TVT TD-8423IS User manual

Overview
Installation
Cable Connection
1
2
3
Network Cable
2
1
Quick Start Guide
HD PTZ Camera
■ Please read this instruction carefully before using the product
and keep it for further reference.
■ All the examples and pictures used here are for reference only.
■ The contents of this manual are subject to change without
notice.
► Connecting Network Cable
1 Ethernet connector
2
3 Safety wire
Power connector
1
2
3
DC12V
① Loosen the nut from the main element.
② Run the network cable (without RJ 45 connector) through the
both elements. Then crimp the cable with RJ 45 connector.
③ Connect the cable to the hermetic connector. Then tighten the
nut and the main cover.
3
Micro SD Card Installation
Please make sure the wall is strong enough to bear the dome
camera’s weigh and the camera is powered off during
installation.
This PTZ camera supports wall or ceiling mounting. Please select
a way to install as needed. The following instructions are for
reference only.
Insert a micro
SD card
1. Loosen the four screws of
the cover and then remove
the cover.
2. Insert a micro SD card as indicated
above and then install the cover back.
Wall Mounting
1. Pull the cables through the
bracket.
3. Drill the screw holes on the wall
according to the drill template. Then
insert the plastic plugs into the holes.
4. Fix two screws to the holes as
indicated by the arrows (left)
and leave 12mm clearance.
5. Connect the cables and then
hang the bracket on the wall.
6. Fix the bracket to the wall
with four screws.
2. Secure the PTZ camera to the
bracket with screws.
12

MENU
PTZ Camera
Network Cable Network Cable
Switch
Router Computer
4
450043001239 A0
Network Connection
5 Preset Description
Here we take accessing IP camera via LAN for example.
● Access the camera through IP-Tool
① Make sure that the camera and the PC are connected via LAN.
② Find the IP-Tool from the CD and then install it in the computer.
After that, run the IP-Tool as shown below.
Device Network Search
Immediate Refresh
name
name
name
IPC
IPC
IPC
unknown
unknown
unknown
192.168.2 26.201
192.168.1 .2
192.168.1 .3
80
80
80
9008
9008
9008
255.255.
255.255.
255.255.
Modify Netw ork Parameter
Mac Address
IP Address
Modify
CE :98 :23 :75 :3 5 :22
192 .168 . 226 . 201
255 . 255 . 255 . 0
192 .168 . 226 . 1
i
Tip: Enter the administrator password, and
then modify t he network parameters.
Total Device: 3 Local IP Address:192.168.1.4Subnet Mask:255.255.255.0 Gateway: 19 2.168.1.1 DNS：210.21.196.6
Device Name Device Type IP Address Http Port Data Port Subnet Product Mod el
About
Subnet Mask
Gateway
Restore IPC Default Configuration
③ Modify the IP address. The default IP address of this camera is
192.168.226.201. Click the information of the camera listed in the
above table to show the network information on the right hand.
Modify the IP address and gateway of the camera and make sure its
network address is in the same local network segment as the
computer’s. Please modify the IP address of your device according
to the practical situation.
Mac Address
IP Address
Modify Network Parameter
Modify
CE :98 :23 :75 :35 :22
192 . 168 . 1 . 201
255 . 255 . 255 . 0
192 . 168 . 1 . 1
Subnet Mask
Gateway
For example, the IP address of your computer is 192.168.1.4. So the
IP address of the camera shall be changed to 192.168.1.X. After
modification, please enter the password of the administrator and click
“Modify” button to modify the setting.
The default password of the administrator is “123456”.
④ Double-click the PTZ camera listed in the IP-Tool or manually enter
the IP address in the address bar of the web browser to connect the PTZ
camera. Then follow directions to download and install the plugin.
Enter the username and password in the login interface. ⑤
The default username is admin; the default password is 123456.
Call Preset
Call No.90 Preset Run track 1
Run cruise 1
Run 2cruise
Run 3cruise
Run 4cruise
OSD menu
Enable random scan
Enable P-PSCAN
Set left border of P-PSCAN
Set right border of P-PSCAN
Set random scan; Task auto
call the beginning point
Call No.91 Preset
Call No.92 Preset
Call No.93 Preset
Call No.94 Preset
Call No.95 Preset
Call No.97 Preset
Call No.99 Preset
Set No.91 Preset
Set No.92 Preset
Set No.93 Preset
Set Preset
Name:
Password:
Stream Type:
Language
Remember me
admin
1920x1080 25fps
English
Password
Login
Ceiling Mounting
1
instruction.
. Install the ceiling mounting bracket according to the following
2
bracket and fix it with a screw.
. Mount the adapter tube to the 3 Secure the wall mounting
bracket to the ceiling.
.
Adapter tube
4 Connect cables and then hook
the safety wire to the adapter tube.
. 5 Fix the PTZ camera to the
adapter tube with screws firmly.
.