True TDD-2CT User manual

Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8"(millimeters rounded up to next whole number).
ROUGH-IN DATA
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS: AVAILABLE AT:
T RUE R EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
.S.A.
TM
U.S.A.
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
[phone] • FAX [phone] • [phone] • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# [phone]
TDD-2CT
TDD-2CT
*Height does not include 133/4"(350 mm) for draft arms. ▲Plug type varies by country.
†Depth does not include 1"(26 mm) for rear bumpers.
Direct Draw Beer Dispenser:
Solid Door Club Top
9/06
True’s direct draw beer dispensers
are designed with enduring quality
and value. Our commitment to using
the highest quality materials and
oversized refrigeration assures colder
product temperatures and years of
trouble free service.
Easy to reach refrigerated storage area
under slide top for chilled product or
glasses.
Oversized, factory balanced,
refrigeration system holds 33°F to 38°F
(.5°C to 3.3°C).
Exterior - heavy duty, wear resistant
laminated black vinyl front and sides.
Matching black aluminum back. All
stainless steel countertop and lid.
Interior - 300 series stainless steel floor
with 1/2" (13 mm) reinforced lip and
heavy gauge galvanized steel walls.
NSF approved for pre-packaged and
bottled product.
Adjustable, heavy duty PVC coated
shelf.
3" (77 mm) diameter stainless steel
insulated beer columns. Cold air is
directed into beer columns to reduce
foaming and maximize draft beer
profits.
Anodized aluminum glass rail provides
convenient storage for glasses on top.
Entire cabinet structure and solid
doors are foamed-in-place using
high density, CFC free, polyurethane
insulation.
Model Doors
Capacity
1/2
Barrels
Shelves
Cabinet Dimensions
(inches)
(mm)
LD
†H*HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
TDD-2CT 2 2 1 587/8
1496
271/8
689
381/2
978
1/3
1/3
115/60/1
230-240/50/1
8.5
4.2
5-15P
▲
7
2.13
335
152
R
®

STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • FAX [phone] • [phone] • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D
PLAN VIEW
KCL
TDD-2CT TFSY02E TFSY02S TFSY02P TFSY023
Direct Draw Beer Dispenser:
Solid Door Club Top
TDD-2CT
DESIGN
• True’s direct draw beer dispensers are
designed with enduring quality and
value. Our commitment to using the
highest quality materials and oversized
refrigeration assures colder product
temperatures and years of trouble free
service.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using environmentally
friendly (CFC free) 134A refrigerant.
• Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser; maintains cabinet temperatures
of 33°F to 38°F (.5°C to 3.3°C).
• Sealed, cast iron, self-lubricating
evaporator fan motors and larger fan
blades give True beer dispensers a more
efficient low velocity, high volume airflow
design. This unique design ensures faster
temperature pull down of warm product,
colder holding temperatures and faster
recovery in high use situations.
• Condensing unit accessed from behind
front grill, slides out for easy cleaning and
maintenance.
CABINET CONSTRUCTION
• Exterior - heavy duty, wear resistant
laminated black vinyl front and sides.
Matching black aluminum back. All
stainless steel counter top and lid.
• Interior - 300 series stainless steel floor
with 1/2" (13 mm) reinforced lip and heavy
gauge galvanized steel walls.
• Insulation - entire cabinet structure and
solid doors are foamed-in-place using high
density, CFC free, polyurethane insulation.
• Welded, heavy duty galvanized base rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• 3" (77 mm) diameter stainless steel
insulated beer columns. Cold air is directed
into beer columns to reduce foaming and
maximize draft beer profits.
• Anodized aluminum glass rail.
DOORS
• Wear-resistant laminated black vinyl
exterior with heavy gauge galvanized steel
liner.
• Each door fitted with 12" (305 mm) long
recessed handle that is foamed-in-place
with a sheet metal interlock to ensure
permanent attachment.
• Positive seal doors.
• Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.
• Door locks standard.
SHELVING
• One (1) adjustable, heavy duty, black, PVC
coated wire shelf 113/8"L x 211/4"D
(289 mm x 540 mm). Four (4) chrome
plated shelf clips included.
• Aluminum shelf support pilasters. Shelf is
adjustable on 1/2" (13 mm) increments.
LIGHTING
• Incandescent interior lighting.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
• Convenient
1/2" (13 mm) barbed T drain
fitting located on front of cooler.
• Designed to accommodate all types of beer
kegs.
• Listed under NSF-7 for the storage and/or
display of packaged or bottled product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord and
plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒230 - 240V / 50 Hz.
❒6" (153 mm) standard legs.
❒6" (153 mm) seismic/flanged legs.
❒21/2" (64 mm) diameter castors.
❒4" (102 mm) diameter castors.
❒Double headed draft standard.
❒Two-way tapper manifold.
❒Three-way tapper manifold.
❒Draft cap.
❒Remote cabinets (condensing unit supplied
by others; system comes standard with
404A expansion valve and requires R404A
refrigerant), consult factory technical
115/60/1
NEMA-5-15R
ELEVATION PLAN VIEW
57"
(1448 mm)
37"
(940 mm)
3"
(77 mm)
271/16"
(688 mm)
117/32"
(285 mm)
521/4"
(1328 mm)
5813/16"
(1494 mm)
151/4"
(388 mm)
4927/32"
(1267 mm)
2125/32"
(554 mm)
13"
(331 mm)
233/16"
(589 mm)
231/16"
(586 mm)
333/32"
(841 mm)
381/2"
(978 mm)
1/2"(13 mm)
Barbed T
Drain Fitting
37/8"
99 mm
123/4"
(324 mm)
15/16"
24 mm
353/4"
(909 mm)
231/16"
(585 mm)
11/2"
(39 mm)