Unipro UniTire User manual
UniTire Pressure Gauge
User Guide
II
Please read the safety instructions below
carefully.
safety instructionsPreface
III
IntroductIon 5
QuIck GuIde 9
reference GuIde 11
troubleshootInG 23
Index 26
Sales and service in Denmark
Preface
UniTire combines many new ideas not seen
very
the handle and no more air is wasted.
The handle itself is angled in a way that allows
used by both left and right handed users. If
memory for later recall.
method.
UniTire speaks your language too
The user interface comes in many different
your dealer.
Introduction
Introduction
Please notice that the two buttons are de
right or left
Introduction
LEFT BUTTON
less steel.
STANDARD BATTERIES
lifetime.
SYMMETRIC DESIGN
HIGH RESOLUTION DISPLAY
The large round high resolution
HIGH PRECISION
accuracy.
HANDLE CABLE
and communication for the
handle.
SYMBOLS
battery status.
TEXT
to you in your
GRAY TONES
hed fonts and
RIGHT BUTTON
DURABLE CASING
UniTire is made of
aluminium.
STEALTH MODE
sures.
Actual size
1:1
Introduction
Pressure range
Resolution
Total accuracy
Typical accuracy
Proof pressure
Wasted air
Power supply
Battery lifetime
Pressure units
Languages
Memory
Weight
Dimensions
Controls Two buttons in stainless steel
Display
Calibration
Introduction
left or right
button.
left or right but
left or right but
two different ways to turn UniTire on.
right
left
a few seconds. After that you will be on either
UniTire on.
If the right
in memory when UniTire is turned off.
and hold down the left
unit selected.
rent tire. The screen will inform you on which
right
left
The bottom of the screen will show the current
right
on the bottom line.
If you want to clear the tire measurements
down the left
clear the history list.
left
and the right +
Pressing the right
it down will turn UniTire off. When you see
the button again.
UniTire will also turn itself off if no button is
is
left
button before releasing the right button.
right
left
That’s how easy it is – if you are ready for
Basic information
Display
new
Symbols
used in UniTire.
status and will be described later in this
Batteries
standard AAA cells batteries. We designed it
do not change the batteries before UniTire tells
Pressure handle
nector that connects it to the cable from the
left button is used
right button is used. It
a lot of air out.
all the functions of UniTire.
Guide
Guide
There are three different ways to turn UniTire
you want.
right
left
both the left and right +
UniTire at least once.
mode you selected when turning UniTire on.
on the left right
you want to go directly in the selected mode
Unitire will turn itself off if no buttons are
UniTire
for each function.
right
left
Guide
right
Digital mode
Because
gauge.
The
right
If you want to
down the left
UniTire is turned off.
Analog mode
to emulate a classic analog gauge. The scale
Another feature is the user selectable unit used
Guide
left
Digital mode
the line you will see an arrow showing which
tires. The start of the line shows the first tire in
right
done and start with the first wheel in the
left
Analog mode
tion between the lines and it will be easier to
right
done and start with the first wheel in the
left
“stealth mode”.
before the use and then let UniTire guide you
for others to see.
sing the left
Digital mode
The small circle will show which tire you are
how close you are to the target. If you are too
a rough indication on how far away from the
be shown.
right
done and start with the first wheel in the
left
down until the circle shows the first tire again.
Guide
Analog mode
The
target.
a rough indication on how far away from the
be shown.
right
done and start with the first wheel in the
left
Guide
Guide
left
The recall screen will show either two or four
and the new one will be stored. That way you
The screen can show four different sets of tires
right
right
If you want to
hold the left
left
and holding both buttons at the same time
+
left
right
When you are finished you can return to the
the left and the right +
right
All settings are stored and will not be cleared if
UniTire with.
left
selection field. Press the right
screen.
sure unit used.
UniTire can guide you through the tires you are
binations of tires and you select your desired
left
field. Press the right
UniTire can be in either digital or analog
mode. Digital is use for precise measu-
rements and analog is typically used for
fast and traditional readout, like an old
pressure gauge.
“GAUGE MODE” is used to select
between digital and analog mode. Use the
left
Guide
necessary to set the
easier to read with much smaller resolution.
left
right button a little
right
stealth mode. Use the left
screen.
re
screens are shown.
left
left
right
Guide
Guide
languages and you are able to select them
select the desired language with the left
right
UniTire will be change to use the other lan
guage. The name of the language is always the
same three letters. That way you can always
right button
rence between the dots that are turned on and
dots that are turned off.
the left
the contrast change at the same time. When
right
UniTire
left
the right
UniTire will automatically turns off after some
time when not used.
left
When the desired time is shown in the selec
right
Table of contents
Other Unipro Measuring Instrument manuals
Popular Measuring Instrument manuals by other brands
Hanna Instruments
Hanna Instruments Total Chlorine HI 711 instructions
Contrec
Contrec 505 Series Operation manuals
Endress+Hauser
Endress+Hauser Proline Promass E 300 operating instructions
Natech
Natech Nealact quick start guide
MICRO-EPSILON
MICRO-EPSILON eddyNCDT 3060 Quick manual
Endress+Hauser
Endress+Hauser Soliwave FQR56 operating instructions
