ubabub Nifty User manual

Clear 3-IN-1 Crib
Product Code: US0300
Nifty
revised 04APR19

2
Nifty
Domestic child crib
Clear model
Instruction manual
Congratulations and
thank you for purchasing
an Ubabub product.
With our entire line of
clearly modern nursery
furniture, we are developing
cribs that have the capacity
to convert into a junior
bed and adapt with your
growing child. During the
design and production
of this product we have
selected materials that are
either recyclable or derived
from sustainable practices.
PERSONS REQUIRED ASSEMBLY TIME
TOOLS REQUIRED
– PHILLIPS HEAD SCREWDRIVER
– ALLEN KEY (SUPPLIED)
Contents
Contents & Hardware 3
Warning, Care & Maintenance 5
ALower rails position 10
BFront/Back panels assembly I 11
CFront/Back panels assembly II 12
DFront/Back panels position I 13
EFront/Back panels position II 14
FEnd panel assembly 15
GBaseplate assembly 16
HClose extra holes 17
IMattress support position 18
JFinished assembly 19

3
Contents
(D) Mattress Support x 1 (E) Front Lower
Rail x 1
(F) Back Lower
Rail x 1
(A) Left End
Panel x 1
(B) Right End
Panel x 1
(C) Front / Back
Panel x 2
(G) Left
Frame x 2
(H) Right
Frame x 2 (I) Top Frame x 2 (J) Bottom Frame x 2

4
Hardware
(H11) Allen Key x 1
(H4) 3/5” Round
Head Bolt x 16
(H10) Support Plate x 4
(H7) Wood Dowel x 12
(H2) 1-1/4” Allen
Head Bolt x 8
(H1) 2-1/4” Allen
Head Bolt x 8
(H3) 3/5” Allen
Head Bolt x 16
(H6) Lock Washer x 24
(H5) Washer x 16
(H9) Cam lock x 4
(H8) Cam bolt x 4
(H12) 1-4/5” Allen
Head Bolt x 4
(H13) Curved
Washer x 4

5
WARNING:
Failure to follow these warnings and
the assembly instructions could result
in serious injury or death.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING
CRIB. KEEP THE MANUAL FOR FUTURE USE.
WARNING:
Parents should ensure a safe environment for the child by
checking regularly, before placing the child in the product,
that every component is properly and securely in place.
Please do NOT remove any wood screws in the normal disassembly
of the crib.
WARNING:
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE
AT LEAST 27 1/4 INCHES (69CM) BY 51 5/8 INCHES (131CM)
WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM).
Please read the Caution and
Warning Statements insert
before using your crib.

6
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never
place additional padding under an infant.
•
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed•
on their backs to sleep, unless otherwise advised by your physician.
Strangulation Hazard: Strings can cause strangulation! Do not place items with•
a string around a child’s neck, such as hood strings or pacifier cords. Do not
place cords, straps,or similar items that could become wound around the child’s
neck in or near this crib. Do not suspend strings over a crib or attach strings to
toys.
To help prevent strangulation tighten all fasteners. A child can trap parts of the•
body or clothing on loose fasteners.
DO NOT place a crib near a window where cords from blinds or drapes may•
strangle a child. Do not place this crib near a window or a patio door where a
child could reach the cord of a blind or curtain and be strangled.
Fall Hazard: When a child is able to pull to a standing position, set the mattress•
to the lowest position and remove bumper pads, large toys and other objects
that could serve as steps for climbing out.
•
• Check this product for damaged hardware, loose joints, loose bolts or other
fasteners, missing parts or sharp edges before and after assembly and frequently
during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if
any parts are missing, damaged or broken. DO NOT substitute parts. Contact
MILLION DOLLAR BABY CO. for replacement parts and instructional literature if needed.
DO NOT use a water mattress with this crib.•
For cribs equipped with teething rails, replace teething rail if damaged, cracked•
If refinishing, use a non-toxic finish specified for children’s products.•
Never use plastic shipping bags or other plastic films as mattress covers•
because they can cause suffocation.
Infants can suffocate in gaps between crib sides when used with a mattress•
that is too small.
• Follow warnings on all products in a crib.
• Ensure that the sides are properly latched or locked in place when the crib is occupied.
• The mattress used with this crib should not be more than 15cm thick and should be of
such length with width that the gap between the mattress and the sides of the crib is no
more than 3cm when the mattress is pushed into the corner of the crib.
or loose.
Do not use this crib if the child is able to climb out unaided or is taller than
35 in. (89cm).
• Do not use this crib if you cannot exactly follow the accompanying instructions.

7
Cleaning Acrylic:
We offer special guidelines for caring and maintaining our lucite
furniture collection.
CAUTION: Never use window cleaner, ammonia
products, or other chemical sprays on acrylic!
Distinctive acrylic furniture and accessories can last an eternity with
minimal care and maintenance. Acrylic care consists of no more than
normal wipe-cleaning to keep it looking new – but care should be
taken to avoid scratches.
Acrylic is also stable when exposed to sunlight, so it will not turn
yellow or crack even when used in normal outdoor environments.
Use only a very soft damp cloth when cleaning acrylic surfaces.
It is possible to scratch acrylic, so NEVER use any scouring com-
pounds or chemical cleaners such as Windex or other glass cleaners
(even if they are environmentally friendly, organic or non-scented).
Should anything ever stick to an acrylic surface (such as an adhesive
label or gummy substance) do not use any type of solvent.
Never use the same cloth that you clean other household items
with – it can retain dirt, grit, and chemical residues that may harm
your acrylic items. We recommend using a new or separate cloth for
your acrylic care.
However, scratches do happen – but don’t worry! Unlike other
materials, scratches on acrylic can be easily removed with Novus
products. We recommend Novus products for cleaning your lucite
furniture. Keep your acrylic surfaces free from dust and dirt, with
“Novus 1”. It’s a clear, anti-static formula specially created to
remove the negative charge that can attract dust and dirt to the
surface of acrylic. It is easy to use: simply wipe on and wipe off! Or
use “Novus 2” anti-static formula to remove surface scratches while
it cleans. “Novus 3” is for removal of heavier scratches and requires
Novus 2 for final finishing. You can find Novus products at
www.plexi-craft.com.

8
Please refer to the label (sample below) on the inside face
of the headboard. Record the model/ item number and serial
number of your crib, the name of the store where you made
the purchase, the date of purchase and the wood finish in
the box to the lower right.
WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL
WARRANTY AND REPLACEMENT PART REQUESTS. PLEASE
REFER TO THE LAST PAGE OF THIS INSTRUCTION SHEET FOR
WARRANTY INFORMATION. KEEP THIS MANUAL FOR FUTURE
REFERENCE.
THIS PRODUCT CONFORMS TO THE
APPLICABLE REGULATIONS OF THE
CONSUMER PRODUCTS SAFETY COMMISSION.
www.themdbfamily.com
CAUTION: ANY MATTRESS USED IN THIS CRIB
MUST BE AT LEAST 27 1/4 INCHES (69CM) BY
51 5/8 INCHES (131CM) WITH A THICKNESS
NOT EXCEEDING 6 INCHES (15CM).
SAMPLE LABEL
Storage:
Care and Cleaning:
• Solid woods exchange moisture with the air adjusting to major
changes in room temperature and humidity. Therefore, it is
best to place your furniture away from heating or air-
conditioning vents.
• Sunlight is not friendly to solid wood furniture and prolonged
direct exposure to harsh sunlight can discolor the finish. Be
careful not to place your furniture in direct sunlight for
extended periods of time. As with all your fine furniture, blot up
spills immediately.
• Do not scratch or chip the finish. Do not use abrasive chemicals
for cleaning. Clean with mild soap on a soft rag. Rinse and dry
thoroughly. If you ever refinish this furniture, be sure to use only
a non-toxic finish specified for children’s products. If you choose
to refinish this furniture, the warranty will be voided.
8700 REX RD.
PICO RIVERA, CA 90660

9
IF YOU WOULD LIKE TO ORDER
REPLACEMENT OR MISSING PARTS
PLEASE VISIT US AT:
WWW.THEMDBFAMILY.COM/SUPPORT
OR YOU CAN CONTACT US BY MAIL:
MILLION DOLLAR BABY CO.
8700 REX RD.
PICO RIVERA, CA 90660
We will replace any missing parts at the time
of purchase or any defective item within
a one year period from the date of original
purchase. Please keep your receipt so that
we may process your warranty request. This
warranty only covers new units with original
packaging and ownership, and is not trans-
ferable. It does not cover any used, second-
hand or demo models.
This warranty does not cover any damaged
or defective parts that result from installation
and assembly, normal wear and tear, abuse,
negligence, improper use or alteration to the
finish, design, and hardware. The specific
legal rights of this warranty may vary from
state to state. Some states do not allow any
exclusion or limitation of incidental damages.
Some states do not allow limitation on how
long an implied warranty lasts.
ONE YEAR LIMITED WARRANTY:
Registering your product is even easier than
before. You can register your product on our
website at: www.themdbfamily.com/registrations

10
ALower rails position
H7 X2
B
E
F
H12
H6
H13

11
BFront/Back panels assembly I
X2
G
H
I
31 2
Insert the cam bolt (H8) to the top
frame and cam lock (H9) to the
side frame.
Insert cam lock nut. Use screwdriver to turn cam
lock nut clockwise until tight.
H8
H9
H7

12
CFront/Back panels assembly II
* REPEAT STEP B & C TO
ASSEMBLE BOTH FRONT
AND BACK PANELS.
I
G
H
C
J
H6
H5
H1
H7
X2

13
DFront/Back panels position I
X4
F
E
C
C
B
H6
H5
H2

14
EFront/Back panels position II
X4
E
F
C
C
B
H6 H5
H1

15
FEnd panel assembly
F
E
B
A
C
C
X2
H7
H12
H6
H13
H6
H5
H2
X4

16
GBaseplate assembly
H10
X4
E
F
B
A
H4
H4
H4 H4

17
HClose extra holes
FOR YOUR BABY’S SAFETY:
THIS CRIB IS SUPPLIED WITH
EXTRA BOLTS THAT CLOSE
HOLES ACCESSIBLE TO YOUR
BABY. FAILURE TO USE THESE
BOLTS COULD RESULT IN
INJURY IF YOUR BABY’S
FINGERS GET STUCK IN THE
HOLES. WE RECOMMEND
THAT YOU USE THE BOLTS TO
CLOSE THE HOLES.
H3
X4
B
A

18
IMattress support position
D
B
A
H3 H6 X4
* Make sure the mattress support (D)
is installed FLAT SIDE UP.
* Make sure the mattress support (D)
is level.

19
KEEP THIS MANUAL IN A SAFE PLACE FOR
FUTURE REFERENCE.
Recheck all screws and bolts to be sure they are
fastened securely. Do not overtighten.
Before using your crib, please read all cautionary
statements on the insert sheet.
Toddler bed rail (UB0399) is not included, sold separately.
Please contact your retailer to purchase.
JFinished assembly

20
Made in Vietnam