TypeS Plug & Glow LM55879-1 User manual

Instruction Manual
PACKAGE CONTENTS
ON / OFF
36” Power
Cable with 12V
Power Adapter
Automotive
72” Smart Trim
Lighting Kit
Lift Panel Tool
72” Multi-Color
Trim Light &
Extension Cable
Plug & GlowTM
Smart Lighting
Hub Controller
36”
Hardwire
Cable

TECHNICAL SPECIFICATIONS
Working voltage: DC 12V Only
Bluetooth distance:
30ft (no obstacle)
Frequency band: 2.4 ghz
Maximum LED Trim: 4 x per Hub
Maximum amperage draw: 3A
INSTALLATION
Note:
• For use with 12V power only
• Suitable temperature for
installation is 70°F (21°C) or above.
• Choose your desired location.
( – see suggestions above)
•
Use the lift panel tool to increase space
between panels if needed, then carefully
slide trim light into the gap between interior
panels.
WARNING: Do not use lift panel tool to
push against the LED Trim Light.
Lift Panel Tool
• Connect the Trim Light to the Extension Cable
• Peel off the 3M
TM
double-sided tape on the
back of the LED emitter and place it on the
dash board.

POWER
Two power options available
12V plug-in power adapter
12V hardwire
3A fuse
1) Select your desired power connection
and connect to the Plug & Glow
TM
Smart
Lighting Hub Controller
2) Connect LED Trim Light with extension
cable to the Smart Lighting Hub
Controller.
b
b
ON/OFF
a
bb
b
a
+-
APP INSTALLATION
Scan to download APP
Compatible with iPhone 4s &
higher, iPad3, iPad Mini, iPad Air
& higher, and iPod touch 5th
Generation & higher.
Requires iOS 7.0 or higher.
Compatible with phones
with Android™ 4.3 or higher.
Note: not all Android™ phones
are equipped with Bluetooth®
Smart v4.0 required for
this application.
Scan to download APP
• Install Smart Lighting APP on your smart
device. Search for the APP through
the APP Store or Google Play by:
• Or scan above QR code to find the
compatible APP for iOS or Android.
• Once installed, open the
APP and begin enjoying
your Plug & Glow™
experience.
WINPLUS TYPE S LED
LED Trim Light
Extension Cable
Smart Lighting
Hub Controller
NOTE: Match arrows
indicated for correct
orientation. An incorrect
connection will cause
lights to malfunction.

USING THE APP
Home Page
Tap “Smart LED Hub” Icon to start
APP will automatically pair to the Hub
when both are powered on (including
Bluetooth) and within 30ft
USING THE APP CONT...
A
B
C
D
E
F

Master On/Off Switch
A
BLED Zone Functions:
Connect and control up to four
separate zones.
On/Off: Press each zone icon to turn
LED On or Off.
Move Zone Icon:
Press and hold zone icon, select
“Move” to position each zone icon at
your desired location.
Rename Zone Icon:
Press and hold zone icon, select
“Rename” to rename each icon.
(Note: Maximum 4 characters).
Select Multiple:
You can select multiple zones and
control the same setting at once.
Press and hold zone icon, select
“Select Multiple” then select your
desired zone by pressing “Confirm”.
To ungroup your selection, press and
hold zone icon and select “Ungroup”.
Select Vehicle Schematic:
Press>, select your desired vehicle
schematic.
C
D
E
F
Save Preset:
You can save your favorite settings.
After creating your setting, press
"Save Preset" and enter your preset
name. You can save up to 10 preset
settings.
Select Preset:
You can select your previously saved
preset setting, press "Select Preset"
and choose your saved setting.
Delete Saved Preset Setting:
To delete a saved preset setting,
press "Select Preset" and press and
hold the preset setting that you wish
to delete. Press “Yes” to delete.
Select Color:
Choose from up to 49 different
colors. Press "Select Color", select
your desired color and press
“Confirm”.
Brightness:
Slide bar to adjust brightness setting
LED Mode:
Choose from 8 different modes
Note: Music Mode is sound activated.
Speed:
Slide bar to adjust the speed of the
movement from each LED Mode.

WARNING
1. Do not install or use product if it, in any
way, impairs the safe operation of your
vehicle.
2. NEVER use the APP while operating your
vehicle. Use the APP when vehicle is
stationary only.
3. Follow manufacturer’s instructions to
ensure the product is properly & safely
installed.
4. Check your state or provincial laws before
installing. Vehicle owner must comply with all
applicable laws.
5. This product is intended solely for
decorative purposes. Manufacturer and Seller
assume no liability for installation or use,
which are solely the responsibility of the
purchaser.
6. This product is not DOT approved and is
designed and intended for interior uses only.
Not for use in extreme temperature such as
under hood applications.
7. The Manufacturer and Seller are not
responsible or liable for consequential,
incidental, or indirect damages, whether to
person or property, resulting from the
installation or improper use of this product.
PROP 65 WARNING: This product contains
chemicals known to the State of California to
cause cancer, birth defects or other
reproductive harm.
Wash hands after handling.
FCC & IC
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or
change to this equipment. Such modifications or
change could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy, and, if not installed and used in accordance
with the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV
technician for help
The device has been evaluated to meet general RF
exposure requirement. To maintain compliance with

OPTIONAL ACCESSORIES
ML-55879_V1
ACCESSORIES AVAILABLE TO
TAKE YOUR EXPERIENCE TO
THE NEXT LEVEL
PLUG & GLOWTM
SPLITTERS & EXTENSION CABLES
USE ONLY MULTI-COLOR MICRO,
PANEL & STRIP LIGHT EXTENSIONS
For more product and installation
ideas and videos visit us at:
www.winplususa.com
12v DC
72” SMART TRIM LIGHTING KIT
Antenna Type Max. Antenna Gain (dBi)
PCB printed antenna 0
Have a comment or question?
Email us at: [email protected]
or visit us online at: www.winplususa.com
FCC RF exposure guidelines, this equipment should
be installed and operated with a minimum distance of
20cm between the radiator and your body.
CAN ICES-3(B) / NMB-3(B)
This radio transmitter (identify the device by
certification number or model number if Category II)
has been approved by Industry Canada to operate
with the antenna types listed below with the maximum
permissible gain indicated. Antenna types not included
in this list, having a gain greater than the maximum
gain indicated for that type, are strictly prohibited for
use with this device.
Winplus North America, Inc.
820 South Wanamaker Avenue, Ontario,
CA 91761 USA
Tel: [phone]
© 2016 Winplus North America, Inc.
All rights reserved.
3M™ is a trademark of 3M Company.
Apple, the Apple logo, iPhone, iPad, and iPod
touch are trademarks of Apple Inc.
App store is a service mark of Apple Inc.
Android, Google Play, and the Google Play logo are
trademarks of Google Inc.