5
Table of contents
1 General ........................................ 7
1.1 Purpose....................................................... 7
.............................. 7
1.2.1 General ..................................................................7
1.2.2 Manufacturing address........................................7
1.2.3 Labelling................................................................8
1.2.4 Declaration of conformity....................................8
.............8
1.2.6 Energy consumption............................................9
1.2.7 Intended usage .....................................................9
1.2.8 Technical data sheet ............................................10
2 Safety............................................. 11
2.1 Labelling of notices in the operating
manual ........................................................ 11
... 11
2.3 Dangers in the case of non-observance
of the safety notices .................................. 12
2.4 Safety-oriented work ................................. 12
2.5 Safety notes for the operator/user ........... 12
2.6 Safety notes for carrying out service,
inspection and installation work .............. 15
2.7 Unauthorised conversion and
spare parts manufacturing........................ 15
2.8 Modes of operation that are
not permitted .............................................. 15
2.9 Warning images on the
machine according to ISO 11684.............. 16
3 Gigant sweeping machine ......... 17
3.1 Description of the product and
accessories ................................................ 17
3.2 Storage........................................................ 19
3.3 Attachment ................................................. 20
3.3.1 Initial attachment..................................................21
3.3.2 Quick change receptacle .....................................21
3.3.3 3-point linkage ......................................................22
3.4 Operation .................................................... 23
3.4.1 Transport trips ......................................................23
3.4.2 Start-up..................................................................23
3.4.3 Side broom adjustment / readjustment..............24
3.4.4 Rpm adjustment ...................................................25
3.4.5 Emptying the dirt collection vessel ....................26
3.4.6 Open sweeping.....................................................26
3.4.7 Side adjustment for open sweeping usage .......27
...............28
3.5 Deinstallation ............................................. 29
3.5.1 Quick change receptacle .....................................30
3.5.2 Three-point mount................................................30
4 Service and maintenance .......... 31
4.1 General........................................................ 31
4.2 Replace brush rings .................................. 32
4.2.1 Brush shaft, internal motor .................................32
4.3 Replacing the plate broom........................ 34
4.5 Water spraying device............................... 35
.... 37
4.8 Hydraulic circuit diagrams........................ 38
4.8.1 Hydraulic circuit diagram ....................................38
4.8.2 Hydraulic circuit diagram ....................................40
