U-Line SS1095FC Owner's manual

ICE MAKER
Models SS1095FD, SS1095FC, SS1095NF
FEATURES BENEFITS
All specifications subject to change without notice.
KCC Printed in U.S.A.
1. Marine-grade stainless steel –
door, cabinet and grille
Offers a sharp, clean, elegant look and stands
up to the environment.
2. Three mounting flange options:
• SS1095FD –
flange flush to door
• SS1095FC –
flange flush to cabinet
• SS1095NF – no flange
Customize the installation and look that best fits
your needs.
3. Positive catch door latch Automatically engages when door is closed and
allows opening with one hand. Door can also be
propped open when not in use.
4. High ice production Produces up to 23 lbs. of ice per day and stores
12 lbs. of ice.
5. No drain required Allows for easy and convenient installation.
Only needs 1/4 in. outside diameter water line
connection.
6. Front vented – can be built-in
or freestanding
No need for extra fans, air space or special
venting to the outside of the cabin. Do not
obstruct front grille.
7. Conserves water Only 2-3/4 gallons of water required to produce
approximately 22 lbs. of ice.
8. Conserves energy Uses less electricity than a 75-watt light bulb.
9. Field reversible door with
zero clearance swing
Flexible installation options.
10. Corrosive resistant components Hinges and fasteners are stainless steel to
resist corrosion.
• Available in 110/115V 60 cycle or 220/230V 50/60 cycle
• Transparent, high-impact polycarbonate, removable
ice bucket
• Shipping weight: SS1095FD 66 lbs
SS1095FC 64 lbs
SS1095NF 62.5 lbs
• Manual defrost
• Running amps: 2.5
• Maximum start-up amps: 18.0
U-Line Corporation • 8900 N. 55th Street • Milwaukee, Wisconsin 53223 • [phone] • FAX [phone] • www.u-line.com Revised 08/08
SS1095FD
SS1095FC
SS1095NF
ADDITIONAL INFORMATION:

All specifications subject to change without notice.
KCC Printed in U.S.A. U-Line Corporation • 8900 N. 55th Street • Milwaukee, Wisconsin 53223 • [phone] • FAX [phone] • www.u-line.com Revised 08/08
SS1095FD
13-15/16
(35.4)
2-1/2
(6.4)
*POWER
CORD
17-9/16 (44.6)
16-7/8(42.9)
FLANGE
*ON BACK OF UNIT
INCHES(CENTIMETERS)
ADD 1-1/2" (3.8) TO DEPTH
FOR WATER LINE CONNECTION
15-7/8(40.3)
W/FLANGE
3-13/16
(9.7)
1-5/16
(3.3)
24-3/4
(62.9)
26-1/8
(65.3)
W/FLANGE
*WATER INLET
3/4
(1.9)
7-3/4
(19.7)
*ON BACK OF UNIT INCHES(CENTIMETERS)
*WATER INLET
ADD 1-1/2" (3.8) TO DEPTH
FOR WATER LINE CONNECTION
SS1095FC
13-15/16
(35.4)
2-1/2
(6.4)
3-13/16
(9.7) 15-1/16 (38.3)
W/FLANGE
1-5/16
(3.3)
3/4
(1.9)
7-3/4
(19.7)
24-3/4
(62.9)
*POWER
CORD
25-1/4
(64.1)
W/FLANGE
17-9/16
(44.6)
16-7/8
(42.9)
14-3/8(36.5)
FLANGE
*ON BACK OF UNIT INCHES(CENTIMETERS)
*POWER
CORD
*WATER INLET
ADD 1-1/2" (3.8) TO DEPTH
FOR WATER LINE CONNECTION
SS1095NF
13-15/16
(35.4)
2-1/2
(6.4)
3-13/16
(9.7) 1-5/16
(3.3)
3/4
(1.9)
7-13/16
(19.8)
24-3/4
(62.9)
17-9/16
(44.6)
16-7/8
(42.9)
14-3/8
(36.5)