Triumph 45-6843W User manual

888-996-2729-1
1353-378-668-1:XAF
moc.stropsedalacse@gameroom
ytilauqtsehgihehtfoerastcudorpruotahterusneotevirtseW
fi,revewoH.strapgnissimrostcefedgnirutcafunamfoe
erfdna
,tcudorpwenruoyhtiwsmelborpynaevahuoy
EROTSEHTOTTINRUTERTONOD ,
:@eerfllotsutcatnocesaelp
:otetirwrO
stropSedalacsE
tnemtrapeDecivreSremotsuC
988xoB.O.P
60774NI,ellivsnavE
date code (if,rebmunledomruoyedivorpesaelpstropSedalacsEgnitcatnocnehW
erasrebmunesehT.traptnemecalp
eragnitseuqerfirebmuntrapdna,)elbacilppa
.launamsrenwosihtnidna,gnigakcap,tcudorpehtnodetacol
rebmuNledoMruoY
.straptuobagniriuqninehwdate coderuoyevahesaelP
45-6843W
888-996-2729-1llaCecivreSremotsuCroF1stropSedalacsE1602©
Date Code: 2 - 45-6843W - 0716 - HL
All Rights Reserved
Purchase Date:
PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

Make sure you understand the following tips before you begin to assemble your soccer table.
1. Start all bolts by hand before tightening.
2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS BREAKAWAY MLS SOCCER TABLE
Assembly Tips
Tools Required:
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO PUT THIS SOCCER TABLE
TOGETHER.
T1 - Allen Wrench (Included)
IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.
© 2016 Escalade Sports For Customer Service Call 1-888-996-2729
Phillips Screwdriver
Furniture Polish and Cloth
2
All Rights Reserved.
ATTENTION:
FEATURING:
Quick Connect Leg Assembly & Quick Connect Player Rod Assembly.
These designs are customer friendly and will greatly reduce assembly time.

Head Screw
HARDWARE IDENTIFIER
(To Scale)
©2016 Escalade Sports For Customer Service Call 1-888-996-2729
3
All Rights Reserved.
H1 - 4 mm x 40 mm
Phillips Flat
Head Screw
(36 pcs)
(Not to Scale)
ACCESSORIES IDENTIFIER
(Not to Scale)
A1- Soccer Ball (4 pcs)
!
WARNING:
CHOKING HAZARD
Small parts.
Not for children under 3 yrs.
H2 - 3.5 mm x 12 mm
Phillips Round
Head Screw
(8 pcs)
H
HH
HH8 - 3.5 mm x 12 mm
Phillips Flat
Head Screw
(4 pcs)
T1 - Allen Wrench
(1 pc)
3- 8 mm x 45 mm
Allen Head Bolt
(4 pcs)
H4 - 8.5 mm x 22 mm
Flat Washer
(12 pcs)
5 - 8.5 mm
Lock Washer
(4 pcs)
7- 3.5 mm x 18 mm
6- 8 mm x 30 mm
Allen Head Bolt
(8 pcs)
Phillips Flat
(4 pcs)

PARTS IDENTIFIER
(Not to Scale)
© 2016 Escalade Sports For Customer Service Call 1-888-996-2729
4
All Rights Reserved.
P1A - 10 logos graphic
Side Apron (1 pc)
P1B - 11 logos graphic
Side Apron (1 pc)
P2 - End Apron
(2 pcs)
P3 - Playfield (1 pc)
P7 - Playfield Support
Brace (2 pcs)
P9 - 3 Player
White Shirt / Black Short
(2 pcs)
** With Quick Connect
Rod Bushings &
Rod Handle **
P4 - Left Leg
(2 pcs)
P10 - 2 Player
White Shirt / Black Short
(1 pc)
** With Quick Connect
Rod Bushings &
Rod Handle **
P11 - 5 Player
White Shirt / Black Short
(1 pc)
** With Quick Connect
Rod Bushings &
Rod Handle **
P13 - 3 Player
Red Shirt / Black Short
(2 pcs)
** With Quick Connect
Rod Bushings &
Rod Handle **
P16 - Ball Entry
Cup (2 pcs)
!
WARNING:
CHOKING HAZARD
Small parts.
Not for children under 3 yrs.
P14 - 2 Player
Red Shirt / Black Short
(1 pc)
** With Quick Connect
Rod Bushings &
Rod Handle **
P15 - 5 Player
Red Shirt / Black Short
(1 pc)
** With Quick Connect
Rod Bushings &
Rod Handle **
P12 - Manual
Scorer (2 pcs)
P5 - Right Leg
(2 pcs)
P6 - End Leg Panel
(2 pcs)
P8 - Leg Leveler
(4 pcs)

© 2016 Escalade Sports For Customer Service Call 1-888-996-2729
5
All Rights Reserved.
PARTS REQUIRED:
10 pcs - H1 Phillips Flat Head Screw
1 pc - P1A 10 Logos Graphic Side Apron
1 pc - P1B 11 Logos Graphic Side Apron
1 pc - P2 End Apron
FIGURE 1
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY SET P3 PLAYFIELD INTO THE GROOVES
IN P1 SIDE APRONS.
ATTENTION:
STEP 1:
Find a clean, level place to begin the assembly of
your soccer table. We recommend building the
table on the box top to protect the parts
during assembly.
It is very important to assemble table on
a level and flat surface. This will keep
the end aprons and side aprons
“FLUSH” on the top and bottom edges.
Attach P1A &P1B Side Aprons onto
P2 End Apron using H1 Screws as shown in FIGURE 1.
Tighten, but do not strip out H1 Screws.
P2
H1
H1
H1
P1A
P1B
PARTS REQUIRED:
1 pc - P3 Playfield
STEP 2:
Set P3 Playfield into the grooves in P1A & P1A Side Aprons as shown in FIGURE 2.
P1A
P1B
P3
NOTE:
Playfield Graphic on
the underside facing the floor
FIGURE 2
All edges must
be assembled FLUSH
with each other
IMPORTANT NOTE: Be sure H1 Screws
are screwed “FLUSH” for later Leg assembly.
NOTE:
All H1 Screws must be
installed flush with cabinet.
H1

© 2016 Escalade Sports For Customer Service Call 1-888-996-2729
6
All Rights Reserved.
PARTS REQUIRED:
10 pcs - H1 Phillips Flat Head Screw
1 pc - P2 End Apron
IMPORTANT NOTE:
Be sure H1 Screws are screwed “FLUSH” for later Leg assembly.
Be sure P3 Playfield is centered before tightening H1 Screws.
STEP 3:
Attach P2 End Apron onto P1 Side Aprons using H1 Screws as shown
in FIGURE 3.
Tighten, but do not strip out H1 Screws.
FIGURE 3
H1
H1
H1
H1
P2
P1A
P1B
PARTS REQUIRED:
16 pcs - H1 Phillips Flat Head Screw
STEP 4:
Center and attach P3 Playfield in the cabinet using pre-drilled pilot
holes with H1 Sscrews as shown in FIGURE 4.
Tighten, but do not strip out H1 Screws.
IMPORTANT NOTE:
Please be sure to install H1 Screws
exactly as per FIGURE 4.
Screws must be screwed straight down.
H1
H1
FIGURE 4
P3
NOTE:
All H1 Screws must be
installed flush with cabinet.
NOTE:
All edges must be assembled
“FLUSH” with each other.
PLAYFIELD MUST BE CENTERED
PLAYFIELD MUST BE CENTERED
CENTERED BEFORE INSTALLING
H1 SCREWS.

© 2016 Escalade Sports For Customer Service Call 1-888-996-2729
7
All Rights Reserved.
PARTS REQUIRED:
8 pcs - H2 Phillips Round Head Screw
2 pcs - P7 Playfield Support Brace
STEP 5:
Attach P7 Playfield Support Braces onto P1 Side Aprons
using pre-drilled pilot holes with H2 Screws as shown
in FIGURE 5.
Tighten, but do not strip out H2 Screws.
FIGURE 5
H2
H2
P5
P5
PARTS REQUIRED:
4 pcs - H3 Allen Head Bolts 4 pcs - H5 Lock Washer 2 pcs - P5 Right Leg
4 pcs - H4 Flat Washer 2 pcs - P4 Left Leg 1 pc - T1 Allen Wrench
STEP 6:
Attach P4 Left Legs and P5 Right Legs onto P1 Side Aprons and P2 End Aprons as
shown in FIGURE 6 and DETAIL A.
Secure P4 Left Legs and P5 Right Legs using H3 Allen Head Bolts, H5 Lock Washers
and H4 Flat Washers as shown in FIGURE 6.
Use T1 Allen Wrench to tighten P4 & P5 Legs.
H3
H4
H5
P5
P4
P4
P5
P4
P2
P1 DETAIL A
NOTE:
Carefully align the inner locks and push down
on leg to correctly “Lock” the inner lock leg
design.
LEG
NOTE:
Please study this diagram
for correct assembly.
NOTE:
Please watch closely that both
male inner locks on the leg are
correctly inside of and locked
into the female counter part.
FIGURE 6

© 2016 Escalade Sports For Customer Service Call 1-888-996-2729
8
All Rights Reserved.
PARTS REQUIRED:
4 pcs - P8 Leg Levelers
STEP 7:
Thread P8 Leg Levelers onto P4 Left Legs and P5 Left Legs
as shown in FIGURE 7.
FIGURE 7
P5
P4
P5
P4
P8
P8
P8
P8
PARTS REQUIRED:
8 pcs - H4 Flat Washer 2 pcs - P6 End Leg Panel
8 pcs - H6 Allen Head Bolt 1 pc - T1 Allen Wrench
STEP 8:
Attach P6 End Leg Panels onto P4 Left Legs and P5 Left Legs
using H6 Allen Head Bolts with H4 Flat Washers as shown
in FIGURE 8.
Tighten all H6 Bolts using T1 Allen Wrench.
FIGURE 8
P5
P4
P5
P4
H4
H6
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
CAUTION:
H4 H6
H6
H4
H4
H6
Graphics must be upside
down and face outside.
Graphics must be upside
down and face outside.
P6
P6

© 2016 Escalade Sports For Customer Service Call 1-888-996-2729
9
All Rights Reserved.
PARTS REQUIRED:
4 pcs - H7 Phillips Flat Head Screw 2 pcs - P12 Manual Scorer
4 pcs - H8 Phillips Flat Head Screw 2 pcs - P13 3-Red Shirt / Black Short Player Rod Assembly
2 pcs - P9 3-White Shirt / Black Short Player Rod Assembly 1 pc - P14 2-Red Shirt / Black Short Player Rod Assembly
1 pc - P10 2-White Shirt / Black Short Player Rod Assembly 1 pc - P15 5-Red Shirt / Black Short Player Rod Assembly
1 pc - P11 5-White Shirt / Black Short Player Rod Assembly 2 pcs - P16 Ball Entry Cup
STEP 9:
Attach P9 3-White Shirt / Black Short Player Rod Assemblies, P10 2-White Shirt / Black Short Player Rod Assembly and
P11 5-White Shirt / Black Short Player Rod Assembly as shown in FIGURE 9 , PLACEMENT OF PLAYERS AND QUICK
CONNECT ROD BUSHINGS ASSEMBLY IN DETAIL B.
Attach P13 3-Red Shirt / Black Short Player Rod Assemblies, P14 2-Red Shirt / Black Short Player Rod Assembly and
P15 5-Red Shirt / Black Short Player Rod Assembly as shown in FIGURE 9 , PLACEMENT OF PLAYERS AND QUICK
CONNECT ROD BUSHINGS ASSEMBLY IN DETAIL B.
Attach P12 Manual Scorers on P2 End Aprons using pre-drilled pilot holes with H7 Screws as shown in FIGURE 9.
Tighten, but do not strip out H7 Screws.
Attach P16 Ball Entry Cups on P1 Side Aprons using pre-drilled pilot holes with H8 Screws as shown in FIGURE 9.
Tighten, but do not strip out H8 Screws.
= RED SHIRT/
BLACK SHORT
= WHITE SHIRT/
BLACK SHORT
P9
DETAIL B
DETAIL C
P10
P11
P9
P13
P13
P14
P15
ORDER OF PLAYERS
(OVERHEAD VIEW)
H7
P12
P16
H8
C1
C2
C3
C4
C5
C6
C8
C7
IMPORTANT NOTE: PLEASE BE SURE THIS LOCKING TAB
CORRECTLY LOCKS INTO THE OPPOSITE HOLE.
STUDY DIAGRAM CLOSELY
FOR CORRECT SOCCER
PLAYER ROD PLACEMENT.
FOR “EASE OF ASSEMBLY”, YOU WILL NOW EXPERIENCE THE TECHNOLOGY OF THE
“QUICK CONNECT ROD ASSEMBLY”.
FIGURE 9

© 2016 Escalade Sports For Customer Service Call 1-888-996-2729
All Rights Reserved.
10
Congratulations! You have now assembled your soccer table. Please note the Care and Use
instructions below to insure many years of trouble free use of your soccer table.
CARE AND USE OF YOUR BREAKAWAY MLS SOCCER TABLE
1. Apply a few drops of lubricant (not provided) to the rods and the bushings.
Rotate rods to make sure you spread lubricant evenly.
2. Use spray furniture polish to clean all exterior surfaces of your soccer table.
3. Use a carpenters level to properly level table using the leg levelers.
4. This product is intended for INDOOR use only.
5. DO NOT sit, climb or lean on the table.
6. DO NOT drag the table when moving it. This will damage the legs.
7. DO NOT set drinks on the table.
Description Qty.
H1
H2
H3
H4
H5
H6
H7
H8
T1
P1A
P1B
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
A1
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
K1
M1
Key # Part #
PRODUCT PARTS LIST FOR MODEL # 45-6843W
45-6843HLH1
45-6843HLH2
45-6843HLH3
45-6843HLH4
45-6843HLH5
45-6843HLH6
45-6843HLH7
45-6843HLH8
45-6843HLT1
45-6843HLP1A
45-6843HLP1B
45-6843HLP2
45-6843HLP3
45-6843HLP4
45-6843HLP5
45-6843HLP6
45-6843HLP7
45-6843HLP8
45-6843HLP9
45-6843HLP10
45-6843HLP11
45-6843HLP12
45-6843HLP13
45-6843HLP14
45-6843HLP15
45-6843HLP16
45-6843HLA1
45-6843HLC1
45-6843HLC2
45-6843HLC3
45-6843HLC4
45-6843HLC5
45-6843HLC6
45-6843HLC7
45-6843HLC8
45-6843HLC9
45-6843HLC10
45-6843HLK1
45-6843HLM1
4 mm x 40 mm Phillips Flat Head Screw
3.5 mm x 12 mm Phillips Round Head Screw
8 mm x 45 mm Allen Head Bolt
8.5 mm x 22 mm Flat Washer
8.5 mm Lock Washer
8 mm x 30 mm Allen Head Bolt
3.5 mm x 18 mm Phillips Flat Head Screw
3.5 mm x 12 mm Phillips Flat Head Screw
Allen Wrench
10 logos graphic Side Apron
11 logos graphic Side Apron
End Apron
Playfield
Left Leg
Right Leg
Eng Leg Panel
Playfield Support Brace
Leg Leveler
3-Player White Shirt / Black Short Rod Assembly
2-Player White Shirt / Black Short Rod Assembly
5-Player White Shirt / Black Short Rod Assembly
Manual Scorer
3-Player Red Shirt / Black Short Rod Assembly
2-Player Red Shirt / Black Short Rod Assembly
5-Player Red Shirt / Black Short Rod Assembly
Ball Entry Cup
Soccer Ball
Male Rod Bushing (Pre-Inslalled)
Female Rod Busing (Pre-Inslalled)
Rod Bumper (Pre-Inslalled)
Rod Washer (Pre-Inslalled)
Rod End Cap (Pre-Inslalled)
Rod Handle (Pre-Inslalled)
Ivory Player (Pre-Inslalled)
Black Player (Pre-Inslalled)
4mm x 25mm Phillips Round Head Bolt (Pre-Installed)
4mm Lock Nut (Pre-Installed)
Hardware Kit
Owner’s Manual
36
8
4
12
4
8
4
4
1
1
1
2
1
2
2
2
2
4
2
1
1
2
2
1
1
2
4
16
16
16
16
8
8
13
13
26
26
1
1

© 2016 Escalade Sports For Customer Service Call 1-888-996-2729
11
All Rights Reserved.
This consumer warranty extends to the original consumer purchase of any ESCALADESPORTS
Product (hereinafter referred as the "Product").
WARRANTY DURATION: This Product is warranted to the original consumer purchase of a pe-
riod of 90 days from the original purchase.
WARRANTY COVERAGE: ESCALADE SPORTS warrants to the original Consumer Purchaser
that any Product of its manufacture is free from defects in material and workmanship when used
for the intended purpose under normal use and conditions. THIS WARRANTY IS VOID IF THE
PRODUCT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE,
IMPROPER SERVICE, FAILURE TO FOLLOW INSTRUCTIONS PROVIDED WITH THE PROD-
UCT OR OTHER CAUSES NOT ARISING OUT OF DEFECTS IN MATERIAL AND WORKMAN-
SHIP.
WARRANTY PERFORMANCE: During the above 90 day warranty period, ESCALADESPORTS
shall repair or replace with a comparable model, and Product, or component thereof, which may
prove defective under normal use and proper care, and which our examination shall disclose to
our satisfaction to be thus defective, please contact our Warranty Dept.
1-888-996-2729 / Warranty Dept.
Or Write us at:
Escalade® Sports, Inc. - P.O. Box 889, Evansville, IN 47706
Attn: Warranty Dept.
Or E-mail us at:
[email protected]
Other than shipping requirements no charge will be made for such repair or replacement of in-
warranty Products. ESCALADE SPORTS strongly recommends that the Product is insured for
value prior to mailing.
WARRANTY DISCLAIMERS: ANY IMPLIED WARRANTIES ARISING OUT OF
THIS SALE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIM-
ITED IN DURATION TO THE ABOVE 90 DAY PERIOD. ESCALADE SPORTS
SHALL NOT BE LIABLE FOR LOSS OF USE OF THE PRODUCT OR OTHER
CONSEQUENTIAL OR INCIDENTAL COSTS, EXPENSES OR DAMAGES IN-
CURRED BY THE CONSUMER OF ANY OTHER USE.
Some states do not allow the exclusion or limitation of implied warranties or consequential or
incidental damages, so the above limitations or exclusions may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights and you may also have other
rights which may vary from state to state.
90 DAY LIMITED WARRANTY