TV One 1T-PCDVI-PCDVI User manual

Instruction Manual
1T-PCDVI-PCDVI
PC/HD/DVI Scaler

Table of Contents
1.0 Introduction 2
2.0 Specifications 3
3.0 Checking Package Contents 5
4.0 Connecting The Hardware 5
5.0 Operating The Unit 7
6.0 Troubleshooting 9
7.0 Limited Warranty 10
8.0 Regulatory Compliance 10
9.0 Contact Information 11

2
1.0 INTRODUCTION
The 1T-PCDVI-PCDVI Video Scaler is a high bandwidth, professional Cross Converter
for Analog and DVI formats. The unit has separate Analog and DVI inputs and outputs
via HD-15 and DVI-I connectors respectively. It accommodates resolutions up to
WUXGA and 1080p and allows conversion between them. The unit also accepts
480i/576i YUV interlaced analog component video, such as from a DVD Player for up-
conversion. Our professional video conversion products have been serving the industry
for over twenty years. TV One offers a full line of high quality Seamless Switchers,
Video Scalers, Up/Down/Cross Converters, Analog-Digital Converters (SD/HD-SDI,
HDMI, DVI), Format Converters, Standards Converters, TBC/Frame Synchronizers,
Matrix Routing Switchers, Signal Distribution Amplifiers and Cat.5 Transmission
Systems.
1.1 Liability Statement
Every effort has been made to ensure that this product is free of errors. TV One cannot
be held liable for the use of this hardware or any direct or indirect consequential
damages arising from its use. It is the responsibility of the user of the hardware to check
that it is suitable for his/her requirements and that it is installed correctly. All rights
reserved. No parts of this manual may be reproduced or transmitted by any form or
means electronic or mechanical, including photocopying, recording or by any
information storage or retrieval system without the written consent of the publisher.
TV One reserves the right to revise any of its hardware and software following its policy
to modify and/or improve its products where necessary or desirable. This statement
does not affect the legal rights of the user in any way.
All third party trademarks and copyrights are recognised. The TV One logo, TV One-
task and CORIO are the registered Trademarks of TV One. All other trademarks are the
property of their respective holders.
1.2 Features
The 1T-PCDVI-PCDVI has many features that enable it to perform in a superior
manner. Among those features you will find:
DVI and Analog Inputs and Outputs
Input and OutputResolutions up to 1080p and WUXGA@60Hz
YUV and YPbPr Component plus RGBHV Input Formats
RGBHV Output Format
DVI Inputs and Outputs are fully HDCP Compliant
3-D Motion Adaptive De-Interlace and 3-D Noise Reduction
3:2 Pull-Down w/2:2 Pull-Down Recovery

3
2.0 SPECIFICATIONS
Video Inputs
DVI-D 1x via DVI-I Connector
Analog RGBHV 1x via HD-15 Connector
Analog Component (YPbPr/YUV) 1x via 3x RCA Connectors
Video Outputs
DVI-D 1x via DVI-I Connector
Analog (RGBHV) 1x via HD-15 Connector
Formats Supported
Input RGBHV, YPbPr, YUV
Output RGBHV
Maximum I/O Resolution WUXGA@60Hz and 1080p
Scaling Engine
Number of Engines Two (2)
Phased Lock Loops 8-bit triple ADC
De-Interlace 3D Motion Adaptive
Noise Reduction 3D
Pull-Down 3:2 + 2:2 Recovery
Bandwidth 165 Mbs Digital, 100MHz Analog
HDCP Support
DVI I/O Fully Compliant
Mechanical
Size (H-W-D) 25.5x180x125mm (1x7x4.9”)
Weight (Net) 480 g (1.06 lbs)
Warranty
Limited Warranty 3 Years Parts and Labor
Environmental
Operating Temperature 0to +50C (+32to +122F)
Operating Humidity 10% to 90%, Non-condensing
Storage Temperature -10to +60C (+14to +140F)
Storage Humidity 10% to 90%, Non-condensing
Power Requirement
External Power Supply 5VDC@2A
Regulatory Approvals
Converter Unit FCC, CE, RoHS
Power Supply UL, CUL, CE, PSE, GS, RoHS
Accessories Included
1x AC Power Adapter US, UK or Euro Type
1x Operations Manual
1x IR Remote Control

4
2.1Supported Input Formats and Resolutions
The 1T-PCDVI-PCDVI accepts DVI and Analog PC plus Analog Component inputs via
separate connectors. The resolutions and formats processed for these inputs are as
follows:
Resolution V. Rate/Hz Scan Format / Connector
480i 720x480 60 (NTSC) Interlaced
576i 720x576 50 (PAL) Interlaced YUV via 3x RCA
480p 720x480 60 Progressive
576p 720x576 50 Progressive
720p 1280x720 50,60 Progressive
1080p 1920x1080 50,60 Progressive
RGBHV via HD-15 & DVI
YPbPr via 3x RCA
1080i 1920x1080 50,60 Interlaced RGBHV via DVI
YPbPr via 3x RCAI
VGA 640x480 60,72,75,85 Progressive
SVGA 800x600 56,60,72,75,85 Progressive
XGA 1024x768 60,70,75,85 Progressive
SXGA 1280x1024 60,75,85 Progressive
UXGA 1600x1200 60 Progressive
WXGA 1280x800 60 Progressive
WSXGA 1680x1050 60 Progressive
WUXGA 1920x1200 60 Progressive
RGBHV via HD15 & DVI
2.2 Supported Output Formats and Resolutions
The 1T-PCDVI-PCDVI can provide a large number of output resolutions in the RGBHV
format as shown in the following table:
Resolution V. Rate/Hz Scan Format / Connector
480p 720x480 60 Progressive
576p 720x576 50 Progressive
720p 1280x720 50,60 Progressive
1080p 1920x1080 50,60 Progressive
1080i 1920x1080 50,60 Interlaced
VGA 640x480 60 Progressive
SVGA 800x600 60 Progressive
XGA 1024x768 60 Progressive
SXGA 1280x1024 60 Progressive
SXGA+ 1400x1050 60 Progressive
UXGA 1600x1200 60 Progressive
WXGA 1280x800 60 Progressive
WXGA+ 1440x900 60 Progressive
WSXGA 1680x1050 60 Progressive
WUXGA 1920x1200 60 Progressive
RGBHV via HD15 & DVI

5
3.0 CHECKING PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make certain the
following items are contained in the shipping carton:
1x 1T-PCDVI-PCDVI Scaler
1x Power Supply
1x IR Remote Control
1x Operations Manual
Note: Please retain the original packing material should the need ever arise to return
the unit. If you find any items are missing, contact your reseller or TV One immediately.
Have the Model Number, Serial Number and Invoice available for reference when you
call.
4.0 CONNECTING THE HARDWARE
Referring to the drawing below, connect the proper cable (3x RCA to 3x RCA for YPbPr
component input, HD-15 to HD-15 for PC input or DVI to DVI for DVI input) and then
connect the AC power adaptor.
Next, study the panel drawings and connector/control descriptions below and become
familiar with the control actions, connector functions and power requirements.
1Component (YPbPr) inputs – used with HDTV analog source device
2Infrared Sensor – For use with Remote Control
3Status LEDs – Show which type source is in use
4Menu/Enter – Brings up OSD menu and acts as Enter Key for selections
5See Note Below
6Power On/Off
NOTE: Item 5 is multipurpose: Pressing the “+” key (without first pressing the
Menu/Enter key) will step the 1T-PCDVI-PCDVI through the various possible input
sources (YPbPr, PC or DVI) in a sequential manner. Next, pressing the “-“ key (without
first pressing the Menu/Enter key) causes the 1T-PCDVI-PCDVI to execute an
automatic alignment of the PC signal components such as picture centering, color, etc.
Lastly, if you press the Menu/Enter key (which causes selection of the OSD or “On
1
2
3
4
5
6

6
Screen Display”menu mode), the “+” and “-“keys can be used to navigate up and down
through the various menu parameters. Once the desired parameter is highlighted, the
Menu/Enter key is pressed to select the highlighted item. The “+” and/or “-“keys are then
used to effect the actual change or selection.
1Power Adaptor Jack – Connect the provided AC Adaptor here1
2DVI Output – Connect to DVI capable device2
3PC Out (RGB). Connect to PC Monitor or RGB capable Projector
4DVI In – Connect to output from DVI capable device3
5PC In – Connect to a PC’s VGA (Monitor) out
Connect the appropriate cables to the desired connector. Use only the highest quality
cables.
The 1T-PCDVI-PCDVI is very capable and will automatically identify, accept and scale a
host of input types and resolutions (including analog and PC type signals). The output
however will be either DVI with a resolution of 480i to 1080p or RGB with resolutions
from VGA to WUXGA. You must use a display or other destination device that is either
DVI or RGB capable in order to use the output from this product. Since you can specify
the output resolution, you’ll need to know the highest resolution your destination device
is capable of handling and set the 1T-PCDVI-PCDVI’s output resolution accordingly.
Note 1: TV One utilizes a special “Twist-to-lock” connector to prevent the power cable
coming loose. Insert the connector into the socket just as you would with other
manufacturer’s power adaptors but once securely inserted, gently twist the connector 90
degrees to the right or left which will lock it in place.
Notes 2&3: To realize maximum quality and performance, use only the highest quality
cables with the 1T-PCDVI-PCDVI. Low quality cables will cause degradation of the
signal quality and limit the distance between both the source and destination devices
and the 1T-PCDVI-PCDVI.
1 2 3 4 5

7
5.0 OPERATING THE UNIT
The 1T-PCDVI-PCDVI can be operated from either the front panel controls or via the
included Infrared Remote Control. Since Infrared is the control method used most often
by the majority of users, please take the time to familiarize yourself with the location and
function of the various control buttons on the Controller.
* For resolutions not accessible from the Remote, Use the OSD capability.
5.1 Using the On Screen Display Menus
Regardless of whether you operate the 1T-PCDVI-PCDVI from the front panel or using
the Remote Controller, you will need to become familiar with the OSD (On Screen
Display) menu structure if you wish to take full advantage of the capability of the
product.
Select PC Input
Power On/Off
Select HDMI/DVI Input
Toggle through
the Inputs
Select YPbPr
Input
Select Output
Resolution *
Exit Menu Select Menu (OSD)
Navigate Menus and
adjust parameters.
Select Auto-Adjust
Function
Reset to Factory
Default Setting

8
5.1.1 Menu Navigation:
Pressing the “Menu” button will display the OSD menu. If you are using the front panel
control method, you select the desired function by using the “+” and “-“ keys to navigate
to the desired function and then press the Menu/Enter button again to make the
selection. Next, use the “+” and “-“buttons to make the actual adjustment and press the
Menu/Enter button yet again to save your selection. Escape from the OSD menu modes
by highlighting the word “Exit” in any menu and then pressing the Enter button.
From the IR remote controller, press the menu key to activate the OSD, use the arrow
buttons to navigate to the selection you want and then use the arrow buttons and the
“OK” button to make your adjustment or selection. Press the “Exit” button to escape
from the OSD mode.
5.1.2 Menu Structure
The main structure is as follows: Main Menu
Video (Or PC) Color Output OSD Info
Contrast User VGA H. Position Project
Brightness Normal SVGA V. Position Input
Hue Warm XGA Time Out Output
Sat Cool SXGA Background Date
Sharpness SXGA+ Exit
Picture Mode UXGA
Scale WXGA
NR WXGA+
H-Position1WSXGA
V-Position1WUXGA
Exit 480i
480p
PC Menu1576i
H-Position2576p
V-Position2720p (50/60)
Exit 1080i (50/60)
1080p (50/60)
Native
Note 1: The PC sub-menu is only visible when you have selected PC as your source.
Note 2: H-Position and V-Position are only available when PC mode is selected.
The Video and PC menus appear when Video or PC modes are selected as an input.
Depending on the mode, additional functionality will be exposed when the following