twinkl Spaceship Porthole User manual

Spaceship Porthole
You will need:
• 2 paper plates
• Silver foil
• Scissors
• PVA glue
• Pencil
• Pipe cleaners
• Black paint
• Hole punch
• Coloured paper
• Wool or ribbon
1Paint the front of one paper plate black and leave to dry.
2Cut out the centre circle from the second paper plate, this
should leave you with a ring shape.
3Begin to wrap strips of silver foil over the ring, folding each
piece over the edges and scrunching it behind as you go.
4Continue to do this until the ring is completely covered
in silver foil.
visit twinkl.com

5Now create some space themed objects for your porthole!
Using scissors, cut them out and use PVA glue to stick
them towards the middle of the black plate.
6Cut and bend pipe cleaners to form rings around planets
and arms or antenna for the aliens, then stick on
using PVA glue.
7Spread PVA glue around the underside of the silver ring,
then stick this down onto the black paper plate and firmly
press them together. Then leave to dry.
8Using the hole punch, make a hole through the top of the
porthole. Then thread some wool or ribbon through and
tie in a loop to hang the porthole from.
visit twinkl.com

Spaceship Porthole
You will need:
• 2 paper plates
• Silver foil
• Scissors
• PVA glue
• Pencil
• Pipe cleaners
• Black paint
• Hole punch
• Coloured paper
• Wool or ribbon
visit twinkl.com

Step 1
Spaceship Porthole Craft Instructions
Paint the front of one paper plate black and leave to dry.
visit twinkl.com

Step 2
Spaceship Porthole Craft Instructions
Cut out the centre circle from the second paper plate, this
should leave you with a ring shape.
visit twinkl.com

Step 3
Spaceship Porthole Craft Instructions
Begin to wrap strips of silver foil over the ring, folding each
piece over the edges and scrunching it behind as you go.
visit twinkl.com

Step 4
Spaceship Porthole Craft Instructions
Continue to do this until the ring is completely covered
in silver foil.
visit twinkl.com

Step 5
Spaceship Porthole Craft Instructions
Now create some space themed objects for your porthole!
Using scissors, cut them out and use PVA glue to stick
them towards the middle of the black plate.
visit twinkl.com

Step 6
Spaceship Porthole Craft Instructions
Cut and bend pipe cleaners to form rings around planets
and arms or antenna for the aliens, then stick on
using PVA glue.
visit twinkl.com

Step 7
Spaceship Porthole Craft Instructions
Spread PVA glue around the underside of the silver ring,
then stick this down onto the black paper plate and firmly
press them together. Then leave to dry.
visit twinkl.com