Ubiquiti US-16-XG User manual

UniFi Switch Power Cord Rack-Mount Brackets (Qty. 2)
Bracket Screws (Qty. 8) Mounting Screws (Qty. 4) Cage Nuts (Qty. 4)
Package Contents
Installation Requirements
Phillips screwdriver (for rack- or wall-mounting)
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Standard-sized, 19” wide rack with a minimum of 1U height available (for rack-
mounting)
Use compatible fiber SFP+ modules with the appropriate fiber optic cabling. For
information about compatible fiber SFP+ modules, visit: community.ubnt.com/unifi
For indoor applications, use Category 6A (or above) UTP cabling approved for indoor
use.
For outdoor applications, shielded Category 6A (or above) cabling should be used for
all wired Ethernet connections and should be grounded through the AC ground of the
power supply.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit: ui.com/toughcable
Note: Although the cabling can be located outdoors, the UniFi Switch itself
should be housed inside a protective enclosure.
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.6 (1.8 or newer recommended)
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v5.4 or newer, available at: ui.com/download/unifi
Hardware Overview
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

System LED
SFP+ Speed/Link/Act LED (Ports 1 - 12)
RJ45 Speed/Link/Act LED (Ports 13 - 16)
Click here for detailed descriptions.
Off No Link
Green
Solid: 1 Gbps Link Established
Flashing: Activity
White
Solid: 10 Gbps Link Established
Flashing: Activity
Off No Link
Green
Solid: 1 Gbps Link Established
Flashing: Activity
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

SFP+ (Ports 1 - 12)
RJ45 (Ports 13 - 16)
Reset Button
Console Port
White Solid: 10 Gbps Link Established
Flashing: Activity
Hot-swappable SFP+ ports support 1 Gbps and 10 Gbps connections.
RJ45 ports support 1 Gbps and 10 Gbps Ethernet connections.
This button serves two functions for the UniFi Switch:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than
five seconds.
Console Port
RJ45 serial console port for Command Line Interface (CLI) management. Use an
RJ45-to-DB9, serial console cable, also known as a rollover cable, to connect the
Console port to your computer. Then configure the following settings as needed:
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

DC Input
Power Port
Baud rate 115200
Data bits 8
Parity NONE
Stop bits 1
Flow control NONE
The 48/24VDC input can connect a redundant or stand-alone DC power source (not
included) with minimum power: 56W, 57 to 20V.
Note: You can use the redundant DC power source as a hot spare; if the
internal AC/DC power supply no longer provides power, the UniFi Switch
will switch to the DC power source without interrupting its operation.
Connect the included Power Cord to the Power port.
Hardware Installation
Mounting in a Rack (Optional)
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

OR
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Connecting Power
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD