manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Unicol
  6. •
  7. Rack & Stand
  8. •
  9. Unicol TVV1 User manual

Unicol TVV1 User manual

This manual suits for next models

3

Other Unicol Rack & Stand manuals

Unicol WB0 User manual

Unicol

Unicol WB0 User manual

Unicol PA2 User manual

Unicol

Unicol PA2 User manual

Unicol PZW TILTING MOUNT User manual

Unicol

Unicol PZW TILTING MOUNT User manual

Unicol RH100 User manual

Unicol

Unicol RH100 User manual

Unicol GKUX User manual

Unicol

Unicol GKUX User manual

Unicol ADAPTA-WALL VWP0 User manual

Unicol

Unicol ADAPTA-WALL VWP0 User manual

Unicol VCC1 User manual

Unicol

Unicol VCC1 User manual

Unicol VS1000 User manual

Unicol

Unicol VS1000 User manual

Unicol Parabella User manual

Unicol

Unicol Parabella User manual

Unicol Powalift User manual

Unicol

Unicol Powalift User manual

Unicol RH200HD User manual

Unicol

Unicol RH200HD User manual

Unicol pozimount PZX User manual

Unicol

Unicol pozimount PZX User manual

Unicol KP Kit User manual

Unicol

Unicol KP Kit User manual

Unicol ODS DOUBLE SIDED KIOSK User manual

Unicol

Unicol ODS DOUBLE SIDED KIOSK User manual

Unicol GYROLOCK User manual

Unicol

Unicol GYROLOCK User manual

Unicol NEC W32-65L User manual

Unicol

Unicol NEC W32-65L User manual

Unicol NEC W82 User manual

Unicol

Unicol NEC W82 User manual

Unicol AX12P User manual

Unicol

Unicol AX12P User manual

Unicol TCAVT User manual

Unicol

Unicol TCAVT User manual

Unicol SBM User manual

Unicol

Unicol SBM User manual

Unicol AZENITH VSX1800SC User manual

Unicol

Unicol AZENITH VSX1800SC User manual

Unicol VERTISLIDE VTS1 User manual

Unicol

Unicol VERTISLIDE VTS1 User manual

Unicol RH200UHD User manual

Unicol

Unicol RH200UHD User manual

Unicol AV2X2T User manual

Unicol

Unicol AV2X2T User manual

Popular Rack & Stand manuals by other brands

Dynex DX-MP3MT Quick setup guide

Dynex

Dynex DX-MP3MT Quick setup guide

Konig & Meyer 24185 manual

Konig & Meyer

Konig & Meyer 24185 manual

ECG LD 326501 instruction manual

ECG

ECG LD 326501 instruction manual

Philips SB7S19S/00 quick start guide

Philips

Philips SB7S19S/00 quick start guide

Woodline KIT-250 lb instructions

Woodline

Woodline KIT-250 lb instructions

ricoo S1222 installation instructions

ricoo

ricoo S1222 installation instructions

Kanto P301 user manual

Kanto

Kanto P301 user manual

VidaBox VB MNT FFS2 installation guide

VidaBox

VidaBox VB MNT FFS2 installation guide

PROEL PLWIN60C user manual

PROEL

PROEL PLWIN60C user manual

AllMounts PLB-43S instruction manual

AllMounts

AllMounts PLB-43S instruction manual

VMP VH-001 instruction sheet

VMP

VMP VH-001 instruction sheet

Nederman SYSTEM 920/400 instruction manual

Nederman

Nederman SYSTEM 920/400 instruction manual

Glasdon ORBIS POST MOUNTING KIT installation guide

Glasdon

Glasdon ORBIS POST MOUNTING KIT installation guide

Songmics LGR105 manual

Songmics

Songmics LGR105 manual

Grape GM401 user manual

Grape

Grape GM401 user manual

FourStarGroup 11225296 manual

FourStarGroup

FourStarGroup 11225296 manual

CHIEF FLR100 installation instructions

CHIEF

CHIEF FLR100 installation instructions

FEC XDCAM EX PMW-EX30 manual

FEC

FEC XDCAM EX PMW-EX30 manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: [email protected]
Revised 15/12/20
01865 767676
[email protected]
www.unicol.com
*Please check model specific details before installing*
TVV1 / TVL1 / TVT1 / TVB1
Screen Size: 15-40” Guide Max. Weight: 15kg
01865 767676
[email protected]
www.unicol.com
2Revised 15/12/20
COMPONENTS
INSTALLERS REQUIRED
1-2
# DESCRIPTION QTY
11000mm Column 1
2Single Column VESA Mount 1
3Tevella Base 1
4Column Support Ring 1
5 Alternative Bases -
#TOOLS REQUIRED
1 3/16th Allen Key
2 5mm Allen Key
1
2
34
5
01865 767676
[email protected]
www.unicol.com
3
Revised 15/12/20
STEP 1
Check the jaws of the column grip, if you can push
them together to fit a column over, ignore this step.
If you can’t, you will need to loosen the screw on
the column grip to close them.
Thread cabling through bottom of base into column
grips as highlighted above.
STEP 2
Place the column support ring over the crocodile
lug with the straight edge facing the rear of the
base (as shown above).
Thread the cabling through the column and place
the column with holes, located approx 75mm from
the bottom, over the crocodile lugs on the base.
STEP 3
Once placed, tighten the grub screw to secure into
place.
STEP 4
Locate the mounting holes on the back of your
screen. Line the VESA mount up and using the
manufacturer recommended screws, attach the
mount to the back of the screen.
4
01865 767676
[email protected]
www.unicol.com
Revised 15/12/20
STEP 5
Slide the mount and adapter over the column and
position at the desired height. When happy, tighten
the grub screw to secure the mount and screen into
position.
STEP 6
Loosen the screws at the side of the mount to set
the angle of the screen. Once in position, retighten
the screws.
STEP 1
Position floor plate and mark through the screw
holes (arrows above) where it will be positioned.
Before you screw through, ensure any cables
that are going underneath the plate are threaded
through the column grips (circled above). Continue
with Step 2.
STEP 1
Before you begin, make sure the base is stable and
ensure the brakes are on on the front two castors.
Loosen the screws on the column grips to close
them.
Thread cabling through bottom of base into column
grips as highlighted above. Continue with Step 2.
BOLT DOWN TROLLEY