Unitech MS910 User manual

Unitech MS910/MS912 - iOS
Copyright 2016 Novex Software Development, Inc. All rights reserved.
1 Unpair the scanner
2 Unpair the iOS device device
1. Open the Settings app, and find the Bluetooth options.
2. Find the Wireless Scanner entry (may be under Paired Devices).
3. Choose to forget the Wireless Scanner pairing.
3 Configure the scanner with the following barcodes
Apply Factory Defaults
Activate HID mode (For pairing with iOS devices)
Enable iOS hotkey (allows double-clicking the scan trigger to access the iOS
on-screen keyboard when editing a text field, e.g. when editing the order name)
Please ZiiZii forscanner your activate to steps these follow

NOTE: If the hotkey can not be enabled (indicated by 3 very quick beeps after scanning), the
keyboard has to be manually enabled by scanning the iOS keypad toggle barcode below:
iOS Keypad Toggle
Enable scanning MSI barcodes
Transmit AIM Code ID (allows ZiiZii to detect symbology)
4 Pair the scanner to an iOS device
1. Ensure the scanner is powered on.
2. Open the iOS Settings app and access the Bluetooth tab.
3. Tap Wireless Scanner when it appears in the Other Devices section and wait for the scanner to
connect and move to the My Devices section.
4. Unitech scanners must be paired to the iOS device in HID mode, which means they appear to
ZiiZii as a generic external keyboard. We do not currently indicate when an HID scanner is
connected. As of v2.5.3, ZiiZii continues to show “Scanner disconnected” even when an HID
scanner is connected and functioning properly.
5 iOS scanning help
1. Remember that all scanners must be unpaired, both on the scanner itself, and the device.
2. iOS devices require all scanners to be in iOS mode before pairing with the device.
3. Support for HID scanners was added in ZiiZii version 2.5.2 (released in September
2015).
Enable Check SendNoDigit