Tripp Lite B320-4X1-HH-K1 User manual

1
4-Port
Presentation Switch
Model: B320-4X1-HH-K1, B320-4X1-HH-K2,
B320-4X1-MH, B320-4X1-MHB-K,
B320-4X1-MHE-K
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2020 Tripp Lite. All rights reserved.
Este manual esta disponible en español en la página de Tripp Lite:
tripplite.com /support
Ce manuel est disponible en français sur le site Web de Tripp Lite :
tripplite.com /support
Owner’s Manual
Русскоязычная версия настоящего руководства представлена на веб-сайте
компании Tripp Lite по адресу: tripplite.com /support
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty
20-05-301-93-3C5E.indd 120-05-301-93-3C5E.indd 1 6/2/2020 11:36:44 AM6/2/2020 11:36:44 AM

2
• B320-4X1-Series Presentation Switch
• IR Remote Control
• IR Receiver Cable, 5 ft.
• International Power Supply (Input: 100–240V; Output: 24V 1A)
• (x4) International Plug Adapters (North America, U.K., Europe,
Australia)
• Mounting Hardware
• Owner’s Manual
Package Contents
• N202-Series Cat6 24 AWG Solid-Wire Patch Cables
• P569-XXX-CERT Series High-Speed HDMI 2.0 Cables
• P580-Series DisplayPort Cables with Latches
• P502-XXX-SM 15-Pin Low-Profile VGA Coaxial Cables
• U420-Series USB-C 3.1 Gen 1/2 Cables
• P312-Series 3.5 mm Audio Cables
Optional Accessories
20-05-301-93-3C5E.indd 220-05-301-93-3C5E.indd 2 6/2/2020 11:36:44 AM6/2/2020 11:36:44 AM

3
B320-4X1-HH-K1
4-Port 4K @ 60 Hz HDMI over Cat6 PoC Presentation Switch/Extender Kit,
50 ft.
• Connects up to 4 HDMI sources to a single HDMI display up to 50 ft.
away via Cat6 cabling.
• Switches between 4 sources using the front-panel pushbuttons, IR
remote control or RS-232 commands.
• Power over Cable (PoC) technology provides power to the receiver via
Cat6 cable.
• Remote receiver unit features built-in equalization (EQ) control and auto
EDID image adjustment.
• Supports true 4K resolutions up to 3840 x 2160 @ 60 Hz with 4:4:4
chroma subsampling.
• HDMI 2.0 and HDCP 2.2 compliant.
• Plug-and-play operation with no software required for easy, immediate
installation.
B320-4X1-HH-K2
4-Port 4K @ 60 Hz HDMI over Cat6 PoC Presentation Switch/Extender Kit,
125 ft.
• Connects up to 4 HDMI sources to a single HDMI display up to 125 ft.
away via Cat6 cabling.
• Switches between 4 sources using the front-panel pushbuttons, IR
remote control or RS-232 commands.
• Power over Cable (PoC) technology provides power to the receiver via
Cat6 cable.
• Remote receiver unit features built-in equalization (EQ) control and auto
EDID image adjustment.
• Supports true 4K resolutions up to 3840 x 2160 @ 60 Hz with 4:4:4
chroma subsampling.
• HDMI 2.0 and HDCP 2.2 compliant.
• Plug-and-play operation with no software required for easy, immediate
installation.
Product Features
20-05-301-93-3C5E.indd 320-05-301-93-3C5E.indd 3 6/2/2020 11:36:44 AM6/2/2020 11:36:44 AM

4
Product Features
B320-4X1-MH
4-Port Multi-Format Presentation Switch
• Connects up to 4 sources to a single HDMI display.
• Switches between 4 sources using the front-panel pushbuttons, IR
remote control or RS-232 commands.
• Supports true 4K HDMI, DisplayPort and USB-C™ resolutions up to
4096 x 2160 @ 60 Hz with 4:4:4 chroma subsampling.
• Supports 1080p VGA resolutions up to 1920 x 1080 @ 60 Hz.
• USB-C PD 3.0 port supports up to 100W (20V 5A) and provides 90W
of charging power to the USB-C source.*
• Plug-and-play operation with no software required for easy, immediate
installation.
*10W is reserved for the functionality of the USB Type-C™ chipset system.
B320-4X1-MHB-K
4-Port Multi-Format PoC Presentation Switch/Extender Kit, 50 ft.
• Connects up to 4 sources to a single HDMI display up to 50 ft. away via
Cat6 cabling.
• Switches between 4 sources using the front-panel pushbuttons, IR
remote control or RS-232 commands.
• Power over Cable (PoC) technology provides power to the receiver via
Cat6 cable.
• Remote receiver unit features built-in equalization (EQ) control and auto
EDID image adjustment.
• Supports true 4K HDMI, DisplayPort and USB-C resolutions up to 3840
x 2160 @ 60 Hz with 4:4:4 chroma subsampling.
• Supports 1080p VGA resolutions up to 1920 x 1080 @ 60 Hz.
• USB-C PD 3.0 port supports up to 100W (20V 5A) and provides 90W
of charging power to the USB-C source.*
• Plug-and-play operation with no software required for easy, immediate
installation.
*10W is reserved for the functionality of the USB Type-C chipset system.
20-05-301-93-3C5E.indd 420-05-301-93-3C5E.indd 4 6/2/2020 11:36:44 AM6/2/2020 11:36:44 AM

5
Product Features
B320-4X1-MHE-K
4-Port Multi-Format PoC Presentation Switch/Extender Kit, 125 ft.
• Connects up to 4 sources to a single HDMI display up to 125 ft. away
via Cat6 cabling.
• Switches between 4 sources using the front-panel pushbuttons, IR
remote control or RS-232 commands.
• Power over Cable (PoC) technology provides power to the receiver via
Cat6 cable.
• Remote receiver unit features built-in equalization (EQ) control and auto
EDID image adjustment.
• Supports true 4K HDMI, DisplayPort and USB-C resolutions up to 3840
x 2160 @ 60 Hz with 4:4:4 chroma subsampling.
• Supports 1080p VGA resolutions up to 1920 x 1080 @ 60 Hz.
• USB-C PD 3.0 port supports up to 100W (20V 5A) and provides 90W
of charging power to the USB-C source.*
• Plug-and-play operation with no software required for easy, immediate
installation.
*10W is reserved for the functionality of the USB Type-C chipset system.
20-05-301-93-3C5E.indd 520-05-301-93-3C5E.indd 5 6/2/2020 11:36:44 AM6/2/2020 11:36:44 AM

6
Mounting Instructions
These 4-port presentation switches include hardware for mounting on a
wall, pole or 19-inch rack. The following images illustrate how the included
hardware can be attached for different installations.
Note: The models shown below are for illustrative purposes only. Your
product may vary by model number, size or port orientation. The mounting
options for all B320-Series switches are the same.
Wall-mount
19” Rack-mount Pole-mount
20-05-301-93-3C5E.indd 620-05-301-93-3C5E.indd 6 6/2/2020 11:36:45 AM6/2/2020 11:36:45 AM

7
B320-4X1-HH-K1
& B320-4X1-HH-K2
extender kit
Up to 50 ft. (15 m) Cat6 cable at 4K/60Hz
Up to 125 ft. (38 m) Cat6 cable at 4K/60Hz
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60Hz
RS-232 cable
SWITCH RECEIVER
Installation
Refer to the following steps and diagram to set up your 4-port presentation
switch installation.
Installation Instructions for B320-4X1-HH-K1 &
B320-4X1-HH-K2
Notes:
1. Test to ensure the entire installation works properly before pulling
cables through ceilings/walls.
2. To achieve maximum distance and performance, use 24 AWG solid-
wire Cat6 cables. Using stranded-wire Cat6 cable or cable with a gauge
(AWG) size higher than 24 AWG will result in shorter extension distance.
Higher-gauge cabling, such as 26 AWG, has more limited transmission
capability than lower-gauge cabling. All Tripp Lite N202-Series Cat6
cables are made with 24 AWG solid-wire cabling.
3. External power is not required for remote receiver units, due to PoC
technology incorporated in the transmitter units.
20-05-301-93-3C5E.indd 720-05-301-93-3C5E.indd 7 6/2/2020 11:36:45 AM6/2/2020 11:36:45 AM

8
Installation
1. Make sure all equipment in the installation is powered off.
2. Connect the HDMI source to INPUT 1 on the presentation switch with a
user-supplied HDMI cable.
3. Repeat Step 2 for INPUT ports 2, 3 and 4.
4. Connect the RJ45 port on the presentation switch to the RJ45 port on
the remote receiver with a user-supplied Cat6 cable. Note: Maximum
transmission distance via Cat6 cabling for the B320-4X1-HH-K1 and
B320-4X1-HH-K2 is 50 ft. and 125 ft., respectively.
5. Connect the remote receiver’s HDMI port to a display with a user-
supplied HDMI cable.
6. (Optional) If the B320-4X1-Series switch is not in line of sight, connect the
included IR receiver cable to the IR-IN port for more reliable IR reception.
7. (Optional) If you wish to control the B320-4X1-Series switch from your
computer, connect a user-supplied DB9 cable to the RS-232 port. See
RS-232 Commands for more information.
8. Turn on the power to all connected devices in the installation. Then,
connect the included external power supply to the switch transmitter unit.
9. The Power LED will illuminate green, indicating the unit is receiving
sufficient power, and Input LEDs will illuminate orange, indicating a
signal is being received from the sources.
20-05-301-93-3C5E.indd 820-05-301-93-3C5E.indd 8 6/2/2020 11:36:45 AM6/2/2020 11:36:45 AM

9
Installation
Installation Instructions for B320-4X1-MH,
B320-4X1-MHB-K & B320-4X1-MHE-K
Notes:
1. Test to ensure the entire installation works properly before pulling
cables through ceilings/walls.
2. To achieve maximum distance and performance, use 24 AWG solid-
wire Cat6 cables. Using stranded-wire Cat6 cable or cable with a gauge
(AWG) size higher than 24 AWG will result in shorter extension distance.
Higher-gauge cabling, such as 26 AWG, has more limited transmission
capability than lower-gauge cabling. All Tripp Lite N202-Series Cat6
cables are made with 24 AWG solid-wire cabling.
3. External power is not required for remote receiver units due to PoC
technology incorporated in the transmitter units.
B320-4X1-MH switch
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60Hz
Up to 15 ft. (4.5 m) DisplayPort cable at 4K/60Hz
Up to 15 ft. (4.5 m) VGA cable at 1080p/60Hz
Up to 6ft. (4.5 m) USB Type-C cable at 4K/60Hz
Up to 30 ft. (9 m) HDMI 2.0 cable at 4K/60Hz
RS-232 cable
20-05-301-93-3C5E.indd 920-05-301-93-3C5E.indd 9 6/2/2020 11:36:45 AM6/2/2020 11:36:45 AM

10
Installation
B320-4X1-MHB-K
& B320-4X1-MHE-K
extender kit
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60Hz
Up to 15 ft. (4.5 m) DisplayPort cable at 4K/60Hz
Up to 15 ft. (4.5 m) VGA cable at 1080p/60Hz
Up to 6ft. (4.5 m) USB Type-C cable at 4K/60Hz
Up to 50 ft. (15 m) Cat6 cable at 4K/60Hz
Up to 125 ft. (38 m) Cat6 cable at 4K/60Hz
RS-232 cable
SWITCH RECEIVER
1. Make sure all equipment in the installation is powered off.
2. Connect the HDMI source to HDMI IN with a user-supplied HDMI cable.
3. Connect the DisplayPort source to DP IN with a user-supplied
DisplayPort cable.
4. Connect the USB-C source to TYPE-C IN with a user-supplied USB-C cable.
5. (Optional) Connect your USB-C source’s power adapter to CHARGE IN,
supporting up to 100W (20V 5A) and supplying up to 90W of power to
your USB-C source.
6. Connect the VGA source to VGA IN with a user-supplied VGA cable.
Then connect the VGA source’s Audio Out port to VGA AUDIO with a
user-supplied 3.5 mm audio cable. Note: 15-pin VGA cables must be
used. 14-pin VGA cables will not work.
20-05-301-93-3C5E.indd 1020-05-301-93-3C5E.indd 10 6/2/2020 11:36:45 AM6/2/2020 11:36:45 AM