TYROLIT Hydrostress FSD1274 Series User manual

10989245 en / 05.12.1017
Operating Instructions
Floor Saw
FSD1274
FSD1274 3-speed gearbox
Index 001

Page 2 Floor Saw FSD1274 / FSD1274 3-speed gearbox
Congratulations!
You have decided to purchase a tried and tested TYROLIT-Hydrostress unit and have
thus acquired a highly sophisticated and reliable state-of-the-art unit. The exclusive use
of only TYROLIT Hydrostress spare parts ensures quality and interchangeability. If
maintenance work is neglected or carried out inexpertly we will be unable to honour our
warranty obligations. Any repair work must be carried out by trained personnel only.
Should you need more details concerning your TYROLIT Hydrostress unit in order to
keep it in perfect condition, please contact our after-sales service for further information.
We hope that you enjoy untroubled and fault-free working with your TYROLIT unit.
TYROLIT Hydrostress
Copyright © TYROLIT Hydrostress
TYROLIT Hydrostress AG
Witzbergstrasse 18
CH-8330 Pfäffikon
Switzerland
Tel. [phone]
Fax [phone]

TYROLIT Hydrostress AG
Floor Saw FSD1274 / FSD1274 3-speed gearbox Page 3
1 Safety
These instructions are just one part of the documentation which is supplied together with
the floor saw. These instructions go together with the "Safety Manual / System
Description for Floor Saws" to form a complete set of documentation.
DANGER
Failure to comply with the safety instructions in the "Safety Manual / System Description"
may result in serious injury or death.
►Please ensure that the "Safety Manual / System
Description for Floor saws" has been
read and understood in full.

TYROLIT Hydrostress AG
Page 4 Floor Saw FSD1274 / FSD1274 3-speed gearbox
2 Design
Components
1 Grip
2 Control unit
3 Water valve
4 Operating handle
5 Floodlight
6 Water pump
7 Crane hitching device
8 Cooling water hose
9 Exhaust/ Silencer
10 Air filter
11 Cut indicator roller
12
Water valve
13
Hydrostatic motors
14
Gear box saw blade drive
15
Chassis
16
Blade guard
17
Intermediate drive
18
Saw blade flange
19
Wheels
20
Lifting cylinder
21 Lifting chassis
22
Bearing lifting chassis
23
Base plate
24
Travel drive
25
Rear cut guide
26
Battery
27
Cooler fan
28
Motor

TYROLIT Hydrostress AG
Floor Saw FSD1274 / FSD1274 3-speed gearbox Page 5
Components
29 Cooling water expansion
vessel
30 Cooling water hose
31 Tank filler cap
32 Gas flue
33 Control panel
34 Cut depth indicator
35 Operating handle
36 Gear shift lever saw blade
37 Chassis / Model label
38
Water connection
39
Radiator cover
40
Track adjustment
41
Drive wheel
42
Valve block travel drive
43
Oil pump
44
Hydraulic pump lifting
cylinder
45 Wheel
46
Starter
47
Saw blade flange
48
Drive wheel
49
Gear box saw blade
drive
50
Oil tank travel drive
51
Dieselfilter

TYROLIT Hydrostress AG
Page 6 Floor Saw FSD1274 / FSD1274 3-speed gearbox
3 Function
3.1 Saw blade drive
Saw blade drive (schematic)
1 Mitre gear
2 Drive belt
3 Intermediate drive
4
Drive shaft saw blade
3.2 Lift drive
Lift drive (schematic)
1 Hydraulic cylinder
3.3 Saw blade lowering speed
Saw blade lowering speed
1 Valve saw blade lowering speed

TYROLIT Hydrostress AG
Floor Saw FSD1274 / FSD1274 3-speed gearbox Page 7
3.4 Travel drive
Travel drive (schematic)
1 Hydrostatic motors
2 Hydraulic motors
3 Valve block travel drive ON /
OFF

TYROLIT Hydrostress AG
Page 8 Floor Saw FSD1274 / FSD1274 3-speed gearbox
4 Transport
DANGER
Inexpert transport may result in death or serious injury.
►Floor saws must only be transported with the main motor switched off.
►Only transport vehicles, lifting tools and load suspension devices with sufficient load-
bearing capacity must be used.
►Floor saws must only be hitched by the hitching points provided.
►Appoint an expert marshaller.
►When transporting by crane do not stand underneath suspended load.
►Always have the floor saw in your line of vision while it is being transported.
4.1 Hitching point
Hitching point
1 Crane hitching device

TYROLIT Hydrostress AG
Floor Saw FSD1274 / FSD1274 3-speed gearbox Page 9
5 Initial start-up
5.1 Fitting battery
►Fit battery (for type see Technical Data).

TYROLIT Hydrostress AG
Page 10 Floor Saw FSD1274 / FSD1274 3-speed gearbox
6 Assembly / Set-up
6.1 Mounting grip
►
6.2 Height adjustment handle
►

TYROLIT Hydrostress AG
Floor Saw FSD1274 / FSD1274 3-speed gearbox Page 11
6.3 Mounting saw blade
1.
DANGER
Parts that fly off (segments, concrete splinters, saw blade, etc.) may cause serious
injury or even death.
►Floor saws must only be operated with a blade guard.
►When assembling the saw blade on the right-hand side use the anchoring screw with
the left-hand thread.
When assembling the saw blade on the left-hand side, use the anchoring screw with
the right-hand thread.
►Note the direction or rotation arrows on the saw blade.
2.
1 Anchoring screw
*Note the direction of rotation

TYROLIT Hydrostress AG
Page 12 Floor Saw FSD1274 / FSD1274 3-speed gearbox
3.
C: To prevent the saw blade rotating while being tightened, carefully place the saw blade on the
floor.
6.4 Mounting saw blade on the other side
6.4.1 Disassemble the blade guard
►

TYROLIT Hydrostress AG
Floor Saw FSD1274 / FSD1274 3-speed gearbox Page 13
6.4.2 Disassemble the shaft cover
6.4.3 Assembling the blade guard and shaft cover on the other side
Assembly of the blade guard and the shaft cover is performed in the opposite order to
disassembly.
6.5 Connecting water line
►

TYROLIT Hydrostress AG
Page 14 Floor Saw FSD1274 / FSD1274 3-speed gearbox
7 Operation
7.1 Overview of operating elements
Operating elements
1 Ignition switch
2 Coolant temperature
display
3 Engine warning light
4 Blade speed indicator
5 Engine flue gas
6 Coved for cooler
7 Rope holder for cut
indicator
8 Control valve
9 Emergency Stop
10 Cut depth storage switch
11 Water ON / OFF indicator
12
Cut depth storage indicator
13
Water ON / OFF switch
14
Brake ON / OFF switch
15
Floodlight switch
16
Switch (optional)
17
Travel speed lever
18
Switch "raise"
19
Switch "lower"
20
Height adjustment handle
21 Saw blade coupling switch
22
Cutting depth indicator
23
Floodlight unit
24
Angle adjustment floodlight
unit
25
Water regulation
26
Water delivery ON / OFF
27
Fuel filler cap
28
Locking handle

TYROLIT Hydrostress AG
Floor Saw FSD1274 / FSD1274 3-speed gearbox Page 15
7.2 Check oil and cooling water levels
►Note the details from the motor manufacturer.
7.3 Checking the air filter
The display in the window has the following significance:
Display colour
Significance
Yellow
Air filter in good order
Red
Air filter blocked
►If the air filter is blocked, it must be changed.

TYROLIT Hydrostress AG
Page 16 Floor Saw FSD1274 / FSD1274 3-speed gearbox
7.4 Checking the fuel level
►Check the tank display (1) and top up with diesel as necessary.
7.5 Positioning the floor saw
1. Slide floor saw into the working position.
2. Fit the cutting guides to the floor saw.
7.6 Connecting the water supply
►

TYROLIT Hydrostress AG
Floor Saw FSD1274 / FSD1274 3-speed gearbox Page 17
7.7 Switch on motor
Symbol
Significance
Coupling lever in coupled position
Coupling lever in uncoupled position
Operating handle (2) engaged in 0position
Coupling lever (1) is in the uncoupled position
EMERGENCY STOP switch (5) has been released
1. Turn ignition key (3) to the preheat position in order to preheat the motor.
2. Turn ignition key further to the right in order to start.
Battery and oil pressure displays light during starting and then go out.
3. With engine speed controller (4) set optimum blade speed.

TYROLIT Hydrostress AG
Page 18 Floor Saw FSD1274 / FSD1274 3-speed gearbox
7.8 Lowering / raising saw blade
7.8.1 Lowering example
1. Press the Lower button (1) until the saw blade touches the material to be cut.
2. Set the cutting depth indicator (2) in the 0position.
3. Using the Lower key, lower the saw blade to the desired cutting depth.
4. Button depth stop (3) min. press forward for 3 seconds. Light (4) comes on.
5. The lowering speed can be controlled using the control valve (5).
In order to deactivate the stored cutting depths, gently raised the saw blade and move
back flip switch (3).

TYROLIT Hydrostress AG
Floor Saw FSD1274 / FSD1274 3-speed gearbox Page 19
7.9 Adjusting the feed
Symbol
Significance
Feed adjuster in the forwards direction of travel
Feed adjuster in the backwards direction of travel
Feed adjuster is in the neutral position
Brake is released
Using the feed adjuster (1). Set the direction of travel and speed.

TYROLIT Hydrostress AG
Page 20 Floor Saw FSD1274 / FSD1274 3-speed gearbox
7.10 Correcting the tracking
Correcting the tracking
►If the saw blade drifts, adjust the rear axle with the adjusting screw.