Ubiquiti airMAX AM-5G20-90 User manual

Package Contents
Antenna
Protective Shroud
U-Brackets (Qty. 2)

Pole Brackets (Qty. 2)
Pole Clamps (Qty. 2)
Carriage Bolts (Qty. 4)

Serrated Flange Bolts (Qty. 4)
Serrated Flange Nuts (Qty. 8)
RF Cables (Qty. 2)
Installation Requirements
•Rocket®M5 or RocketM5 GPS (sold separately)
•12 mm and 13 mm wrenches
We recommend that you protect your networks from harmful outdoor
environments and destructive ESD events with industrial-grade,
shielded Ethernet cable from Ubiquiti. For more details,
visit ui.com/toughcable
Hardware Installation

1.

2.

3.

4.

5.

Note:
Orient both U-Brackets as shown.
6.

7.

Note:
Hand-tighten the bolts.

8.

9.

Note:
The antenna has an electrical downtilt of 2°.
10.

Note:
The brackets may slide along the pole, depending on the angle of the
elevation tilt.
11.

Specifications
AM-5G20-90
Dimensions 700 x 135 x 70 mm
(27.56 x 5.32 x x 2.76")
Weight (Mount Included) 5.9 kg
(13.01 lb)
Frequency 5.15 - 5.85 GHz
Gain
19.4 - 20.3 dBi
HPOL Beamwidth
91° (6 dB)
VPOL Beamwidth 85° (6 dB)
Elevation Beamwidth 4°
Electrical Downtilt
2°
Max. VSWR
1.5:1
Wind Survivability 200 km/h
(125 mph)
Wind Loading 182 N @ 200 km/h
(41 lbf @ 125 mph)
Polarization
Dual Linear
Cross-Pol Isolation
28 dB Min.
ETSI Specification EN 302 326 DN2
Mounting Universal Pole Mount, Rocket Bracket, and Weatherproof
RF Jumpers Included
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING:
Do not use this product in location that can be submerged by water.
WARNING:
Avoid using this product during an electrical storm. There may be a remote risk of
elec
tric shock from lightning.
Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current
requirements indicated on the manufacturer’s label. Connection to a different
power source than those specified may result in improper operation, damage to
the equipment or pose a fire hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should
be provided only by a qualified service technician.
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual
basis, and, where applicable, specify arbitration instead of jury trials or class actions.
Compliance
RF Exposure Warning
The antenna and transmitter must be installed to provide a separation distance from all
persons and must not be located or operating in conjunction with any other antenna or
transmitter. For the specific separation distance, refer to the Quick Start Guide for your
Rocket device (transmitter).
L’antenne et l’émetteur doit être installé pour fournir une distance de séparation de
toute les personnes et ne doit pas être situé ou opérant en conjonction avec une autre
antenne ou un autre émetteur. Pour la distance spécifique de séparation, se référer au
Guide de démarrage rapide pour votre appareil Rocket (l’émetteur).
WEEE Compliance Statement
Declaration of Conformity
Online Resources
© 2020 Ubiquiti Inc. All rights reserved.