U-Boat 8060 Maintenance manual

CARE AND MAINTENANCE.
The precision mechanism in your watch will provide long-lasting performance
when properly cared for.
We recommend taking your watch to an Authorised Retailer / Authorised Service
Centre every 3-4 years for a check-up and to perform ordinary maintenance on all
mechanical parts.
We also advise taking your watch to an Authorised Retailer / Authorised Service
Centre to change the strap.
Avoid leaving your watch where it is exposed to wide temperature variations,
humidity, the sun and strong magnetic fields.
EN
ENGLISH
3

CHRONOGRAPH FUNCTIONS.
1. Press button H (start/stop) to start the chronograph and the hour/minute
counters. 2. Press button H again to stop the chronograph and once more to
restart it. 3. After noting the time measured, press reset button B when the
chronograph is stopped to return the chronograph hand and counters to zero.
ENGLISH
INSTRUCTIONS FOR USE.
RESET THE CHRONOB
CDATE INDICATOR
DCHRONOGRAPH HOUR COUNTER
ECHRONOGRAPH SECONDS HAND
FWINDER
GCHRONOGRAPH MINUTE COUNTER
HSTART/STOP CHRONOGRAPH
ISECONDS COUNTER
A
B
C
D
I
G
E
H
F
A
LWINDER EXTRACTION BUTTON
L
L
H
B
WINDER COVERA
5

1. Unscrew the winder cover to access the winder .
ENGLISH
AA
FF
L L
B B
HHA
L
B
H
F
POSITION 1
NEUTRAL POSITION
POSITION 2
FIRST CLICK
POSITION3
SECOND CLICK
WATCH FUNCTIONS.
FA
* NB: It is not possible to adjust the date between 9.00 p.m. and 3.00 a.m.
Watch operation position.
Watch winding position.
Press the buttom to put winder in the first position for rapid
date setting.*
Press the buttom for precise time setting. We advise you to turn the
minute hand past the desired time and then back to the exact position.
POSITION 1
NEUTRAL POSITION
POSITION 2
FIRST CLICK
2. Close the winder Fand turn the winder cover Ato its original position
(turn until it stops).
POSITION 3
SECOND CLICK
L F
L
7

Ref. 4882