Ubiquiti UniFi Cloud Key Gen2 Plus User manual

UniFi Cloud Key Gen2 Plus
Package Contents
System Requirement
Web Browser: Google Chrome (Other browsers may have limited functionality.)
Hardware Overview
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

HDD Bay
LCD Screen
Removable hard drive tray for 2.5" SATA drive. The Cloud Key G2 Plus only
supports hard drives that can operate on 5V power. Hard drives that require
additional power are not supported.
Device Status display. Automatically rotates status screens for enabled controllers.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

UniFi Network Display
UniFi Protect Display
LCD Display for UniFi Network
Icon Description
UniFi Network Controller name
Current WAN bandwidth usage
Status of Network Cloud Access
Number of managed UniFi Access Points
Number of client devices on the network
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Power Button
Reset
microSD Slot
LCD Display for UniFi Protect
Icon Description
UniFi Protect Controller name and bandwidth
Total camera(s) recording bitrate
Status of Protect Cloud Access
Number of active cameras registered in UniFi Protect
Time of last motion detected by UniFi Protect
Press to turn the Cloud Key Gen 2 Plus on or off.
The Reset button serves two functions:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than
five seconds, until the status LED begins flashing white.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

USB Type C Port
USB Type C Power Port
Ethernet Port
Optional slot used for external backup (microSD card not included).
Reserved for future use.
Used for power if PoE is not available. Quick Charge 2.0 or Quick Charge 3.0-
compliant USB power adapter is required.
Connects to a gigabit switch port on your LAN. Power can be provided by an 802.3af
PoE switch, such as the UniFi PoE Switch.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

LED
White Device is ready to be configured
Flashing White
Device is booting up
Device is initializing/deinitializing
Heartbeat White Firmware update in process
Blue Device is configured and ready
Flashing Blue
Main power has been lost and device is counting
down.
If power is restored within 10 seconds, the device will
return to its previous state. If power is not restored
within 10 seconds, the device will safely shutdown.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Security Slot
Rack-Mount Notch
13-Pin Connector
Slow Flashing Blue Client connected to device via Bluetooth (BLE)
Flashing White/Blue
Device is in recovery mode.
The LED will cycle through a pattern at one-second
intervals, between off, white, and blue.
Allows the Cloud Key Gen 2 Plus to be used with a Kensington security lock (not
included). When used, it also prevents removal of the HDD while the device is in
use.
Secures the Cloud Key Gen2 Plus into the docking bay of the optional Rackmount
Accessory, model CKG2-RM (sold separately). The Rackmount Accessory allows
you to install the Cloud Key Gen2 Plus in a standard 19" rack.
Note: The Rackmount Accessory is completely optional and not required
for the Cloud Key Gen2 Plus to function.
Connects the Cloud Key Gen2 Plus to the optional Rackmount Accessory, model
CKG2-RM (sold separately). The CKG2-RM has a docking bay for the Cloud Key
Gen2 Plus and allows you to install it in a standard 19" rack.
Note: Out of the box, the 13-Pin Connector is covered with a black sticker
to protect it from dust and dirt. Only remove the sticker if using the Cloud
Key Gen2 Plus with the optional Rackmount Accessory.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

HDD Latch
Releases the HDD tray from the drive bay.Releases the HDD tray from the drive bay.
WARNING: Do not operate the HDD Latch while the Cloud Key Gen2 Plus
is in use or powered on.
Hardware Installation
1.
2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Powering the Cloud Key Gen2 Plus
Use an 802.3af-compliant switch, such as a UniFi PoE Switch, a USB power source, or
48V PoE adapter (not included).
UniFi Switch
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

USB Power Source
Connect a USB cable (not included) from the Cloud Key Gen 2 Plus directly to a USB
power source: Quick Charge 2.0 or Quick Charge 3.0 compliance is required.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Optional Rackmount Accessory
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

When connecting the Cloud Key Gen2 Plus to the Rackmount Accessory, the width of
the Docking Bay must be adjusted to accommodate the dimensions. To adjust the
Docking Bay:
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.
3. Insert the Cloud Key Gen2 Plus into the docking bay once the following three
conditions are met:
a. The 13-pin connector is face up
b. The LCD screen is face forward
c. There is no Ethernet cable connected to the Ethernet Port on the Cloud Key Gen2
Plus
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Warning: To prevent creating a loop or other unfavorable behavior on the
network, only one Ethernet connection should be used. Do not use the Ethernet
port on the Cloud Key Gen2 Plus and the Rackmount Accessory
simultaneously.
Setting Up UniFi Network via App
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Note: Ensure that Bluetooth is enabled on your mobile device. You will need to
set up the Cloud Key Gen2 Plus with your mobile device and be within 1.5 m
(5') from where it is installed.
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

3.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

4.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD