Ubiquiti RD-5G34 User manual

28/09/2020 RD-5G34 Quick Start Guide
https://dl.ubnt.com/qsg/RD-5G34/RD-5G34_EN.html 1/14
Dish Reector Antenna Feed Mount Bracket
Protective Shroud Pole Clamps (Qty. 2) Stabilizer Brackets (Qty. 2)
RF Cables (Qty. 2) Elevation Rod M12x180 Carriage Bolts (Qty. 4)
M10x100 Bolts (Qty. 2) M10x25 Carriage Bolts (Qty. 3) M4 Screws (Qty. 6)
Package Contents
RD-5G34 Quick Start Guide

28/09/2020 RD-5G34 Quick Start Guide
https://dl.ubnt.com/qsg/RD-5G34/RD-5G34_EN.html 2/14
Installation Requirements
5 GHz Rocket® radio (sold separately)
Phillips #1 screwdriver
16 mm or 5/8" wrench
24 mm wrench
Shielded Category 5 (or above) cabling with drain wire should be used for all wired
Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti.
For more details, visit ui.com/toughcable
Hardware Installation
IMPORTANT: Handle the Dish Reector with care. Deformations in its shape may
reduce the antenna’s effectiveness.
1.
IMPORTANT: Do not handle the antenna by the Antenna Feed once the feed is
connected.
2.
RD-5G34 Quick Start Guide

28/09/2020 RD-5G34 Quick Start Guide
https://dl.ubnt.com/qsg/RD-5G34/RD-5G34_EN.html 3/14
3.
4.
RD-5G34 Quick Start Guide

28/09/2020 RD-5G34 Quick Start Guide
https://dl.ubnt.com/qsg/RD-5G34/RD-5G34_EN.html 4/14
5.
6.
RD-5G34 Quick Start Guide

28/09/2020 RD-5G34 Quick Start Guide
https://dl.ubnt.com/qsg/RD-5G34/RD-5G34_EN.html 5/14
7.
8.
9.
RD-5G34 Quick Start Guide

28/09/2020 RD-5G34 Quick Start Guide
https://dl.ubnt.com/qsg/RD-5G34/RD-5G34_EN.html 6/14
10.
11.
RD-5G34 Quick Start Guide

28/09/2020 RD-5G34 Quick Start Guide
https://dl.ubnt.com/qsg/RD-5G34/RD-5G34_EN.html 7/14
12.
13.
RD-5G34 Quick Start Guide

28/09/2020 RD-5G34 Quick Start Guide
https://dl.ubnt.com/qsg/RD-5G34/RD-5G34_EN.html 8/14
14.
RD-5G34 Quick Start Guide

28/09/2020 RD-5G34 Quick Start Guide
https://dl.ubnt.com/qsg/RD-5G34/RD-5G34_EN.html 9/14
15.
RD-5G34 Quick Start Guide

28/09/2020 RD-5G34 Quick Start Guide
https://dl.ubnt.com/qsg/RD-5G34/RD-5G34_EN.html 10/14
16.
RD-5G34 Quick Start Guide

28/09/2020 RD-5G34 Quick Start Guide
https://dl.ubnt.com/qsg/RD-5G34/RD-5G34_EN.html 11/14
17.
RD-5G34 Quick Start Guide

28/09/2020 RD-5G34 Quick Start Guide
https://dl.ubnt.com/qsg/RD-5G34/RD-5G34_EN.html 12/14
Specications
RocketDish RD-5G34
Dimensions 1050 x 1050 x 421 mm
(41.34 x 41.34 x 16.57")
Weight 13.5 kg
(29.76 lb)
Frequency 5.1 - 5.9 GHz
Gain 34 dBi
HPOL Beamwidth 3° (3 dB)
VPOL Beamwidth 3° (3 dB)
Front-to-Back Ratio -42 dB
RD-5G34 Quick Start Guide

28/09/2020 RD-5G34 Quick Start Guide
https://dl.ubnt.com/qsg/RD-5G34/RD-5G34_EN.html 13/14
RocketDish RD-5G34
Max. VSWR 1.7:1
Wind Survivability 200 km/h
(125 mph)
Wind Loading 1,779 N @ 200 km/h
(400 lbf @ 125 mph)
Polarization Dual Linear
Cross-Pol Isolation 35 dB Min.
Mounting Universal Pole Mount, Rocket Bracket, and Weatherproof
RF Jumpers Included
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specied by the manufacturer.
WARNING: Do not use this product in location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a remote risk of
electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements indicated on
the manufacturer’s label. Connection to a different power source than those specied may result in
improper operation, damage to the equipment or pose a re hazard if the limitations are not
followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a
qualied service technician.
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and,
where applicable, specify arbitration instead of jury trials or class actions.
Compliance
RF Exposure Warning
The antenna and transmitter must be installed to provide a separation distance from all persons and
must not be located or operating in conjunction with any other antenna or transmitter. For the specic
separation distance, refer to the Quick Start Guide for your Rocket device (transmitter).
RD-5G34 Quick Start Guide

28/09/2020 RD-5G34 Quick Start Guide
https://dl.ubnt.com/qsg/RD-5G34/RD-5G34_EN.html 14/14
L’antenne et l’émetteur doit être installé pour fournir une distance de séparation de toute les personnes
et ne doit pas être situé ou opérant en conjonction avec une autre antenne ou un autre émetteur. Pour
la distance spécique de séparation, se référer au Guide de démarrage rapide pour votre appareil
Rocket (l’émetteur).
WEEE Compliance Statement
Declaration of Conformity
Online Resources
© 2020 Ubiquiti Inc. All rights reserved.
RD-5G34 Quick Start Guide