Truvox International Valet Commercial VCU User manual

1
Userinstructions
Valet Commercial –VCU
Commercial singlemotorupright
vacuumcleaner
03-8114-0000 Iss. 310/08
CAUTION
-
READTHESEINSTRUCTIONSBEFOREUSINGTHEMACHINE

2
PartsIdentification
Packing listItemQuantityItemQuantity
Valet Commercialmachine1Toolcaddy1
Dust bag (in machine)1Dusting brush1
Handle1Crevicetool1
Vacuumhose1Upholsterytool1
Telescopicwand1Userinstructions1
Ifanyoftheabove itemsare missing please contactyoursupplierimmediately

3
Contents
Page
Partsidentification.....................................................................................Insidefront cover
1 Product information .................................................................................................4
1.1 Important safetyadvice.....................................................................................4
1.2 Guidelinesforthe operator...............................................................................4
1.3 Transporting the machine .................................................................................4
2 Preparing foruse.....................................................................................................4
2.1 Electricalconnection.........................................................................................4
2.2 Howtoassemble the vacuum............................................................................5
3 Controls...................................................................................................................5
4 Operation.................................................................................................................5
4.1 Howtochange the dustbag .............................................................................5
4.2 Handleadjustment.............................................................................................5
5 Storage....................................................................................................................5
6 Maintenance............................................................................................................6
6.1 Secondaryfilter..................................................................................................6
6.2 Replacing drivebelt...........................................................................................6
6.3 Replacing agitatorassembly..............................................................................6
7 Aftersalesservice...................................................................................................7
8 Guarantee ...............................................................................................................7
9 Waste Electronic&ElectricalEquipment ...............................................................7
10 Technicalspecification............................................................................................8
11 Accessories............................................................................................................8
12 Faultdiagnosis.......................................................................................................8
13 Declaration ofconformity.......................................................................................9

4
IMPORTANT
READ THESE INSTRUCTIONSCAREFULLYAND RETAIN FOR FUTUREREFERENCE
1 Productinformation
These commercialupright vacuumcleaners are
designed forthe collection ofdust inindoor
areas. Theyshould not beused in outdoorareas.
The following instructionscontainimportant
information about the machinesand safety
advice forthe operator.
Equipment must be operated, serviced and
maintained in accordancewith the
manufacturer’sinstructions.
Ifindoubt contactthe supplierof your
machine.
These instructionsarevalidforthe following
models.
Valet Commercial–VCU
1.1 Important SafetyAdvice
When using electricalequipment basicsafety
precautionsshould befollowed including the
following.
•Read allinstructionscarefullybefore use.
•Keep children and unauthorised persons
awayfromthe machine when in use.
•Donot leavethe machine connected to the
electricitysupplywhen not in use, always
remove the plug fromthe socket-outlet.
•Donot operate switchesortouch the mains
plugwith wet handsasthismaycause
electricshock.
•Switchoff the machine before removingthe
plug.
•When unplugging pullthe plug,notthe
supplycord.
•Donot operate the machine with a damaged
supplycordorplug, orafterthe machine
malfunctionsorisdamagedinanyway.
Contactan authorisedService Agentfor
repairoradjustment.
•The plug ofthe powersupplycordmust be
removed fromthe socket-outlet before
commencing cleaning ofthe machine or
undertaking maintenance operations.
•The powersupplycord must be regularly
inspected forsignsofdamage. Ifthe power
supplycordisdamaged,ithasto be
replaced.
•Donot use to pickup moisture orany
liquids.
•Donot usewherehazardousdust ispresent.
•Donot use inan explosiveatmosphere.
•Donot pickup oilorotherflammable
material.
•Take care when using a machine nearthe
top ofstairs toavoid overbalancing.
1.2 Guidelines forthe operator
•Onlyuse the machine on firmlevelsurfaces.
•Operators must be fullytrained in the use of
the machine inaccordancewith these
instructions, ableto performuser
maintenanceandthecorrect selection of
accessories, i.e.bags, filters, hosesetc.
•Do not leave machine running unattended
•Operators shouldbe physicallycapable to
manoeuvre, transportand operate the
machines.
•Operators shouldbe able to recognise
unusualoperation ofthe machine and report
anyproblems.
•Wearsuitable footwearto avoid slipping.
•Wearsuitable clothing to keep dryand warm.
•Where possibleimplement job rotation and
adequate rest periodsto avoid continuous
use ofthe same muscles.
•Donot smoke when using the machine.
•CAUTION – Thismachine is forindoors use
onlyand should not be used orstored
outdoors orinwetconditions.
1.3 Transporting the machine
When transporting amachine ensure that all
components,accessoriesand removable parts
are securelyfastened and that the supplycord
and plug arenottrailing.
Take extreme care when moving a machine up or
down stepsorstairs.
2 Preparing foruse
2.1 Electrical connection
Before connecting the machine to the power
supply, checkthat yoursupplyvoltage
correspondswith that marked on the rating label
on the rearofthe machine.
The powersupplycordplusanyextensionleads
should not exceed30min total. The cross-
section ofanyextension cablewiring must be at
least2,5 mm².

5
UKonly
The supplycord for230vmodelsisfitted with a
plug containing a 13 amp fuse. Should the fuse
requirereplacement it must onlybe replaced bya
13 amp fuse conforming to BS1362, and the fuse
covermust be refitted.Ifthe fuse coverislost the
plug must not be used until the correct
replacement coverisfitted.
IMPORTANT -Ifthe supplycord isdamaged,it
must onlybereplaced bya suitable cord
available fromthe manufactureroranauthorised
service agent.
WARNING– THISAPPLIANCEMUSTBE
EARTHED
2.2 Howto assemble thevacuum
Attaching thehandle
1. First removing the handle screw, theninsert
handleinto the hole ontop ofthe vacuum
cleaner.
2. Line upthesmall hole on the handlewith the
small holeon the vacuumcleanerand insert
the screwand tighten.
3. Turn the uppercord storage hookto the
upright position and wind the powercord
around the cord storage hookswhen storing
the vacuumcleaner(Fig. 1).
Fig 1.
Attaching thevacuum hose
1. Push hoseconnectorinto rearofvacuum
body.
2. Push hosecuff into read ofbrush head.
Attaching thetool caddy
1. Position caddyon front of handle and tighten
bolt.
2 Pushtoolsonto caddy
3 Controls
1. To turn the vacuumon, push theswitch
located on the dust compartment to the (I)
position.
2. To turn the vacuumoff, push theswitch
located on the dust compartment on the (0)
position.
4 Operation
4.1 Howto Change the DustBag
Always operatethe vacuum cleanerwith a
dustbaginstalled.
1. Unplug the vacuumcleaner. Remove the
used bag fromthe bag holder(Fig.1).
2. Attachthe newdust bag onto the bag holder
(Fig. 2). To ensurepropercleaning and
extended motorlife, makesure the
secondarybag supportisalwaysin place.
3. Spread out the end ofthe newdustbag(Fig.
3).
4. Reinsertthe tab on the endofthe dust cover
intothegrooveon the dustcompartment
housing. Press itinto placeand fasten the
dust covertightly(Fig. 4).

6
4.2 Handle adjustment
The handleon thisvacuumcleanercan be set to
one ofthree positions–upright, middle, orlow.
To release the handle, stepon the pedalat the
left rearcornerofthe vacuumcleaner
1. Middle position –fornormalcleaning
2. Upright position – forwhen cleaningtoolsare
used orforstorage. Handlelocksin this
position.
3. Lowposition – forcleaningunderfurniture.
4.3 Using the hose and tools
When using the hose and toolsplease ensure the
handleislocked into the upright position and that
the brushhead istilted upwardsto prevent the
brush running in placeon the carpet.
4.3 Howto Release thePowerCord
1. The uppercord storage hookhasa quick-
releaseaction. To release the cord, rotate
the hookdownward and the cordwilldropoff
the handle forimmediate use.
2. Return the hookto the upright position before
attempting to rewindthecord.
5 Storage
•Afteruse checkthat the bag. Iffull, replace
the bag.
•Wind supplycordaround the cord storage
hookensuring that the plugisnottrailing on
the floor.
•Storethe machineina dryindoorarea only.
6 Maintenance
WARNING-Beforeundertaking maintenance
operations oradjustments switchoff machine
and unplug from the electricitysupply.
The machine requiresminimummaintenance
apart fromthe following checks bythe operator.
•Supplycord – Regularlyinspect sheath,
plug and cordanchorage fordamage or
loose connection.
•Body of the machine – Clean witha damp
cloth.
6.1 SecondaryFilter
YourTruvoxvacuumcleanerisequippedwith a
secondaryfilterto capture fine dust particlesand
protect the motorfromdirt. Accumulated dirt in
the dust compartment willbe collectedon this
filterand mayrestrict motorperformance. It is
important to change the secondaryfilterregularly
— approximatelyeverythird filterbag change, or
asneeded.
ToChange SecondaryFilter:
1. Unplug the vacuumcleaner. Remove filter
bag.
2. Remove bag support (Fig. 1).
3. Remove secondaryfilterand replacewith a
newfilter(Fig. 2).
4. Reinsertbag support and newfilterbag.
NOTE: Secondaryfilters cannot be washed.
6.2 Changing thebelt
Remove the Bottom Plate.
1. Placevacuumcleanerin the low position by
using the handle releasepedal. Then, turn
the vacuumcleanerover, exposing the
underside.
2. Remove the screwsholding thelowerplate in
place.
3. Remove the bottomplate.
Replacing thebelt.
1. Turn the unit overandremovethelower
plate asdescribedinthepreceding section.
2. Remove the agitatorholder(Fig. 1). Take out
the agitatorassemblyand remove belt guard
fromthe agitatorpulleyandthe motordrive
shaft (Fig. 2 &3).
3. Loopthenew belt around the agitatorpulley
and the motordrive shaft.
4. Reinsertthe agitatorassemblybackinto
housing (Fig 4). Turn the agitatorassembly
byhand, making sure the beltisnottwisted
and allrotating partsmove smoothly(Fig. 5).
5. Reinsertthe agitatorholder. Be sure that the
agitatorholderisinplace before fastening
the lowerplate.
6. Hookthe front end oflowerplate to the two
ribsat the front end ofthe housing. Press the
lowerplate into place and replace screwsto
hold it.
NOTE: To ensure maximumcleaning efficiency,
the beltshouldbe checked regularlyto be sureit
isingood condition. Checkto see ifthe beltis
stretched, cracked, orifexcessive slipping is
occurring. Replaceit ifneeded.
Fig1 Fig2

7
6.3 Replacing theagitatorassembly
Brushesshouldbe replacedwhen theyareworn
orwhenthebristle doesnot toucha card that is
held across the nozzle. You should replace all
fourbrushesat the same time in orderto
maintaingood cleaning efficiency.
Remove E-clip first fromagitatorshaft byusing
screwdriver. Thenremovethe end cap at right
end byholding the agitatorassembly.Pull out the
agitatorshaft fromthe left end.
NOTE: Take care not to deformthe agitatorshaft.
Nowthe brushescan be removed easily.After
inserting the newbrushes,re-installthe agitator
pulleyand agitatorholder,making sure theyare
completelyand firmlyinserted. Reinstallother
partsfollowing the stepsinreverse.
Be surethe endcapsand filters areinplace
before fitting the E-clipback into place. Reinstall
the agitatorassemblyasdescribed in preceding
section.
6.4 Cleaning the nozzle hose
The nozzle hose, located on thebackofthe
vacuumcleaner, carriesthe dirt fromthe nozzle
to the filterbag.The hosealso functionsasthe
attachment cleaning hose.
Ifthe hose should become clogged:
1. Pullout and turn the lidofthe hose
attachment opening. Remove the clog or
blockage (Fig.1).
2. Ifthe above step isnot enough, removehose
cufffromthe nozzleinlet (Fig. 2). Turn the
unitoverand unscrewandremove the
bottomplate (see "How To Remove Bottom
Plate."). Checknozzleinlet tube for
obstructions. Cleartube and reinstallthe
bottomplate.
IMPORTANT -Should the machine failto
operate contact TruvoxCustomerService
Department forrapidattention.
7Aftersales service
Truvoxmachinesarehigh qualitymachinesthat
have been testedforsafetybyauthorised
technicians. It isalwaysapparent thatafterlonger
working periods, electricaland mechanical
componentswillshow signsofwearand tearor
ageing.
Tomaintainoperationalsafetyandreliabilitythe
following serviceintervalhasbeen defined: Every
yearorafter250hours.
Underextreme orspecialised conditionsand/or
insufficient maintenance, shortermaintenance
intervalsare necessary. Use onlyoriginalTruvox
spare parts. Use of otherspare parts will
invalidate all warrantyandliabilityclaims.
Shouldyou require aftersalesserviceplease
contact the supplierfromwhomyou purchased
the machine, who will arrange service. Repairs
and servicing ofTruvoxproductsshould onlybe
performed bytrained staff. Improperrepairs can
cause considerabledangersto the user.
Enquireabout the Truvoxlowcost and efficient
MaintenanceContract.
8 Guarantee
Yourproductisguaranteedforone yearfromthe
date oforiginalpurchase, orhire purchase,
against defectsin materialsorworkmanship
during manufacture. Within the guaranteeperiod
we undertake at ourdiscretion,to repairor
replace free ofcharge tothe purchaser,anypart
found to be defective, subject to thefollowing
conditions.
CONDITIONS
1. Claimsmade underthe termsofthe
guaranteemust be supported bythe original
invoice/billofsaleissued atthe time ofsale,
orthe machine SerialNo.
2. Forclaimsunderthisguarantee contact the
supplierfromwhomyou purchased the
productwho willarrange the appropriate
action. Do not initiallyreturn theproduct as
thiscould resultin transitdamage.
3. NeitherTruvoxnoritsdistributorshallbe
liable foranyincidentalorconsequentialloss.
4. Thisguarantee isgovernedbythe lawsof
England.
5. Thisguarantee doesnot coveranyofthe
following:
-Periodicmaintenance, and repairor
replacement ofpartsdue to normalwearand
tear.
-Damage caused byaccident, misuse or
neglect, orthe fitting ofotherthangenuine
Truvoxparts.
-Defectsin otherthan genuine Truvoxparts,
orrepairs, modificationsoradjustments
performed byotherthana Truvoxservice
engineerorauthorised service agent.
-Costsand risksoftransport relatingdirectly
orindirectlyto the guarantee ofthisproduct.
-Consumable itemssuch as, brushes, drive
discs, filters andvacuumskirts.
Thisguarantee doesnot affectyourstatutory
rights, oryourrightsagainst the supplierarising
fromtheirsalesorpurchase contract.

8
TruvoxInternationalLimited policyisone of
continualproduct development and we reserve
the right to alterspecificationswithout priornotice
9 WasteElectrical & Electronic Equipment
Do not dispose ofthisdevicewith unsorted
waste. Improperdisposalmaybe harmfulto the
environment and human health.
Please referto yourlocalwaste authorityfor
information on return and collection systemsin
yourarea.

9
10 Technical Specification
Mode Valet Commercial
RefNo VCU
TankmaterialABS
Voltage a.c.V230
FrequencyHz50 / 60
No. ofmotors 1
MotorratingW1200
Capacity– dryL3.6
Construction class II
Protection IPIP20
Airflowl/sec42.5
kPa15
Vacuum mm/wg
112
Cable length m15
Size (lxwxh)cm35x37x114
Weight kg7.6
NoiseLevel(see
note 1) dB(A)
<80
1 – The sound pressurelevelundernormaloperating conditionsisless than 80 dB(A).
11 Accessories
ItemPartNo.Usage
Dust bagsAE2234000Packof10 dust bagsforValetCommercial
ToolsTU1AU00005 Toolkit (round brush,crevice tool, upholstery
tool)and bracket
FilterTU1AU00001 Secondaryfilter(packof5)
IMPORTANT: Genuineaccessoriesare onlyavailablefromauthorised ServiceAgentsorTruvox
CustomerServiceDept.
12 Faultdiagnosis
The following simple checks maybe performed bythe operator.
Trouble Reason Remedy
Machine not working. Lackofvoltage/electrical
supply. Checkfuse *, supplycord, plug and socket outlet.
Loss ofsuction Bag full.
Blocked hoseorwand.
Motornot working
Replace bag
Remove obstruction
Contact supplier
MotorisnotrunningBroken switch
Defectivepowercord
Defectivemotor
Contact supplier
Contact supplier
Contact supplier
*Ifthe fuse blowsseveraltimes, the machine should be checked byan authorisedServiceAgent.

10
13 Declaration of conformity
EC Declaration of conformity
We, TruvoxInternationalLtd.
OfThird Avenue
MillbrookTrading Estate
Southampton SO15 0LE
England
declarethatthe machinery
Make:Commercialupright single motorvacuumcleaners
Type:Valet Commercial
Model:VCU
YearofConstruction:from2006
hasbeen manufactured using the following transposed harmonised European Standardsand
technicalspecifications.
BS EN61000-6-3,BSEN 60335-1 and BSEN 60335-2-69, and isin conformitywith:
the MachineryDirective 98/37/EC and subsequent amendments,
the LowVoltage Directive73/23/EEC and subsequent amendments,
and the EMCDirective 89/336/EECandsubsequent amendments.
Signed in : SOUTHAMPTON, England
on the 1st dayofDecember2006
Signature :
Name : MalcolmEneas
Position: NewProduct Development Manager

11

12
TruvoxInternationalLimited
Third Avenue, Millbrook, Southampton, Hampshire SO15 0LE,England
Tel: [phone]Fax: [phone]
e-mail: [e-mail]: www.truvox.com