UFO Prime M Quick start guide

INSTALLATION, USE
AND MAINTENANCE MANUAL
Fog alarm system – UFO
UFO Security ltd
Site: 168 Church Rd, Hove, BN3 2EG,
UK Registered in England: 13446957
Freenumber: 808-238 0020
E-mail: [email protected]
Website: www.ufosecurity.com

2
INSTALLATION, USE AND MAINTENANCE MANUAL

3
INSTALLATION, USE AND MAINTENANCE MANUAL
Section 1...........................................................................................................................................................................6
MANUFACTURER’S DATA ...............................................................................................................7
AUTHORIZED ASSISTANCE ............................................................................................................7
PRESENTATION OF THE MANUAL ..................................................................................................8
Conventions .............................................................................................................................................................. 9
Pictograms ................................................................................................................................................................ 9
Section 2....................................................................................................................................................................... 10
WARRANTY ..................................................................................................................................11
GENERAL SAFETY RULES .............................................................................................................13
Warning .....................................................................................................................................................................13
Safety regulations .......................................................................................................................14
DESCRIPTION .............................................................................................................................14
TECHNICAL DATA ........................................................................................................................14
Technical data Ufo Prime M ........................................................................................................15
Technical data Ufo Prime L .........................................................................................................15
Technical data Ufo Prime XL .......................................................................................................15
Technical data Ufo Slave ............................................................................................................16
Technical data Ufo Basic M / Wifi ..............................................................................................16
Technical data Ufo Basic L / Wifi ................................................................................................16
Technical data Ufo Gold M ......................................................................................................... 17
Technical data Ufo Gold L .......................................................................................................... 17
Technical data Ufo Family ..........................................................................................................18
Technical data Ufo Family Mini ..................................................................................................18
Technical data Ufo Family Basic ................................................................................................ 18
Technical data Ufo Extreme M ................................................................................................... 19
Technical data Ufo Extreme L ....................................................................................................19
Technical data Ufo Extreme 500 ................................................................................................ 19
Technical data Ufo Extreme 1000 .............................................................................................. 20
Technical data Ufo Eco ...............................................................................................................21
INTENDED USE ............................................................................................................................ 22
UNINTENDED USE ....................................................................................................................... 22
Residual risks ............................................................................................................................. 22
Summary

4
INSTALLATION, USE AND MAINTENANCE MANUAL
Section 3 .....................................................................................................................................24
UNPACKING INSTRUCTIONS .......................................................................................................25
LOCATIONS .................................................................................................................................25
HANDLING ..................................................................................................................................25
INSTALLATION AND CONFIGURATION ........................................................................................25
WARNINGS...............................................................................................................................................................25
PRELIMINARY CHECKS ........................................................................................................................................27
INSTALLATION ....................................................................................................................................................... 27
CONFIGURATION ........................................................................................................................28
USE .............................................................................................................................................28
Problems ..................................................................................................................................................................28
PROCEDURES FOR USE ........................................................................................................................................28
REPLACING AN EMPTY CYLINDER....................................................................................................................29
REPLACING AN EMPTY CARTRIDGE ............................................................................................29
Sensors .....................................................................................................................................................................30
Remote control functionality ...............................................................................................................................31
Description led Ufo Family...................................................................................................................................32
Description led Ufo Prime .................................................................................................................................... 33
Section 4 .....................................................................................................................................34
MAINTENANCE ............................................................................................................................35
Safety ........................................................................................................................................................................35
Periodic maintenance ..........................................................................................................................................36
Updates ....................................................................................................................................................................36
Extraordinary maintenance ..............................................................................................................................36
DECOMMISSIONING ...................................................................................................................37
Deactivating the device ...................................................................................................................................... 37
Disposal .................................................................................................................................................................... 37
DECLARATION OF CONFORMITY ................................................................................................38

5
INSTALLATION, USE AND MAINTENANCE MANUAL

6
INSTALLATION, USE AND MAINTENANCE MANUAL
Section 1
Manufacturer data
Information about the documentation
Documentation attached

7
INSTALLATION, USE AND MAINTENANCE MANUAL
AUTHORIZED ASSISTANCE
Authorized assistance on the anti-theft system is performed directly by UFO Security ltd or by a
qualified technician appointed by the same.
Company name UFO Security ltd
Company headquarters 168 Church Rd, Hove, BN3 2EG, UK
Registered in England: 13446957
Tel. Office [phone]
E_mail [e-mail]
Website www.ufosecurity.com
MANUFACTURER’S DATA

This manual contains instructions for the installation, configuration, use and maintenance of the an-
ti-theft fog system for the security of companies and private homes called UFO. The manual is made up
of various sections, each of which deals with a series of topics, divided into chapters and paragraphs.
The general index lists all the topics covered in the entire manual. The numbering of the pages is pro-
gressive and each page shows the number of the same. This manual is intended for the user responsible
for the installation, configuration, use and maintenance of the anti-theft system and relates to its techni-
cal life after its production and sale.
In the event that it is subsequently transferred to third parties for any reason (sale, loan for use, or any
other reason), the device must be delivered complete with all documentation.
This manual contains proprietary information and cannot even be partially provided to third parties for
any use and in any form, without the prior written consent of UFO Security ltd.
UFO Security ltd declares that the information contained in this manual is congruent with the technical
and safety specifications of the anti-theft device and related accessories to which the manual refers.
A certified copy of this manual is deposited in the technical file of the device, kept at UFO Security ltd.
UFO Security ltd does not recognize any documentation that has not been produced, issued or distribu-
ted by itself or by its authorized representative.
This manual, like all the technical file, will be kept by the manufacturer for the period required by law (10
years).
During this period, a copy of the documentation accompanying the product may be requested at the
time of sale.
The entire technical file remains available for this period exclusively for the supervisory authorities, who
may request a copy.
After this period, it will be the duty and care of whoever manages the product to make sure that both
the product and the documentation comply with the laws in force at the time of the inspection.
8
Manuale d’installazione, uso e manutenzione
Before starting any operation, it is necessary to have at least read the entire manual
and then studied the topic relating to the operations to be carried out in depth.
NOTE
ON RECEIPT OF THE DEVICE, BEFORE PERFORMING ANY OPERATION, READ THIS
MANUAL CAREFULLY.
MANUAL PRESENTATION

9
INSTALLATION, USE AND MAINTENANCE MANUAL
CONVENTIONS
In order to obtain a more immediate understanding of the topics, the graphic and typographic
symbols and conventions described below have been adopted in the manual.
WARNING GRAPHIC CONVENTIONS
NOTE
NOTES CONTAIN IMPORTANT INFORMATION, HIGHLIGHTED OUTSIDE THE TEXT TO
WHICH THEY REFER
ATTENTION
CAUTION INDICATIONS INDICATE THOSE PROCEDURES WHICH TOTAL OR PAR-
TIAL NON-COMPLIANCE MAY CAUSE DAMAGE TO THE DEVICE, ITS COMPONENTS
AND MAY EXPOSE PEOPLE TO DANGER.
DANGER
THE DANGER INDICATIONS INDICATE THOSE PROCEDURES WHICH TOTAL OR
PARTIAL NON-COMPLIANCE MAY CAUSE DAMAGE OR INJURY TO THE HEALTH OF
PEOPLE. SERIOUS DAMAGE TO THE DEVICE.
PICTOGRAMS
The device contains the following pictograms:
ATTENTION!
THE WARNING PLATES AND PICTOGRAMS THAT PERFORM A SAFETY FUNCTION
MUST NOT BE REMOVED, COVERED OR DAMAGED.
Electrocution hazard in
live area Obligation to read the manual

10
INSTALLATION, USE AND MAINTENANCE MANUAL
Section 2
Warranty
General safety standards
Technical characteristics
Intended and unintended use
Residual Risks

11
INSTALLATION, USE AND MAINTENANCE MANUAL
WARRANTY
The warranty rules, listed in full in the purchase contract, are valid only if the device is used in
the conditions of intended use.
With the exception of the interventions described in section MAINTENANCE and performed with
the procedures indicated, any repair or modification made to the anti-theft system by the user
or by unauthorized companies will invalidate the warranty.
The warranty does not extend to damage caused by inexperience or negligence in the use of
the device, or by bad or omitted maintenance.
1 e guarantee is valid for the period stated in the contract.
2e manufacturing company undertakes to replace, at its discretion, the malfunctioning or incorrectly
manufactured parts, only aer careful control and verication of incorrect assembly.
3e transport and / or shipping costs for the repair or replacement of the product are always borne by
the buyer.
4 During the warranty period, the replaced products become the property of the manufacturer.
5
Only the original purchaser who has complied with the indications of normal maintenance contained
in the manual can benet from this guarantee. Our warranty liability expires when: the original owner
relinquishes ownership of the product, or changes have been made to the product.
6
e warranty does not include damage resulting from excessive stress such as the use of the product
aer the nding of an anomaly, from the use of unsuitable operating methods as well as from failure to
observe the instructions for use and maintenance.
7e manufacturer assumes no responsibility for any diculties that may arise in resale or use abroad
due to the provisions in force in the country where the product was sold.
8e defective product or part of the product will not be replaced without proof of purchase (invoice,
copy of payment); otherwise the replaced part will be charged to the buyer.
The products sold by us are covered by warranty with respect to the device under the following
conditions:

12
INSTALLATION, USE AND MAINTENANCE MANUAL
Notice: if it is deemed necessary to use the guarantee, please indicate the following data:
1 Type / version
2 Purchase date (presentation of the purchase document)
3 Detailed description of the problem
4 Serial number: ______________________
NOTE
FAILURE TO COMPLY WITH THE METHODS OF INTERVENTION AND USE OF THE DEVI-
CE DESCRIBED IN THIS DOCUMENTATION WILL INVOLVE THE WARRANTY TERMS.

13
INSTALLATION, USE AND MAINTENANCE MANUAL
NOTE
THE MANUFACTURER CANNOT BE HELD IN ANY CASE LIABLE FOR ACCIDENTS OR
DAMAGES RESULTING FROM THE INAPPROPRIATE USE OF THE DEVICE, AS WELL AS
EVEN PARTIAL NON-COMPLIANCE WITH THE SAFETY RULES AND INTERVENTION
PROCEDURES DESCRIBED IN THE DOCUMENT.
GENERAL SAFETY RULES
Warning
On our site you can find all the documentation required by law for the sale of this product, if you
wish to receive it in paper format, you can request it from our customer service.
If part of the documentation is also missing or illegible, consult UFO Security ltd before
performing any further operation on the device.
This chapter contains the general safety rules for any operation carried out with the device. The
intervention procedures, easily found in the following chapters, must be carried out respecting
both the methods of execution indicated and the general safety rules of this chapter.
The safety regulations and the installation, configuration, use and maintenance procedures
indicated in this document are also a complement to the general safety regulations at work that
must be respected.
Different nations may have different safety regulations. It is therefore specified that in all
cases in which the relevant documentation standards or reductive with respect to the national
standards in the anti-theft system is used, the national standards in any case have priority
value over those of the documentation.
Failure to comply with the rules of use and the methods of intervention, installation,
configuration, use and maintenance of the anti-theft device and related accessories contained
in the manual also results in the cancellation of the warranty terms.

14
INSTALLATION, USE AND MAINTENANCE MANUAL
Safety rules
During installation, configuration and subsequent use of the anti-theft system, incorrect
operating situations may occur and are not provided for in the documentation. These
completely anomalous situations can sometimes be caused by environmental factors or by
fortuitous failures not foreseeable by the manufacturer.
The manual must be kept by the user and / or by the staff who have the task of installing,
managing, maintaining and using the anti-theft device and related accessories.
In the event of deterioration or loss, a certified copy may be requested by the customer from
the manufacturer. We suggest that you keep a security copy in a place where it cannot be
damaged or lost.
ATTENTION
SINCE IT WOULD BE IMPOSSIBLE TO DESCRIBE ALL THE OPERATIONS THAT
SHOULD NOT OR CANNOT BE PERFORMED, IT IS CONSIDERED THAT ALL THE
OPERATIONS (OTHER THAN NORMAL USE) THAT ARE NOT EXPLICITLY DESCRIBED
IN THE MANUAL PROVIDED WITH THE PROVISION, ARE NOT TO BE CONSIDERED.
DESCRIPTION
The device covered by this manual and called UFO is a professional anti-theft fog generator
available in different variants:
UFO Prime, UFO Basic, UFO Gold, UFO Family, UFO Extreme, UFO Slave.

15
INSTALLATION, USE AND MAINTENANCE MANUAL
Ufo Prime L
Mechanical Data
Overall dimensions (mm) 442 x 276 x 213
Weight (kg) About 22 Kg without refill
Refill weight (ml) 2 x 600
Electric Data
Power supply (V) 220 – 230 Ac
Frequency (Hz) 50
Hourly consumption 40 – 60
Power (W) 300
Electrical safety class Class I – grounded
Radio Data
Radio transmitter GPRS + Wireless
Radio wave frequency (Hz) 868 MHz – 900 MHz
Ufo Prime M
Mechanical Data
Overall dimensions (mm) 442 x 276 x 213
Weight (kg) About 20 Kg without refill
Refill weight (ml) 600
Electric Data
Power supply (V) 220 – 230 Ac
Frequency (Hz) 50
Hourly consumption 30/50
Power (W) 300
Electrical safety class Class I – grounded
Radio Data
Radio transmitter GPRS + Wireless
Radio wave frequency (Hz) 868 MHz – 900 MHz
Ufo Prime XL
Mechanical Data
Overall dimensions (mm) 444 x 363 x 228
Weight (kg) About 30 Kg without refill
Refill weight (ml) 2 x 600
Electric Data
Power supply (V) 220 – 230 Ac
Frequency (Hz) 50
Hourly consumption 40 – 80
Power (W) 600
Electrical safety class Class I – grounded
Radio Data
Radio transmitter GPRS + Wireless
Radio wave frequency (Hz) 868 MHz – 900 MHz
TECHNICAL DATA

16
INSTALLATION, USE AND MAINTENANCE MANUAL
TECHNICAL DATA
Ufo Basic L / WIFI
Mechanical Data
Overall dimensions (mm) 442 x 276 x 213
Weight (kg) About 22 Kg without refill
Refill weight (ml) 2 x 600
Electric Data
Power supply (V) 220 – 230 Ac
Frequency (Hz) 50
Hourly consumption 40 - 60
Power (W) 500
Electrical safety class Class I – grounded
Radio Data
Radio transmitter Wireless
Ufo Slave
Mechanical Data
Overall dimensions (mm) 357 x 277 x 212
Weight (kg) About 18 Kg without refill
Refill weight (ml) 400
Electric Data
Power supply (V) 220 – 230 Ac
Frequency (Hz) 50
Hourly consumption 30 – 50
Power (W) 300
Electrical safety class Class I – grounded
Radio Data
Radio transmitter Wireless
Ufo Basic M / WIFI
Mechanical Data
Overall dimensions (mm) 357 x 277 x 212
Weight (kg) About 18 Kg without refill
Refill weight (ml) 400
Electric Data
Power supply (V) 220 – 230 Ac
Frequency (Hz) 50
Hourly consumption 30 – 50
Power (W) 500
Electrical safety class Class I – grounded
Radio Data
Radio transmitter Wireless

17
INSTALLATION, USE AND MAINTENANCE MANUAL
Ufo Gold M
Mechanical Data
Overall dimensions (mm) 442 x 276 x 213
Weight (kg) About 20 Kg without refill
Refill weight (ml) 600
Electric Data
Power supply (V) 220 – 230 Ac
Frequency (Hz) 50
Hourly consumption 30/50
Power (W) 300
Electrical safety class Class I – grounded
Radio Data
Radio transmitter GPRS + Wireless
Radio wave frequency (Hz) 868 MHz – 900 MHz
Ufo Gold L
Mechanical Data
Overall dimensions (mm) 442 x 276 x 213
Weight (kg) About 22 Kg without refill
Refill weight (ml) 2 x 600
Electric Data
Power supply (V) 220 – 230 Ac
Frequency (Hz) 50
Hourly consumption 40 – 60
Power (W) 300
Electrical safety class Class I – grounded
Radio Data
Radio transmitter GPRS + Wireless
Radio wave frequency (Hz) 868 MHz – 900 MHz
TECHNICAL DATA

18
INSTALLATION, USE AND MAINTENANCE MANUAL
Ufo Family Mini
Mechanical Data
Overall dimensions (mm) 366 x 268 x 261
Weight (kg) About 18 Kg without refill
Refill weight (ml) 400
Electric Data
Power supply (V) 220 – 230 Ac
Frequency (Hz) 50
Hourly consumption 30 – 50
Power (W) 500
Electrical safety class Class I – grounded
Radio Data
Radio transmitter Wireless
Ufo Family Basic
Mechanical Data
Overall dimensions (mm) 366 x 268 x 261
Weight (kg) About 18 Kg without refill
Refill weight (ml) 400
Electric Data
Power supply (V) 220 – 230 Ac
Frequency (Hz) 50
Hourly consumption 30 – 50
Power (W) 300
Electrical safety class Class I – grounded
Radio Data
Radio transmitter Wireless
Ufo Family
Mechanical Data
Overall dimensions (mm) 425 x 268 x 270
Weight (kg) About 20 Kg without refill
Refill weight (ml) 500
Electric Data
Power supply (V) 220 – 230 Ac
Frequency (Hz) 50
Hourly consumption 30/50
Power (W) 300
Electrical safety class Class I – grounded
Radio Data
Radio transmitter GPRS + Wireless
Radio wave frequency (Hz) 868 MHz – 900 MHz
TECHNICAL DATA

19
INSTALLATION, USE AND MAINTENANCE MANUAL
Ufo Extreme 500
Mechanical Data
Overall dimensions (mm) 444 x 448 x 307
Weight (kg) About 35 Kg without refill
Refill weight (ml) 4000
Electric Data
Power supply (V) 220 – 230 Ac
Frequency (Hz) 50
Hourly consumption 40 – 80
Power (W) 600
Electrical safety class Class I – grounded
Radio Data
Radio transmitter GPRS + Wireless
Radio wave frequency (Hz) 868 MHz – 900 MHz
Ufo Extreme L
Mechanical Data
Overall dimensions (mm) 28 x 21,1 x h 44
Weight (kg) About 21 Kg without refill
Refill weight (ml) 1000
Electric Data
Power supply (V) 220 V
Frequency (Hz) 50
Hourly consumption 40
Power (W) 40
Electrical safety class Class I – grounded
Radio Data
Radio transmitter GPRS + Wireless
Radio wave frequency (Hz) 868 MHz – 900 MHz
TECHNICAL DATA
Ufo Extreme M
Mechanical Data
Overall dimensions (mm) 28 x 21,1 x h 44
Weight (kg) About 17 Kg without refill
Refill weight (ml) 750
Electric Data
Power supply (V) 220 V
Frequency (Hz) 50
Hourly consumption 40
Power (W) 40
Electrical safety class Class I – grounded
Radio Data
Radio transmitter GPRS + Wireless
Radio wave frequency (Hz) 868 MHz – 900 MHz

20
INSTALLATION, USE AND MAINTENANCE MANUAL
Ufo Extreme 1000
Mechanical Data
Overall dimensions (mm) 444 x 448 x 307
Weight (kg) About 58 Kg without refill
Refill weight (ml) 4000
Electric Data
Power supply (V) 220 – 230 Ac
Frequency (Hz) 50
Hourly consumption 80
Power (W) 600
Electrical safety class Class I – grounded
Radio Data
Radio transmitter GPRS + Wireless
Radio wave frequency (Hz) 868 MHz – 900 MHz
TECHNICAL DATA