Ubiquiti US-16-XG User manual

UniFi Switch Power Cord Rack-Mount Brackets (Qty. 2)
Bracket Screws (Qty. 8) Mounting Screws (Qty. 4) Cage Nuts (Qty. 4)
Package Contents
Installation Requirements
Phillips screwdriver (for rack- or wall-mounting)
Standard-sized, 19” wide rack with a minimum of 1U height available (for rack-mounting)
Use compatible ber SFP+ modules with the appropriate ber optic cabling. For
information about compatible ber SFP+ modules, visit: community.ubnt.com/uni
For indoor applications, use Category 6A (or above) UTP cabling approved for indoor use.
For outdoor applications, shielded Category 6A (or above) cabling should be used for all
wired Ethernet connections and should be grounded through the AC ground of the power
supply.
We recommend that you protect your networks from harmful outdoor environments and
destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For
more details, visit: ui.com/toughcable
Note: Although the cabling can be located outdoors, the UniFi Switch itself should be
housed inside a protective enclosure.
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.6 (1.8 or newer recommended)
Web Browser: Google Chrome (Other browsers may have limited functionality.)
US-16-XG Quick Start Guide

System LED
SFP+ Speed/Link/Act LED (Ports 1 - 12)
RJ45 Speed/Link/Act LED (Ports 13 - 16)
SFP+ (Ports 1 - 12)
RJ45 (Ports 13 - 16)
Reset Button
UniFi Controller software v5.4 or newer, available at: ui.com/download/uni
Hardware Overview
Click here for detailed descriptions.
Off No Link
Green Solid: 1 Gbps Link Established
Flashing: Activity
White Solid: 10 Gbps Link Established
Flashing: Activity
Off No Link
Green Solid: 1 Gbps Link Established
Flashing: Activity
White Solid: 10 Gbps Link Established
Flashing: Activity
Hot-swappable SFP+ ports support 1 Gbps and 10 Gbps connections.
RJ45 ports support 1 Gbps and 10 Gbps Ethernet connections.
This button serves two functions for the UniFi Switch:
Restart Press and release the Reset button quickly.
US-16-XG Quick Start Guide

Console Port
DC Input
Power Port
Restore to Factory Default Settings Press and hold the Reset button for more than ve
seconds.
Console Port
RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-
DB9, serial console cable, also known as a rollover cable, to connect the Console port to
your computer. Then congure the following settings as needed:
Baud rate 115200
Data bits 8
Parity NONE
Stop bits 1
Flow control NONE
The 48/24VDC input can connect a redundant or stand-alone DC power source (not
included) with minimum power: 56W, 57 to 20V.
Note: You can use the redundant DC power source as a hot spare; if the internal
AC/DC power supply no longer provides power, the UniFi Switch will switch to
the DC power source without interrupting its operation.
Connect the included Power Cord to the Power port.
Hardware Installation
Mounting in a Rack (Optional)
1.
US-16-XG Quick Start Guide

2. 
OR
US-16-XG Quick Start Guide

Connecting Power
1.
US-16-XG Quick Start Guide

2.
Connecting SFP+
1.
US-16-XG Quick Start Guide

2.
3.
US-16-XG Quick Start Guide

For information about compatible ber SFP+ modules, visit: community.ubnt.com/uni
Connecting RJ45
1.
2.
US-16-XG Quick Start Guide

Software Installation
Download and install the latest version of the UniFi Controller software at
ui.com/download/uni and follow the on-screen instructions.
Note: If you already have UniFi Controller v5.4 or higher installed, go to the section,
Adopting the UniFi Switch.
After you have installed the software and run the UniFi Installation Wizard, a login screen will
appear for the UniFi Controller management interface. Enter the username and password
that you created and click Sign In.
US-16-XG Quick Start Guide

You can manage your network and view network statistics using the UniFi Controller
management interface.
To adopt the UniFi Switch, proceed to the section, Adopting the UniFi Switch.
For information on conguring and using the UniFi Controller software, refer to the User
Guide on the website: ui.com/download/uni
Adopting the UniFi Switch
1. From the UniFi Controller dashboard, click Devices in the left menu bar.
2. Locate the UniFi Switch in the list of devices under the Model column. Click Adopt.
3. The System LED on the UniFi Switch will turn blue to conrm that it has been successfully
adopted.
US-16-XG Quick Start Guide

Specications
US-16-XG
Dimensions 443 x 221 x 43 mm (17.44 x 8.70 x 1.69")
Weight 2.67 kg (5.89 lb)
With Mount Brackets 2.76 kg (6.04 lb)
Total Non-Blocking Line Rate 160 Gbps
Max. DC Power Consumption 36W
(excludes SFP/SFP+ modules)
Power Method
AC 100-240VAC/50-60 Hz, Universal Input
DC 48VDC/24VDC
Power Supply AC/DC, Internal, 56W DC
Supported Voltage Range 100 to 240VAC
57 to 20VDC
Rack-Mount Yes, 1U High
ESD/EMP Protection Air: ± 24 kV, Contact: ± 24 kV
Shock and Vibration ETSI300-019-1.4 Standard
LEDs Per Port
SFP+ Data Ports Speed/Link/Activity
RJ45 Data Ports Speed/Link/Activity
Interfaces
Networking Interfaces (12) 1/10 Gbps SFP+ Ethernet Ports
(4) 1/10 Gbps RJ45 Ethernet Ports
Management Interface (1) RJ45 Serial Port, Ethernet In-Band
Operating Temperature -5 to 40° C (23 to 104° F)
Operating Humidity 5 to 95% Noncondensing
Certications CE, FCC, IC
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specied by the manufacturer.
WARNING: Failure to provide proper ventilation may cause re hazard. Keep at least 20 mm of
clearance next to the ventilation holes for adequate airow.
WARNING: To reduce the risk of re or electric shock, do not expose this product to rain or
moisture.
WARNING: Do not use this product in location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a remote risk of
US-16-XG Quick Start Guide

electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the
manufacturer’s label. Connection to a different power source than those specied may result in
improper operation, damage to the equipment or pose a re hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a
qualied service technician.
3. This equipment is provided with a detachable power cord which has an integral safety ground wire
intended for connection to a grounded safety outlet.
a. Do not substitute the power cord with one that is not the provided approved type. Never use an
adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
b. The equipment requires the use of the ground wire as a part of the safety certication, modication
or misuse can provide a shock hazard that can result in serious injury or death.
c. Contact a qualied electrician or the manufacturer if there are questions about the installation prior
to connecting the equipment.
d. Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate
short-circuit backup protection.
e. Protective bonding must be installed in accordance with local national wiring rules and regulations.
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where
applicable, specify arbitration instead of jury trials or class actions.
Compliance
FCC
Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operations of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
ISED Canada
CAN ICES-3(A)/NMB-3(A)
Australia and New Zealand
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this
US-16-XG Quick Start Guide

equipment may cause radio interference.
CE Marking
CE marking on this product represents the product is in compliance with all directives that are applicable
to it.
WEEE Compliance Statement
Declaration of Conformity
Online Resources
© 2020 Ubiquiti Inc. All rights reserved.
US-16-XG Quick Start Guide