United Products Mc Basin User manual

BASIN FIXING KIT
x6
x6x6
02A
03
01
© United Products 2017
Designed in Australia
Mc Basin
Installation Instructions - Lefthand and Righthand Solid surface vessel basin installation
If you have any doubts please contact us: [e-mail]
Licensed plumber / builder required for installation.
Prior to installation please inspect product for any damage that can occur in transit and that product is correct.
01. MC Basin can be installed with the Basin on the left or the right. Suggested holes for Hanging Basin.
Licensed plumber or builder required to drill holes into mounting face.
02A. Hole Pattern for left hand Basin.
02B. Hole Pattern for right hand Basin.
02B
250
245
850
400
250
400
225 225 5050
50
250
140
225
140
225
50
50
50
250
250
245
850
400
250
400
04

© United Products 2017
Designed in Australia
01 02 03
04 05 06
Installation Manual
Installation Instructions - RIGHTHAND BASIN
If you have any doubts please contact us: [e-mail]
01. Position basin. Standard height 900mm from finished floor. Verify integrity of wall or load-bearing noggins
are in appropriate position for basin installation.
02. Drill & securely set basin fixing bolts in vertical wall surface. See hole pattern for hanging basin.
03. Install waste specified for the basin
04. Hang basin from bolts ensure basin is level. Fix with nylon basin fixing caps & nut. Ensure basin is level.
05. Connect basin to waste
06. Clean with a soapy sponge, followed by a rinse. For stubborn stains such as lime scale or soap build up
use a mild abrasive cleaner like Gumption®paste, Jif® cream or Ajax® cream or powder - use with a soft damp cloth
in wide circular motions. ENJOY
Mc Basin 1 014 001
900mm
840mm
700mm
225mm
300mm
225mm

© United Products 2017
Designed in Australia
01 02 03
04 05 06
Installation Manual
Installation Instructions - LEFTHAND Basin
If you have any doubts please contact us: [e-mail]
01. Position basin. Standard height 900mm from finished floor. Verify integrity of wall or load-bearing noggins
are in appropriate position for basin installation.
02. Drill & securely set basin fixing bolts in vertical wall surface. See hole pattern for hanging basin.
03. Install waste specified for the basin
04. Hang basin from bolts ensure basin is level. Fix with nylon basin fixing caps & nut. Ensure basin is level.
05. Connect basin to waste
06. Clean with a soapy sponge, followed by a rinse. For stubborn stains such as lime scale or soap build up
use a mild abrasive cleaner like Gumption®paste, Jif® cream or Ajax® cream or powder - use with a soft damp cloth
in wide circular motions. ENJOY
Mc Basin 1 014 001
900mm
840mm
700mm
225mm
300mm
225mm