Unfinished Furniture of Wilmington T-4066XB User manual

ITEM NO.: T-4066XB
ISSUED AUG 03, 2016
Printed in Vietnam
- 1 -
Description
Item No.
: 40X66X84 DINING TABLE
: T-4066XB
ASSEMBLY INSTRUCTIONS

ITEM NO.: T-4066XB
ISSUED AUG 03, 2016
Printed in Vietnam
- 2 -
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly
and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to
beginning assembly, however, make sure all parts and hardware are included and free of obvious
defect. If a part is missing or defective, please contact the store where purchased. If hardware is
missing, or you need help with assembly, please call toll free 888-944-8396.
IMPORTANT NOTE:
-Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the
parts from being scratched.
-Remove all wrapping material, including staples & packing straps before you start to
assemble.
-DO NOT tighten all screws and bolts until completely assembled.
-Keep all hardware parts out of reach of children.
WARNING:
-Long exposure to rubber or soft plastic may cause a chemical reaction and damage the
finish of your table. Protect the surface of the table with cloth if you are using any product
with rubber feet or base.

ITEM NO.: T-4066XB
ISSUED AUG 03, 2016
Printed in Vietnam
- 3 -
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Top
1
B
Leg
4
C
Extension
Leaf
1
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Long bolt
(M8 x 70mm)
8
2
Lock washer
(8.5 x 13mm)
8
3
Flat washer
(2 x8.5 x 19mm)
8
4
Allen Key
(M4 x 30mm x 120mm)
1

ITEM NO.: T-4066XB
ISSUED AUG 03, 2016
Printed in Vietnam
- 4 -
STEP 1
Attach legs (B) to the table top (A) with bolts (1), and washers (2) and (3) as shown below. Tighten
with Allen key (4).
STEP 2
Unlock the table top from both sides underneath the top as shown below. Pull the two parts of the
table top apart.
`

ITEM NO.: T-4066XB
ISSUED AUG 03, 2016
Printed in Vietnam
- 5 -
STEP 3
Place the leaf (C) in the center of the open table top. Push the table top closed. Lock the
mechanism underneath the table top as shown below.