TruCorp AirSim Bronchi User manual

1
AirSim Bronchi
User Manual
An innovative and durable solution for realistic airway
management and bronchoscopy training
The AirSim® model features the uniquely constructed AirSim® airway for
realistic feedback during airway management procedures. Visually and
anatomically correct, the nasal cavity and airway include important internal
landmarks for training in endo-tracheal and nasotracheal intubations.
Additionally, the model features anatomically correct bronchi to the 4th
generation for realistic bronchoscopy training.

2
Contents
Product specifications................................................................................................................3
Package contents.......................................................................................................................3
Recommended equipment sizes................................................................................................3
Initial set-up information...........................................................................................................4
List of procedures facilitated by the AirSim Bronchi .................................................................4
Care and maintenance...............................................................................................................4
Warranty....................................................................................................................................5

3
Product specifications
Product Code: AA51100
AirSim Bronchi weight: Approx. 3.5kg
Full shipment weight: Approx. 4kg
Full shipment dimensions: 46 x 26 x 33cm
Package contents
•1 AirSim Bronchi ready-to-use (AA51100)
•1 AirSim Bronchi carrier case (ABAG01)
•1 USB pen drive user manual
•100ml bottle of lubrication (TL001)
Recommended equipment sizes
•7.0-7.5mm ID for nasal intubation
•8.0-9.0mm ID for oral intubation
•Sizes 3-5 for LMA laryngeal masks
•Similar respective sizes for other supraglottic devices
•Size 35F-37F for endo-bronchial tubes

4
Initial set-up information
•Gently remove the model from the carrier case and remove the protective foam placed
under the manikin head
•Secure the manikin to a suitable surface by adjusting the screw on the suction cups
(surface must be non-porous to ensure sufficient suction)
•Loosen the neck locks to provide easier head movement if required. Re-tighten the neck
lock again once the head is in the desired position
•Check the volume of air in the tongue is sufficient, it can be inflated or deflated by a
syringe to adjust the difficulty during intubation if desired
•Please ensure two lung bags and one stomach bag are attached to the airway and
oesophagus respectively
•Spray generous amounts of lubrication provided with the model (TL001) on the airway
and equipment prior to use
List of procedures facilitated by the AirSim Bronchi
•Diagnostic bronchoscopy
•Lung isolation techniques using left and right endo-bronchial tubes and bronchial
blockers
•Lung suctioning techniques
•Single naso-tracheal intubation
•Bag valve mask (BVM) ventilation techniques
•Full range of supraglottic devices
•Direct laryngoscopy
•Endotracheal tube insertion
•Awake fibre optic examination
•Single lung isolation techniques
•Combi tube insertion
Care and maintenance
Store in clean, dry conditions away from heat and direct sunlight; avoid contact with metals,
solvents, oils or greases and strong detergents. When the product is not in use please store
in the black carrier case provided.
Thoroughly wash the AirSim airway in warm water. Please use warm soapy water or
something similar until all visible foreign matter and residue is removed.

5
Mild detergents or enzymatic cleaning agents may be used on the airway in accordance with
the manufacturer's instructions and at the proper dilution. The detergent must not contain
skin or mucous membrane irritants.
Please do not use any of the following when cleaning the AirSim product range
•Germicides, disinfectants, or chemical agents such as glutaraldehyde (e.g. Cidex®),
•Ethylene oxide, phenol-based cleaners or iodine-containing cleaners
In response to the recent COVID-19 pandemic, we recommend this additional step to
ensure the product is fully sanitised:
Use alcohol spray (minimum 75%) and wipe off. Repeat this for 3-4 times to ensure to kill
the virus completely. This method can be used on both the silicone skin and the latex
airway.
Warranty
TruCorp warrants this unit to be free of defects in materials and workmanship and to give
satisfactory service for a period of 1 year from the date of delivery.
This ensures that our customers receive maximum coverage on each product. If the unit
should malfunction it must be returned to the factory for evaluation. Upon examination by
TruCorp, if the unit is found to be defective it will be repaired or replaced at no charge.
However, this warranty is VOID, if; the unit shows evidence of having been tampered with
or shows evidence of having been damaged by excessive heat, the use of sharp instruments,
misapplication, misuse or other operating conditions outside of TruCorp’ s control.
Components which wear or are damaged by misuse are not warranted and will be charged
for if repair has been approved.
Please direct all warranty and repair inquiries to:
TruCorp Ltd
33 Waringstown Road
Lurgan, Co. Armagh
BT66 7HH, N. Ireland
[email protected]
Tel: [phone]

6