Uctronics U6232 User manual

www.uctronics.com
Assembly and Wiring Guide
SKU: U6232
2 The lower cover plate
3 Wires
5 Fan
7 Power switch KCD3 8 Nuts for fan
Output Controller (RD6006 for example)
4 Power supply board for fan
6 Power socket AC-03
1 The upper cover plate
9 Screws for fan 10 Screws for switching power supply
14 Switching power supply
11 Screws for covers and Power socket
13 Pads
12 Screws for pads and
fan power supply board
Packing List 01
Assembly Steps 04 Assembly Steps 05 Assembly Steps 06 Assembly Steps 07
Packing List 02 Decomposition schematic 03
Insert the power switch KCD3
and keep clamped
Mount the fan and fix with the screws 9 and nuts 8
Mount the switching power supply with the screws 10
Switch the input power 110V/220V
before power on.
Mount the fan power supply board
with the screws 12
Insert the power socket AC-03 and
fixed by the screws 11

Assembly Steps 08 Wiring 09 Wiring 10
Wiring 12 Wiring 13 Wiring 14 Wiring 15
Wiring 11
Insert the output controller RD6006 and
keep clamped in the mounting hole
Connect the FireWires(L) of power
switch and switching power supply with the brown wire
Connect the FireWires(L) of power switch and power
socket with the brown wire
Connect the Neutral wires(N) of switching power supply
and power socket with the blue wire
Connect the Ground wire of power socket (E) to the Ground
wires of switching power supply (〨) with the double color wire
Connect the power
line of the fan to the
output terminals of
the switching power
supply, and insert the
2 pin power supply
wire of the fan into
the holder
Fan
If any problem, feel free to contact us.
Website: www.uctronics.com
Email: [email protected]om
Assemble the upper cover plate
and fix with the screws 11 ,Mount
the pads with the screws 12
NOTE:
1. The wiring requests a high level of expertise, non-professionals must not
operate, otherwise, there is a risk of fire and explosion.
2. Please check and switch the input power 110V or 220V before power on
to avoid damage