TurboChef 2020 User manual

TM
Owner’s Manual
    h    
© 2008-2012 TurboChef Technologies, Inc.

For further information, call
800.90TURBO
or
+1 214.379.6000

The information contained in this manual is important for the proper installation, use, maintenance,
and repair of this oven. Follow these procedures and instructions to help ensure satisfactory baking
results and years of trouble-free service.
Errors – descriptive, typographic, or pictorial – are subject to correction. Specifications are subject to
change without notice.
Please carefully read this manual and retain it for future reference.

Table of Contents
Safety Information
Important Safety Information - Please Read First i
General Safety Information i
Reducing Fire Risk ii
Preventing Oven Damage ii
Grounding Instructions ii
Power Cord Replacement ii
Specifications and Installation
HhC 2020 Dimensions 1
HhC 2020 Electrical Specifications 1
HhC 2620 Dimensions 2
HhC 2620 Electrical Specifications 2
Packaging 3
Certifications 3
Construction 3
Installation Instructions 3
Delivery and Initial Inspection 3
Lifting the Oven 3
Oven Location and Placement 3
Installation Near Open Heat Source 4
Ventilation Requirements 4
Cleaning
Daily Cleaning Instructions 5
Weekly Cleaning Instructions 6-8
Standard Oven Operation
Oven Controls 9
Cooking 10
Editing a Cooking Profile 12
Changing a Cooking Profile Name 12
Adjusting the Belt Speed 13
Adjusting the Temperature 13
Adjusting the Top and Bottom Air 13

Oven Modes
Config Mode 14
Smart Card Screen (Loading a Menu) 14
Accessing the Fault Count Screen 14
Accessing the Setup Mode 14
Setup Mode 14
Changing the Display Temperature 15
Changing the Belt Direction 15
Edit Options Screen 15
Changing the Speaker Volume 15
Info Screen 16
Updating the Firmware 16
Troubleshooting 17
Replaceable Parts 19
North America Limited Warranty 20
International Limited Warranty 23

i
SAFETY INFORMATION
Important Safety Information – Please Read First
Improper installation, adjustment, alteration, service, or maintenance of this equipment can cause property
damage, injury, or death. Thoroughly read the installation, operating, and maintenance instructions
before installing or servicing this equipment. Strictly adhere to the following safety information to reduce
the risk of:
oDamage to the oven
oDamage to property near the oven
oPersonal injury
oBurns
oFire
oElectric shock
General Safety Information
oUse this appliance only for its intended uses as described in this manual.
oOnly qualified service personnel should service this appliance. Contact the nearest authorized service
facility for examination, repair, or adjustment.
oAlways ensure the oven is disconnected from the power supply before servicing, repairing, or adjusting
any components or parts.
oThis appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.

DO NOT place the cord near heated surfaces.

DO NOT store or use flammable vapors or liquids (e.g., gasoline) in the vicinity of this appliance.

DO NOT allow children to use this appliance. Children should be supervised to ensure that they do
not play with the appliance

DO NOT place corrosive chemicals or vapors in this appliance. It is not designed for industrial or
laboratory use.

DO NOT operate this appliance if it:
Has a damaged cord or plug
Is not working properly
Has been damaged or dropped

DO NOT cover or block any openings on this appliance.

DO NOT store this appliance outdoors.

DO NOT use this appliance near water.

DO NOT immerse this appliance or any of its components (e.g., cord, plug, etc.) in water.

DO NOT let the cord hang over the edge of a table or counter.

ii SAFETY INFORMATION
Reducing Fire Risk
If materials inside the oven ignite or if smoke is observed,
1. Turn off the oven.
2. Disconnect the power cord or shut off power at the fuse/circuit breaker panel.
o
Carefully attend the oven if paper, plastic, or other combustible materials are placed inside the oven
to facilitate cooking.

DO NOT leave items in the cook cavity when the oven is not in use.

DO NOT cook items wrapped in cling wrap or plastic film.

DO NOT overcook food.
Preventing Oven Damage
o
When servicing this appliance, do not tear insulation to get to components. Rather, find the edge of
the insulation and remove the tape that holds it in place.
oClean the oven daily.
oClean the oven only with TurboChef Oven Cleaner.

DO NOT clean with a water jet.

DO NOT allow cleaning solution or water to remain in the cook cavity longer than necessary.
Grounding Instructions
WARNING: Improper grounding increases the risk of electric shock.
This appliance must be grounded. The cord is equipped with a grounding wire and plug, which in the
event of an electrical short circuit, reduce the risk of electric shock by providing an escape wire for the
electric current. The wire must be plugged into an outlet that is properly installed and grounded.
Consult a qualified electrician or serviceman to determine whether or not the appliance is properly
grounded.

DO NOT use an extension cord. If the power supply cord is too short, request a qualified electrician
or serviceman to install an outlet near the appliance.
Power Cord Replacement
To avoid potential hazards, only the manufacturer, its service agent, or a similarly-qualified person
should replace a damaged power cord.

1
SPECIFICATION AND INSTALLATION
HhC 2020 Dimensions
Exterior
Height 13.0” (330 mm)
--with legs 17.0” (432 mm)
Width 48.3” (1227 mm)
Depth 35.7” (907 mm)
Conveyor
Length 48.3” (1227 mm)
Width (Single) 20.0” (508 mm)
Width (50/50) 9.5” / 9.5” (241 mm / 241 mm)
Width (70/30) 15” / 4” (381 mm / 102 mm)
Electrical Specifications
North America
3 Phase
208/240 VAC
50/60 Hz
40 amp current draw
Max Input: 14.4 kW
4-wire supply
NEMA 15-50P plug (4-pin IEC60309 available by
special order)
50-amp max circuit breaker protection
Europe/Asia (220-240 VAC)
3 Phase
220-240 VAC
50/60 Hz
40 amp current draw
Max Input: 14.4 kW
4-wire supply
IEC60309 4-pin plug
64-amp max circuit breaker protection
Europe/Asia (380-415 VAC)
3 Phase
380-415 VAC
50/60 Hz
20 amp current draw
Max Input: 14.4 kW
5-wire supply
IEC60309 5-pin plug
32-amp max circuit breaker protection
35.7” (907 mm)
48.3” (1227 mm)
8.5”
(216 mm)
13.0”
(330 mm)
17.0”
(432 mm)
4.0” (102 mm)
60.1” (1527 mm) with extensions
43.0”
(1092 mm)
30.0”
(762 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
8.5”
(216 mm)
13.0”
(330 mm)
21.5”
(546 mm)
8.5”
(216 mm)
13.0”
(330 mm)
34.5”
(876 mm)
13.0”
(330 mm)
35.7” (907 mm)
48.3” (1227 mm)
8.5”
(216 mm)
13.0”
(330 mm)
17.0”
(432 mm)
4.0” (102 mm)
60.1” (1527 mm) with extensions
43.0”
(1092 mm)
30.0”
(762 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
8.5”
(216 mm)
13.0”
(330 mm)
21.5”
(546 mm)
8.5”
(216 mm)
13.0”
(330 mm)
34.5”
(876 mm)
13.0”
(330 mm)
35.7” (907 mm)
48.3” (1227 mm)
8.5”
(216 mm)
13.0”
(330 mm)
17.0”
(432 mm)
4.0” (102 mm)
60.1” (1527 mm) with extensions
43.0”
(1092 mm)
30.0”
(762 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
8.5”
(216 mm)
13.0”
(330 mm)
21.5”
(546 mm)
8.5”
(216 mm)
13.0”
(330 mm)
34.5”
(876 mm)
13.0”
(330 mm)
35.7” (907 mm)
48.3” (1227 mm)
8.5”
(216 mm)
13.0”
(330 mm)
17.0”
(432 mm)
4.0” (102 mm)
60.1” (1527 mm) with extensions
43.0”
(1092 mm)
30.0”
(762 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
8.5”
(216 mm)
13.0”
(330 mm)
21.5”
(546 mm)
8.5”
(216 mm)
13.0”
(330 mm)
34.5”
(876 mm)
13.0”
(330 mm)
35.7” (907 mm)
48.3” (1227 mm)
8.5”
(216 mm)
13.0”
(330 mm)
17.0”
(432 mm)
4.0” (102 mm)
60.1” (1527 mm) with extensions
43.0”
(1092 mm)
30.0”
(762 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
8.5”
(216 mm)
13.0”
(330 mm)
21.5”
(546 mm)
8.5”
(216 mm)
13.0”
(330 mm)
34.5”
(876 mm)
13.0”
(330 mm)
Figure 1: HhC 2020 Oven Dimensions - Side
Figure 2: HhC 2020 Oven Dimensions - Top
Figure 3: HhC 2020 Oven Dimensions - Front (Single)
Figure 4: HhC 2020 Oven Dimensions - Front (Double)
Figure 5: HhC 2020 Oven Dimensions - Front (Triple)

2SPECIFICATION AND INSTALLATION
6.0”
(152 mm)
6.0”
(152 mm)
48.3” (1227 mm)
41.7”
(1059 mm)
24.0” (610 mm)
4.0”
(102 mm)
8.5”
(216 mm)
17.0”
(432 mm)
41.7” (1059 mm)
4.0”
(112 mm)
HhC 2620 Dimensions
Exterior
Height 13.0” (330 mm)
--with legs 17.0” (432 mm)
Width 48.3” (1227 mm)
Depth 41.7” (1059 mm)
Conveyor
Length 48.3” (1227 mm)
Width (Single) 20.0” (508 mm)
Width (50/50) 9.5” / 9.5” (241 mm / 241 mm)
Width (70/30) 15” / 4” (381 mm / 102 mm)
Electrical Specifications
North America
3 Phase
208/240 VAC
50/60 Hz
40 amp current draw
Max Input: 14.4 kW
4-wire supply
NEMA 15-50P plug (4-pin IEC60309 available by
special order)
50-amp max circuit breaker protection
Europe/Asia (220-240 VAC)
3 Phase
220-240 VAC
50/60 Hz
40 amp current draw
Max Input: 14.4 kW
4-wire supply
IEC60309 4-pin plug
64-amp max circuit breaker protection
Europe/Asia (380-415 VAC)
3 Phase
380-415 VAC
50/60 Hz
20 amp current draw
Max Input: 14.4 kW
5-wire supply
IEC60309 5-pin plug
32-amp max circuit breaker protection
35.7” (907 mm)
48.3” (1227 mm)
8.5”
(216 mm)
13.0”
(330 mm)
17.0”
(432 mm)
4.0” (102 mm)
60.1” (1527 mm) with extensions
43.0”
(1092 mm)
30.0”
(762 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
8.5”
(216 mm)
13.0”
(330 mm)
21.5”
(546 mm)
8.5”
(216 mm)
13.0”
(330 mm)
34.5”
(876 mm)
13.0”
(330 mm)
35.7” (907 mm)
48.3” (1227 mm)
8.5”
(216 mm)
13.0”
(330 mm)
17.0”
(432 mm)
4.0” (102 mm)
60.1” (1527 mm) with extensions
43.0”
(1092 mm)
30.0”
(762 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
8.5”
(216 mm)
13.0”
(330 mm)
21.5”
(546 mm)
8.5”
(216 mm)
13.0”
(330 mm)
34.5”
(876 mm)
13.0”
(330 mm)
35.7” (907 mm)
48.3” (1227 mm)
8.5”
(216 mm)
13.0”
(330 mm)
17.0”
(432 mm)
4.0” (102 mm)
60.1” (1527 mm) with extensions
43.0”
(1092 mm)
30.0”
(762 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
13.0”
(330 mm)
8.5”
(216 mm)
13.0”
(330 mm)
21.5”
(546 mm)
8.5”
(216 mm)
13.0”
(330 mm)
34.5”
(876 mm)
13.0”
(330 mm)
Figure 6: HhC 2620 Oven Dimensions - Side
Figure 7: HhC 2620 Oven Dimensions - Top
Figure 8: HhC 2620 Oven Dimensions - Front (Single)
Figure 9: HhC 2620 Oven Dimensions - Front (Double)
Figure 10: HhC 2620 Oven Dimensions - Front (Triple)
6.0”
(152 mm)
6.0”
(152 mm)
48.3” (1227 mm)
41.7”
(1059 mm)
24.0” (610 mm)
4.0”
(102 mm)
8.5”
(216 mm)
17.0”
(432 mm)
41.7” (1059 mm)
4.0”
(112 mm)