Tripp Lite N252-048-SH-K User manual

1
Installation Guide
48-Port Cat6 Krone IDC STP
High-Density 1U Patch Panel
Model: N252-048-SH-K
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved.
Este guía esta disponible en español en la página de Tripp Lite:
www.tripplite.com/support
Ce guide est disponible en français sur le site Web de Tripp Lite :
www.tripplite.com/support
Русскоязычная версия настоящего краткого руководства
представлена на веб-сайте компании Tripp Lite по адресу:
www.tripplite.com/support
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
18-10-102-9338CD-EN.indd 1 11/2/2018 12:15:47 PM

2
Installation
1Separate the grounding wire (lug) and shielded cap
from the top.
2Separate the 2-layer panel.
18-10-102-9338CD-EN.indd 2 11/2/2018 12:15:48 PM

3
Installation
3Prepare cables.
5 cm
Drain Wire
Remove approximately
5 cm of cable sheath.
Roll the exposed foil back along
the cable sheath.
Separate the conductors.
4Secure drain wires.
Drain
Wire
Drain
Wire
Punch down
with a proper
impact tool.
Hook grounding wires
on the rear edge of
the panel.
18-10-102-9338CD-EN.indd 3 11/2/2018 12:15:52 PM

4
Installation
5Make sure the drain wire is tied between the panel
and the rear cable manager.
Drain
Wire
Drain
Wire
18-10-102-9338CD-EN.indd 4 11/2/2018 12:15:53 PM

5
Installation
6Use the included screws to combine the two patch
panel layers.
18-10-102-9338CD-EN.indd 5 11/2/2018 12:15:55 PM

6
Installation
7Use the included screws to attach the cap and
grounding wire.
Grounding Wire
18-10-102-9338CD-EN.indd 6 11/2/2018 12:15:56 PM

7
Installation
8Attach the panel and grounding wire to a rack or
cabinet.
Grounding Wire
18-10-102-9338CD-EN.indd 7 11/2/2018 12:15:56 PM

8
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
18-10-102 93-38CD_RevA
Warranty and Product Registration
Lifetime Limited Warranty
Tripp Lite warrants its products to be free from defects in materials and workmanship for
life. Tripp Lite’s obligation under this warranty is limited to repairing or replacing (at its
sole option) any such defective products. To obtain service under this warranty, you must
obtain a Returned Material Authorization (RMA) number from Tripp Lite or an authorized
Tripp Lite service center. Products must be returned to Tripp Lite or an authorized Tripp
Lite service center with transportation charges prepaid and must be accompanied by a
brief description of the problem encountered and proof of date and place of purchase.
This warranty does not apply to equipment, which has been damaged by accident,
negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, Tripp Lite MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the
purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL Tripp Lite BE LIABLE FOR DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Specifically, Tripp Lite is not liable for any costs, such as lost profits or revenue,
loss of equipment, loss of use of equipment, loss of software, loss of data, costs of
substitutes, claims by third parties, or otherwise.
Product Registration
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change
without notice.
18-10-102-9338CD-EN.indd 8 11/2/2018 12:15:57 PM