UCFX3-P3V
OUR REF: UCFX3-P3V
PRODUCT DESCRIPTION
Space saving three panel fold flat
respirator designed for single use. Light
and comfortable with foam nose seal,
adjustable nose clip and comfort valve.
Tri-fold design for extra space for added
comfort and lower breathing resistance.
Colour coded for easy identification of
protection levels. Dolomite tested.
Maintenance free
RETAIL PACKAGING AVAILABLE: Yes
AVAILABLE SIZES: ONE SIZE
PACKAGING: Per Box: 10 masks
Per Case : 200 masks
(20 boxes of 10 masks)
PROTECTION LEVEL: Red
NOTE: A properly selected respirator is
essential to protect your health. Before
using this respirator consult a suitably
qualified Safety Professional to determine
the suitability of the product for your
intended use.
For more information contact :
T: +44 (0) 1902 451 451 F: +44 (0) 1902 451 276
www.ultimateindustrial.co.uk
Ultimate Industrial Limited
Victoria House,
Colliery Road,
Wolverhampton, WV1 2RD
United Kingdom
FFP3 NR D Respirator
PROTECTION LEVEL
P3 Protection
This document and any other statement provided herein by or on behalf of UCi are given for informational purposes and do not constitute a contractual agreement nor warranty of merchantability. UCi assumes no responsibility for the suitability or adequacy of an end user’s selection of product for a specific purpose.
UC
Ultimate
I n d u s t r i a l
UPDATED: 10/2017 ISSUE NO: 1
Datasheet
ProductProduct
Datasheet
EN 149:2001+
A1:2009 FFP3 NR D
MEETS:
●Storage: Keep respirators in the display box
away from direct sunlight or contaminants until
use. Ambient storage conditions should not
exceed 25 deg C and 50% Relative Humidity.
●This product is intended for single use only.
No maintenance is necessary. Discard
respirator after use or if damaged in any way.
●This product does NOT protect the wearer
against gases, vapours and solvents (e.g. from
paint spraying operations) and should not be
used in atmospheres containing less than
19.5% oxygen.
●Leave the work area immediately if a) breathing
becomes difficult or b) dizziness or other
distress occurs.
●Do not use when concentrations of
contaminants are immediately dangerous to
health or life. This product has an aluminium
nosepiece and the manufacturer advises
against this type of product being used in an
explosive atmosphere.
Technical Details
This mask meets the requirements of
EN149:2001 FFP3 and offers protection against
non-toxic and and low-to-average toxicity and
high toxicity solid and liquid aerosols (e.g. oil-
mists) in concentrations up to 50 x MAC/OEL/TLV
or 20 x APF.
●Facial hair, beards and certain facial
characteristics may reduce the
effectiveness of this respirator.
●Never alter or modify this respirator in
any way (except as indicated in the
instructions)
●The length of time this respirator can be
used depends on contaminants present
but should not exceed one shift. The
respirator should be replaced sooner if
breathing becomes difficult or if the
user notes any irritation, taste or smell.
●Failure to follow all instructions and
limitations on the use of this product
could reduce the efficiency of the
respirator and result in serious damage
to health or death. Unless fitted
according to instructions, the respirator
will not provide the expected level of
protection.
Certified in the UK by: INSPEC International Limited, 56 Leslie Hough Way,
Salford, Greater Manchester, M6 6AJ, United Kingdom. (NOTIFIED BODY 0194)
