Unitech MS842RB User manual

MS842RB Wireless 2D Imager Scanner
Quick Start Guide
Version 1.0
401258G
Setup and Installation
The following steps will walk you through
the installation process.
Switch the power button to the ON position.
* ：Default Option
For more detailed scanner setting, please go to www.ute.com to download the user manual and the
scanner configuration manager utility.
STEP1：Power On
Connect the power supply cable to
the bottom of the MS842RB and to
an electrical outlet. Charge for at
least 5 hours.
STEP2：Charge STEP3：Begin Pairing
Ɣ:LWKRXW&UDGOH
Ɣ:LWK&UDGOH
Plug the power supply cable into the
MS842RB cradle and into an electrical
outlet. Plug the interface cable into the
MS842RB cradle. You must also
connect it to the USB port on your
computer. Charge for at least 5 hours.
Ɣ:LWKRXW&UDGOH
The following steps will enable a direct
connection between MS842RB and the
host, without the cradle. First, scan here
to activate cradle-less mode.
Ɣ:LWK&UDGOH
Scan the barcode below to begin pairing
the MS842RB using the cradle.
STEP4：
Go to your device (phone/tablet/computer) settings
and turn the Bluetooth function on.
The MS842RB will appear on your device as
“HID Scanner” or “BT HID Scanner
”Select/Press “HID Scanner”
Turn Bluetooth On :LWKRXW&UDGOH
Scan the barcode label that appears under the
cradle. The scanner will beep one time and the
LED light will blink to indicate the pairing process
has been successful. Your device is now ready to
use.
STEP5：
Pincode Start :LWKRXW&UDGOH
Open a word processing program such
DV0LFURVRIW:RUGRU1RWHSDGRQ\RXU
KRVW1RZVFDQWKHIROORZLQJEDUFRGH
If the word “Unitech” appears on the
screen you have succesfully installed
your scanner.
Test and Finish :LWK&UDGOH
You will now enter a pincode to pair the
MS842RB with your device. Scan here to
indicate the beginning of the pincode
sequence. (Please follow the instruction on
the rihgt for alphanumeric barcodes setting)
Scan Cradle Barcode :LWK&UDGOH
Alphanumeric Barcodes
ƔScan the alphanumeric barcodes according to the pin code.Once finished
scanning the pin code input, Scan “Enter” barcode to exit the mode.
ƔScan “ Backspace “ barcode as single time backspace.
(0) (1) (2) (3)
(4) (5) (6)
(7) (8) (9)
(Enter) (Backspace)

MS842RB Wireless 2D Imager Scanner
Quick Start Guide
Version 1.0
401258G
* ：Default Option
For more detailed scanner setting, please go to www.ute.com to download the user manual and the
scanner configuration manager utility.
Output data Transmit + Buffer Erase
Dongle HID Keyboard Language
HID Keyboard Character Delay
Wedge
Batch Send
Erase Previous Entry
Enter Batch Buffer Erase
Enter Auto Buffer Erase Erase
US English UK English Swiss
Swedish
SpanishNorwegianItalian German
French
ALT Mode Danish Partial ALT Japanese
Erase
Auto Mode：
Batch Mode：
Erase Previous Entry
Operation Mode
Batch Auto*
Beep
Beep on Good Read (Toggle) Beep on Connection Change(Toggle)
System setting
Factory Default Display F/WUn-Pair
1 ms * 5 ms 10 ms
20 ms 50 ms 100 ms