not be confused with the marking name or model number of the product.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and
illustrations may differ slightly from actual products.
TrippLite.Eaton.com/support
23-08-087 932685_RevL
Warranty & Product Registration

7
PDUs Básicos para Rack Vertical,
con Medidor Digital y con
Protección contra Sobretensiones
Isobar®
Modelos:
PDUMV30, PDUMV30HV, PDUV30HV, PDUV30-36,
PDUMV30-ISO, PDUMV20HV, PDUMV20HVL6,
PDUMV20HV-36, PDUV20HVL6-72
(Número de Serie: AGIB6672, AGPD6673, AGPD6674)
Instrucciones de seguridad 8
importantes
Advertencias importantes 8
Instalación 10
Características 10
Garantía 12
English 1
Français 13
Русский 19
Deutsch 25
TrippLite.Eaton.com/support
© 2023 Tripp Lite. Todos los derechos reservados.
Manual del propietario

8
GUARDE ESTAS INSTRUCCIONES
Este manual contiene instrucciones y advertencias que deben
seguirse durante la instalación, operación y almacenamiento de este
producto. De no seguirlas, se anulará la garantía del producto.
PRECAUCION Este aparato no se destina para utilizarse por personas
(incluyendo niños), cuyas capacidades fisicas, sensoriales o mentales sean
diferentes o estén reducidas, o carezcan de experiencia o conocimiento, a menos
que dichas personas reciban una supervisión o capacitación para el funcionamiento
del aparato por una persona responsable de su seguridad. Los ninos deben de
supervisarse para asegurar que no empleen el aparato como juguete.
No instale este dispositivo si no hay al menos 10 m [30 pies] o más de cable entre
el tomacorriente y el tablero de servicio eléctrico.
Nunca utilize el aparato si el cable y la clavija están dañados; si no funciona
correctamente o si se ha caido o dañado, llévelo a un centro de servicio
autorizado para que lo examinen y lo reparen.
Si el cordon de alimentación es dañado, éste debe sustituirse por el fabricante,
por su agente de servicio autorizado o por personal calificado con el fin de evitar
un peligro.
• La PDU proporciona cómodas salidas múltiples, pero NO proporciona protección contra
sobretensión o ruido en la línea al equipo conectado.
• Los PDUs que no son ISO no proporcionan protección contra sobretensiones y de línea
al equipo conectado.
• La PDU está diseñada sólo para empleo en interiores en un ambiente controlado, lejos
del exceso de humedad, temperaturas extremas, contaminantes conductores, polvo o
luz solar directa.
• El PDU debe ser instalado solamente por un técnico calificado.
• Instale conforme a los estándares del Código Eléctrico Nacional. Asegúrese de usar la
protección adecuada contra sobrecorriente para la instalación, de conformidad con la
especificación de la clavija y del equipo.
• Conecte el PDU a un tomacorrientes que cumpla con los códigos locales de
construcción y que esté correctamente protegido contra corrientes excesivas,
cortocircuitos y fallas de conexión a tierra.
• Mantiene las temperaturas ambiente interiores entre 0 °C y 25 °C [32 °F y 77 °F].
• El uso de este equipo en aplicaciones de soporte de vida en donde la falla de este
equipo pueda razonablemente hacer suponer que causará fallas en el equipo de
soporte de vida o afecte significativamente su seguridad o efectividad, no está
recomendado. No use este equipo en la presencia de una mezcla anestésica inflamable
con aire, oxigeno u óxido nitroso..
Instrucciones de seguridad importantes
Advertencias importantes

9
Advertencias importantes
• No conecte la PDU a una salida sin conexión a tierra ni a cables de extensión o
adaptadores que eliminen la conexión a tierra.
• El requisito de potencia de cada equipo conectado a la PDU no debe exceder la
capacidad de carga individual de la salida.
• El requisito de potencia total para el equipo conectado a la PDU no debe exceder la
máxima capacidad de carga para la PDU.
• La clavija en el cable de alimentación sirve como dispositivo de desconexión.
• Los tomacorrientes eléctricos que alimentan al equipo deben estar cerca del equipo y
ser fácilmente accesibles.
• No taladre ni trate de abrir ninguna parte de la cubierta de la PDU. No hay partes en su
interior que requieran mantenimiento por parte del usuario.
• No intente modificar la PDU, incluyendo los enchufes de entrada y los cables de alimentación.
• No intente usar la PDU si alguno de sus componentes está dañado.
• No intente montar la PDU en una superficie insegura o inestable.
• Nunca intente instalar equipos eléctricos durante una tormenta eléctrica.
• Instale de acuerdo con los Códigos Eléctricos Nacionales (NEC). Para la instalación,
asegúrese de usar la protección adecuada contra sobrecorrientes, de conformidad con
la especificación de la clavija y del equipo que se indica a continuación.
Modelo Número de serie Protección contra Sobrecorriente
PDUV30HV AGIB6672 30A
PDUV20HVL6-72 AGIB6672 20A
PDUMV30, PDUMV30-ISO AGPD6673 30A
PDUMV16HV, PDUMV20HV,
PDUMV20HVL6, PDUMV20HV-36
AGPD6674 20A
PDUMV30HV AGPD6675 30A

10
5
16
432
1Salidas de CA NEMA 5-15/20R (PDUMV30, PDUMV30-ISO, PDUV30-360)
2Salidas de CA C13 (PDUMV20HV, PDUV20HVL6-72, PDUMV20HVL6,
PDUMV20HV-36, PDUMV30HV, PDUV30HV)
3 Salidas de CA C19 (PDUMV20HV, PDUV20HVL6-72, PDUMV20HVL6,
PDUMV20HV-36, PDUMV30HV, PDUV30HV)
4Enchufes de entrada L5-30P, L6-20P o L6-30P
Características
Instalación
Nota: Independientemente de la configuración, el usuario debe
determinar la idoneidad de los materiales y accesorios así como de
los procedimientos antes del montaje. La PDU y el material incluido
están diseñados para racks (bastidores) y cajas de rack (bastidor)
comunes, y pueden no ser apropiados para todas las aplicaciones.
1A
Configuración Cero U para Rack (Soportes de
Montaje). Antes de la instalación determine la
ubicación en el rack en donde el PDU va a ser
instalado. Fije los soportes de montaje al respaldo del
PDU utilizando los tornillos incluidos, como se muestra.
A fin de facilitar una colocación adecuada, cada soporte
tiene cuatro perforaciones para los tornillos; asegúrese
que las mismas dos perforaciones son usadas para
fijar cada soporte al PDU. Después de fijar los
soportes, coloque el PDU en su lugar en el rack y
móntelo instalando cuatro tornillos, suministrados por el
usuario, a través de los soportes en el rack.
1B
Configuración para bastidor Cero U (Botones de
Montaje). Fije los botones de montaje, incluidos, al PDU.
Coloque el PDU en la posición deseada en el bastidor,
alinee los botones con las ranuras de montaje del
bastidor, deslice el PDU para posicionarlo correctamente.
1C
Configuración Bajo el Escritorio. El PDU puede
instalarse bajo un escritorio utilizando los soportes de
montaje incluidos. Fije los soportes de montaje a la
parte trasera del PDU como se muestra en el paso 1A.
Asegure el PDU abajo del escritorio instalando dos
tornillos, suministrados por el usuario, a través de
soporte en el escritorio.
Nota: Su modelo puede variar.
1C
1B
1A