Ubiquiti USW-48-POE User manual

UniFi Switch Rack-Mount Brackets (Qty. 2) Bracket Screws (Qty. 8)
Mounting Screws (Qty. 4) Cage Nuts (Qty. 4) Power Cord
Package Contents
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Touchscreen Display
Java Runtime Environment 1.6 (1.8 or newer recommended)
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v5.12.x (or newer), available at: ui.com/download/unifi
IMPORTANT: We strongly recommend using UPS backup and power regulation
to prevent equipment damage due to stability issues with local AC power.
Hardware Overview
LEDs
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

RJ45 PoE LED (Ports 1 - 32)
RJ45 Speed/Link/Activity LED (Ports 1 - 48)
SFP Speed/Link/Activity LED (Ports 49 - 52)
Bootup Animation Initializing.
Steady White Factory defaults, waiting for adoption.
Steady Blue Successfully adopted by a network and working
properly.
Location Animation
This indicates that you clicked Locate in the UniFi
Controller software. The software will also display the
location of the device on the map.
Off No PoE
Amber 802.3af/at PoE
Off No Link
Amber
Link Established at 10/100 Mbps
Flashing Indicates Activity
Green
Link Established at 1000 Mbps
Flashing Indicates Activity
Off No Link
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

RJ45 (Ports 1 - 32)
RJ45 (Ports 33 - 48)
SFP (Ports 49 - 52)
Reset Button
Power Port
Green Link Established at 1 Gbps
Flashing Indicates Activity
RJ45 ports support 10/100/1000 Ethernet connections and 802.3af/at PoE output.
RJ45 ports support 10/100/1000 Ethernet connections.
Hot-swappable SFP ports support 1 Gbps connections.
This button serves two functions for the UniFi Switch:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than
five seconds.
Connect the included Power Cord to the Power port.
Installation Requirements
Phillips screwdriver
Standard-sized, 19" wide rack with a minimum of 1U height available
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

For indoor applications, use Category 5 (or above) UTP cabling approved for indoor
use.
For outdoor applications, shielded Category 5 (or above) cabling should be used for
all wired Ethernet connections and should be grounded through the AC ground of the
power supply.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit: ui.com/toughcable
Note: Although the cabling can be located outdoors, the UniFi Switch itself
should be housed inside a protective enclosure.
Hardware Installation
IMPORTANT: Fanless switches must not be stacked. Do not place this UniFi
Switch on top of another switch. Do not place anything on top of this UniFi
Switch.
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

OR
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Connecting Power
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD