a) Do NOT use the rollator to carry heavy
objects.
b) Do NOT push the rollator when someone is
sitting on the seat.
c) If using the rollator partially folded, ensure
that all four wheels are firmly on the ground
d) Always check the brakes are working
before using.
e) Do NOT sit on rollator and push yourself
around using your feet to propel.
f) Do NOT stand on the seat.
g) Parking brake must be applied
before sitting.
h) Do NOT use on stairs or escalators.
i) Exercise caution when walking on sloped
surfaces.
j) Do NOT hang objects from the backstrap.
k) Do NOT use if the rollator is not
functioning properly.
l) The weight capacity of the rollator is
275Ib / 125kg.
m) The weight capacity of the shopping bag
is 11Ib / 5kg.
n) When storing your rollator, do not store
other items on top of your rollator.
1. For Your Safety
* Phillips screwdriver required
TheTriumph Mobility Escape rollator consists
of the following parts.
(a) Rollator frame.
(b) Brake handles (pair).
(c) Shopping Bag.
(d) Backstrap & 2 screws and nuts.
Check each part carefully for shipping
damage. Do not use the rollator if there are
signs of damage and/or parts missing.
2. Assembly
Rollator should be in the unfolded position
before beginning. While holding the ‘RED’
release lever in the open position, slide the
brake handle into the frame. Rectangular slots
on the brake handle tube should be facing
inwards.
The metal rod protruding from bottom of
brake handle tube must be inserted into the
rectangular slot in the middle of the frame. Set
the desired handle height (The line below the
number on the handle should line up with the
top edge of the frame.) , and close the ‘RED’
lever.The release lever should ‘click’ when
locked into the closed position.
Note: If brake handles are inserted with the
rectangular slots facing outwards, you will be
unable to set the handle height, as the ‘RED’
release lever will not close, and the brake will
not function.
Install the brake handles
a
b
c
d
