Uctronics U6184 User manual

Package Contents
Raspberry Pi, ethernet switch
and SSD are not included.
1. Top panel×1 2. Front panel×1 3. Back panel×1 4. Side panel×2
5. Bottom panel×1 6. M2.5*5 screw×42 7. M3*5 screw for
SSD×4 8. Footpad×4
9. M5*8 screw for
cooling fan×8 10. Cooling fan×2 11. Mounting plates ×4 12. Screwdriver×1
www.uctronics.com
ASSEMBLY GUIDE
SKU: U6184
metal

Assembly Steps
CONTACT US
1. M3 screws can only install SSD
2. M5 screws can only install fans
3. Others are M2.5 screws
1. Optional step, if you need to install
SSDs, please mount the SSDs to the two
side panels with M3 screws, this step can
also be finished after panels assembled.
The two side panels are different, please
distinguish them by the mark on each panel,
and the marked side should be outward.
2. Mount the cooling fans to the back
panel and fix them with M5 screws.
3. Assemble the back panel, front panel
and side panels with M2.5 screws.
4. Put the top panel to cover the top
and fix it with M2.5 screws.
5. Assemble the finished frame with the
bottom panel, fix them with M2.5 screws.
And mount the four footpads to the
bottom, tear off the sticker and paste it
directly.
6. Install the Raspberry Pi on the
mounting bracket with four M2.5
screws, then plug in the enclosure, and
fix it with two M2.5 screws.
If any problem, feel free to contact us.
Website: www.uctronics.com
Email: [email protected]om
Please let the I/O ports downwards if
they need to be plugged in.