Trotec BZ07 User manual

TRT-BA-BZ07-TC2019-29-001-EN
BZ07
EN
OPERATING MANUAL
CLIMATE MONITORING
STATION

2 EN
climate monitoring station BZ07
Table of contents
Notes regarding the operating manual.................................2
Safety .....................................................................................2
Information about the device................................................3
Transport and storage...........................................................5
Operation ...............................................................................5
Maintenance and repair ........................................................8
Disposal .................................................................................8
Notes regarding the operating manual
Symbols
Warning of electrical voltage
This symbol indicates dangers to the life and health of
persons due to electrical voltage.
Warning
This signal word indicates a hazard with an average
risk level which, if not avoided, can result in serious
injury or death.
Caution
This signal word indicates a hazard with a low risk
level which, if not avoided, can result in minor or
moderate injury.
Note
This signal word indicates important information
(e.g. material damage), but does not indicate hazards.
Info
Information marked with this symbol helps you to carry
out your tasks quickly and safely.
Follow the manual
Information marked with this symbol indicates that the
operating manual must be observed.
You can download the current version of the operating manual
and the EU declaration of conformity via the following link:
BZ07
https://hub.trotec.com/?id=43555
Safety
Read this manual carefully before starting or using the
device. Always store the manual in the immediate vicinity
of the device or its site of use!
Warning
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/ or serious injury.
Save all warnings and instructions for future
reference.
This appliance can be used by children aged from
8years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children
without supervision.
• Do not use the device in potentially explosive rooms.
• Do not use the device in aggressive atmosphere.
• Do not immerse the device in water. Do not allow liquids to
penetrate into the device.
• The device may only be used in dry surroundings and must
not be used in the rain or at a relative humidity exceeding
the operating conditions.
• Protect the device from permanent direct sunlight.
• Do not remove any safety signs, stickers or labels from the
device. Keep all safety signs, stickers and labels in legible
condition.
• Do not open the device.
• Observe the storage and operating conditions as given in
the Technical data chapter.

EN 3
climate monitoring station BZ07
Intended use
Only use the device to measure the indoor air temperature and
humidity. Observe and comply with the technical data.
To use the device for its intended use, only use accessories and
spare parts which have been approved by Trotec.
Improper use
Do not use the device out of doors.
Do not use the device in potentially explosive areas.
Any unauthorised changes, modifications or alterations to the
device are forbidden.
Personnel qualifications
People who use this device must:
• have read and understood the operating manual, especially
the Safety chapter.
Residual risks
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Caution
Keep a sufficient distance from heat sources.
Note
To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.
Note
Do not use abrasive cleaners or solvents to clean the
device.
Information about the device
Device description
The climate monitoring station is a battery-powered measuring
device indicating the current indoor climate.
It comes with the following functional properties and equipment
features:
• Simultaneous indication of room temperature, weather
forecast, feel-good indication, temperature profile of the
previous 12hours, humidity level and time or date
• Alarm with snooze function
• Indication of recorded minimum and maximum values for
temperature and relative humidity
• Switching option between °C and °F
• Integrated stand for table installation, integrated holder for
wall mounting

4 EN
climate monitoring station BZ07
Device depiction
1
3
4
6
7
2
812 11
9
14
10
15
13
5
No. Designation
1 °C/ °F indication
2 Weather forecast (plus battery indication)
3 Feel-good indication
4 Temperature profile
5 Indication of time/ date and weekday
6 Relative humidity indication
7 Opening with RESETbutton
8MODEbutton
9UPbutton
10 DOWNbutton
11 MEMbutton
12 SNOOZEbutton
13 Stand
14 Wall holder
15 Battery compartment
Technical data
Parameter Value
Model BZ07
Article number 3510205017
Weight
(incl. batteries)
approx. 170g
Dimensions
(lengthx widthx
height)
approx. 150mmx 105mmx 23mm
Display 5" LCD (monochrome)
Power supply 2batteries of typeAAA, 1.5V
Relative humidity
Measuring range 20%RH to 99%RH
Accuracy 20% to 34%RH: ±10%RH
35% to 75%RH: ±8%RH
76% to 95%RH: ±10%RH
Resolution 1%
Air temperature
Measuring range 0°C to 50 °C or 32°F to 122 °F
Accuracy ±2°C or ±3.6 °F
Measuring range
resolution
0.1°C/°F
Ambient conditions
Operation 0°C to 50°C or 32°F to 122°F
and 90%RH (non-condensing)
Storage 0°C to 50°C or 32°F to 122°F
and 90%RH (non-condensing)
Scope of delivery
• 1x Device BZ07
• 2x 1.5V battery AAA
• 1 x Quick guide

EN 5
climate monitoring station BZ07
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
When transporting the device, ensure dry conditions and and
protect the device from external influences e.g. by using a
suitable bag.
Storage
When the device is not being used, observe the following
storage conditions:
• dry and protected from frost and heat
• protected from dust and direct sunlight
• The storage temperature is the same as the range given in
the Technical data chapter.
• Remove the batteries from the device.
Operation
Inserting the batteries
Prior to first use, insert two batteries (typeAAA, 1,5V) into the
device. To do so, please proceed as follows:
1. Open the battery compartment(15) at the rear of the
device.
2. Insert the batteries with correct polarity(+/-).
3. Close the battery compartment(15).
ðThe display will be activated and an acoustic signal is
emitted.
Switching between the indication of time, date and alarm
time
By pressing the MODEbutton(8) you can switch the
indication(5) from the time(time mode,16) to the date(date
mode,17) and then to the alarm time(alarm mode,18) by
pressing the MODEbutton(8) once more.
17
16 18
No. Designation
16 Time mode
17 Date mode
18 Alarm mode

6 EN
climate monitoring station BZ07
Setting the time format
For the indication of the time you can optionally switch between
a 12-hour and a 24-hour format. In case of the 12-hour format,
PM will be displayed beside the time indication(5) in the
afternoon. Proceed as follows to change the time format:
1. Press and hold the UPbutton(9) for approx. 2seconds.
ðThe time will be displayed in the respectively other
format.
Info
If– in case of the following settings– no button is
pressed for more than 8seconds, the system
automatically exits the setting mode and returns to the
indication of the time.
Setting the time
Please proceed as follows to set the time:
üYou have selected the time mode(16).
1. Press and hold the MODEbutton(8) for approx. 4seconds.
ðThe hour display starts flashing.
2. Use the UPbutton(9) or the DOWNbutton(10) to adjust
the hourdisplay correctly. Keep the button pressed to
adjust the value at a faster pace.
3. Once the hourdisplay has been set correctly, press the
MODEbutton(8) once more to switch to the minute
display.
ðThe minute display starts flashing.
4. Use the UPbutton(9) or the DOWNbutton(10) to adjust
the minute display correctly. Keep the button pressed to
adjust the value at a faster pace.
5. Once the minute display has been set correctly, press the
MODEbutton(8) once more to exit the mode.
Setting the date and weekday
Please proceed as follows to set the date and the weekday:
1. Switch over into the date mode(17) by pressing the
MODEbutton(8).
2. Press and hold the MODEbutton(8) again for approx.
4seconds.
ðThe date indication now turns into a flashing indication
of the year.
3. Use the UPbutton(9) or the DOWNbutton(10) to adjust
the year display correctly. Keep the button pressed to
adjust the value at a faster pace.
4. When the year has been set correctly, press the
MODEbutton(8) once more to switch to the month display.
ðThe month display(M) starts flashing.
5. Use the UPbutton(9) or the DOWNbutton(10) to adjust
the month display correctly. Keep the button pressed to
adjust the value at a faster pace.
6. Once the month display has been set correctly, press the
MODEbutton(8) once more to switch to the day display.
ðThe day display(D) starts flashing.
7. Use the UPbutton(9) or the DOWNbutton(10) to adjust
the day display correctly. Keep the button pressed to
adjust the value at a faster pace.
ðThe weekday will automatically be set to the correct
day.
8. Once the day display has been set correctly, press the
MODEbutton(8) once more to exit the mode.
ðThe set date will be indicated on the display for approx.
8seconds, then it switches back to indicate the time.
Setting the alarm time
Please proceed as follows to set the alarm time:
1. Switch over into the alarm mode(18) by pressing the
MODEbutton(8).
ðThe alarm time and the alarm icon will be displayed.
2. Press and hold the MODEbutton(8) again for approx.
4seconds.
ðThe hourdisplay and the alarm icon start flashing.
3. Use the UPbutton(9) or the DOWNbutton(10) to adjust
the hourdisplay correctly. Keep the button pressed to
adjust the value at a faster pace.
4. Once the hourdisplay has been set correctly, press the
MODEbutton(8) once more to switch to the minute
display.
ðThe minutedisplay and the alarm icon start flashing.
5. Use the UPbutton(9) or the DOWNbutton(10) to adjust
the minute display correctly. Keep the button pressed to
adjust the value at a faster pace.
6. Once the minute display has been set correctly, press the
MODEbutton(8) once more to exit the mode.
ðThe set alarm time will be indicated on the display for
approx. 8seconds, then it switches back to indicate the
time.

EN 7
climate monitoring station BZ07
De-/activating the alarm function
1. Whilst the time is displayed, briefly press the UPbutton(9).
ðThe alarm icon will be permanently indicated on the
display in between hours and minutes. The alarm
function is activated.
2. Press the UPbutton(9) again to deactivate the alarm
function.
ðThe alarm icon will no longer be displayed and the
alarm function is deactivated.
Turning off the alarm
When the acoustic alarm signal is emitted, you can turn it off by
pressing any of the buttons (other than SNOOZE(12)).
Note:
The alarm will stop automatically after 2minutes if no button is
pressed.
Snooze function
The device comes equipped with a snooze function enabling you
to turn the alarm off for the time being. The acoustic alarm
signal will be emitted once more after approx. 8minutes:
1. Press the SNOOZE button(12) when you hear the alarm.
ðThe alarm will stop and the alarm icon starts flashing.
2. After approx. 8minutes, when the acoustic alarm signal is
emitted once more, you can use the snooze function again
by pressing SNOOZE(12).
3. To deactivate the active snooze function, simply press any
other button than SNOOZE(12).
ðThe alarm icon will stop flashing and the snooze
function is deactivated.
Weather forecast
The device has an indication for the weather forecast(2)
displayed by 4symbols:
• sunny(19)
• partly cloudy(20)
• overcast(21)
• rain(22)
FORECAST
FORECAST
FORECAST
FORECAST
20
19
21 22
Info
The device is not fitted with a sensor for atmospheric
pressure. The weather forecast is based on the
changing relative humidity level. If the relative humidity
level changes by more than ±5% within one hour, the
indication will be adjusted accordingly. The symbol for
sunny weather(19) is displayed at a relative humidity
below 40%. If the humidity exceeds 80%, the
forecast will indicate the symbol for rainy weather(22).
Feel-good indication
The device comes with a feel-good indication(3) displayed by
3symbols:
• dry
• agreeable
• humid
The classification into the three categories is based on a
combination of temperature and relative humidity. The following
criteria shall be applied:
1. The symbol(dry) will be displayed at a relative humidity
level of less than 40%– regardless of the temperature.
2. If the relative humidity ranges between 40 and 70% and
the temperature between 20 and 25°C, the symbol
(agreeable) will be displayed.
3. The symbol(humid) will be displayed at a relative
humidity level of more than 70%– regardless of the
temperature.
4. If the relative humidity ranges between 40 and 70%, but
the temperature is not between 20 and 25°C, nosymbol
will be displayed.
Temperature profile
The device constantly indicates the temperature change over
the past 12hours(4) within a range of max. ±3°C.
One bar indicates an alteration by1°C or 1.8°F.
Indication of minimum and maximum values
The device saves the minimum and maximum values for
temperature and relative humidity. These values can be
displayed by pressing the MEMbutton(11):
1. Briefly press the MEMbutton(11) once to display the
maximum values.
ðThe maximum values will be displayed along with the
MAXsymbol.
2. Press the MEMbutton(11) again to display the minimum
values.
ðThe minimum values will be displayed along with the
MINsymbol.
3. Press the MEMbutton(11) once more to exit the mode.

8 EN
climate monitoring station BZ07
Switching the temperature indication between °C and °F
Briefly press the DOWNbutton(10) to switch the indicated
temperature unit from degrees Celsius to degrees Fahrenheit or
vice versa.
Resetting the system
You can reset the system to its initial configuration. To do so,
use a pointed object to press the RESETbutton(7) in the
opening.
Maintenance and repair
Battery change
A battery change is required when the battery icon is displayed
in the weather forecast indication(2) or the display itself is no
longer or only partly visible. See chapter Operation.
Cleaning
Clean the device with a soft, damp and lint-free cloth. Make
sure that no moisture enters the housing. Do not use any
sprays, solvents, alcohol-based cleaning agents or abrasive
cleaners, but only clean water to moisten the cloth.
Repair
Do not modify the device or install any spare parts. For repairs
or device testing, contact the manufacturer.
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website www.trotec24.com.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.
In the European Union, batteries and accumulators must not be
treated as domestic waste, but must be disposed of
professionally in accordance with Directive 2006/66/EC of the
European Parliament and of the Council of 6September 2006
on batteries and accumulators. Please dispose of batteries and
accumulators according to the relevant legal requirements.

Trotec GmbH & Co. KG
Grebbener Str. 7
D-52525 Heinsberg
[phone]
[phone]
[email protected]
www.trotec.com