Ubiquiti UniFi USW-Industrial User manual

UniFi Switch Screws (Qty. 6) Screw Anchors (Qty. 6)
Power Cord
Package Contents
Installation Requirements
Drill with 6 mm drill bit
Phillips screwdriver
Cat5/6 UTP cable for indoor installations. Plenum-rated cabling for plenum spaces.
System Requirements
Linux, Mac  OS  X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.8 or above recommended
Web Browser: Google Chrome (Other browsers may have limited functionality)
UniFi Controller software v5.10.x (or newer), available at: ui.com/download/uni
Hardware Overview
USW-Industrial Quick Start Guide

System LED
PoE LED
Link/Speed/Activity LED
Ports 1 - 8
Ports 9 - 10
Flashing White Initializing.
Steady White Factory defaults, waiting for adoption.
Alternating White/Blue Device is busy; do not touch or unplug it. This usually indicates that a process such as a rmware upgrade is
taking place.
Steady Blue Successfully adopted by a network and working properly.
Flashing Blue
This is used to locate a device.
When you click Locate in the UniFi Controller software,
the System LED will ash blue. The software will also
display the location of the UniFi Switch on the  map.
Off PoE Disabled
Amber 802.3af/at/bt PoE
Off No Link
Amber Link Established at 10 or 100
 Mbps
Flashing Indicates Activity
Green Link Established at 1000 Mbps (1 Gbps)
Flashing Indicates Activity
RJ45 ports support 10/100/1000 Ethernet connections and 802.3af/at/bt PoE output.
RJ45 ports support 10/100/1000 Ethernet connections.
USW-Industrial Quick Start Guide

Reset Button
This button serves two functions for the UniFi Switch:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than ve
seconds.
Hardware Installation
You have two options for mounting:
Screws and Screw Anchors You can use the included Screws and Screw Anchors. Go to
"Wall Mounting" .
Machine Screws You can use eight M4 machine screws (not included), which must be long
enough to extend 6 mm into the Switch.
Wall Mounting
1.
USW-Industrial Quick Start Guide

2.
3.
USW-Industrial Quick Start Guide

4.
Connecting Power
USW-Industrial Quick Start Guide

Connecting Ethernet
1.
2.
Software Installation
Download and install the latest version of the UniFi Controller software at
ui.com/download/uni and follow the on-screen instructions.
USW-Industrial Quick Start Guide

Note: If you already have UniFi Controller v5.10.x or newer installed, skip to
"Adopting the UniFi Switch" .
After you have installed the software and run the UniFi Installation Wizard, a login screen will
appear for the UniFi Controller management interface. Enter the admin name and password
that you created and click Sign In.
You can manage your network and view network statistics using the UniFi Controller
management interface.
To adopt the UniFi Switch, proceed to "Adopting the UniFi Switch" .
For information on conguring and using the UniFi Controller software, refer to the User
Guide on the website: ui.com/download/uni
Adopting the UniFi Switch
1. From the UniFi Controller dashboard, click Devices in the left menu bar.
USW-Industrial Quick Start Guide

2. On the Devices screen, locate the UniFi Switch in the list of devices under the Model
column. To adopt the UniFi Switch, click Adopt.
3. The System LED on the UniFi Switch will turn blue to conrm that it has been successfully
adopted.
Specications
USW-Industrial
Dimensions 254 x 235 x 60 mm
(10 x 9.25 x 2.36")
Weight 3.85 kg (8.49 lb)
Interfaces
Networking (8) 10/100/1000 802.3bt PoE RJ45 Ports
(2) 10/100/1000 RJ45 Ports
Management Ethernet In-Band
Power Method 100 - 240 VAC, 50/60 Hz Universal Input
Power Supply AC/DC, Internal, 450W DC
Supported Voltage Range AC Input: 100 to 240VAC, Max. 6A
Max. Power Consumption
(Excluding PoE Output) 20W
LEDs
System Status
RJ45 Ports PoE, Speed/Link/Activity
ESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV
Shock and Vibration ETSI300-019-1.4 Standard
Operating Temperature
Internal AC/DC @ 450W -40 to 50° C (-40 to 122° F)
Internal AC/DC @ 240W -40 to 60° C (-40 to 140° F)
Operating Humidity 5 to 95% Noncondensing
USW-Industrial Quick Start Guide

USW-Industrial
Certications CE, FCC, IC
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specied by the manufacturer.
WARNING: Failure to provide proper ventilation may cause re hazard. Keep at least 20 mm of
clearance next to the ventilation holes for adequate airow.
WARNING: To reduce the risk of re or electric shock, do not expose this product to rain or
moisture.
WARNING: Do not use this product in location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a remote risk of
electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the
manufacturer’s label. Connection to a different power source than those specied may result in
improper operation, damage to the equipment or pose a re hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a
qualied service technician.
3. This equipment is provided with a detachable power cord which has an integral safety ground wire
intended for connection to a grounded safety outlet.
a. Do not substitute the power cord with one that is not the provided approved type. Never use an
adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
b. The equipment requires the use of the ground wire as a part of the safety certication, modication
or misuse can provide a shock hazard that can result in serious injury or death.
c. Contact a qualied electrician or the manufacturer if there are questions about the installation prior
to connecting the equipment.
d. Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate
short-circuit backup protection.
e. Protective bonding must be installed in accordance with local national wiring rules and regulations.
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where
applicable, specify arbitration instead of jury trials or class actions.
Compliance
FCC
USW-Industrial Quick Start Guide

Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operations of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
ISED Canada
CAN ICES-3(A)/NMB-3(A)
Australia and New Zealand
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this
equipment may cause radio interference.
CE Marking
CE marking on this product represents the product is in compliance with all directives that are applicable
to it.
WEEE Compliance Statement
Declaration of Conformity
Online Resources
USW-Industrial Quick Start Guide

© 2020 Ubiquiti Inc. All rights reserved.
USW-Industrial Quick Start Guide