Universal Remote Control Medius TX-1000 Complete Control User manual

Operating Your System
With The Medius TX-1000
COMPLETE
™
Universal Remote Control®
CONTROL
COMPLETE

This remote control was
Custom Programmed for you by:
For questions about your Custom Programming call:
Custom Programming of a complex home theater and/or a multi-room
system is one of the most challenging tasks within an audio/video instal-
lation. It involves an intimate knowledge of how the components interact
and exact details on the proper sequences of control.
Only a Complete Control dealer has the requisite experience and training
to quickly and effectively customize a remote control for true automated
operation.
Congratulations on your choice!
TX-1000 Owners Manual © 2006 Universal Remote Control, Inc.
Front Cover Photo courtesy of Robert Ridenour of Connected Technologies,
www.connected-technologies.com
The information in this manual is copyright protected. No part of this manual may
be copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.
The information in this manual may be subject to change without prior notice.
Complete Control is a registered trademark of Universal Remote Control, Inc.
Entertainment Made Simple is a trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.
Universal Remote Control, Inc.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: [phone] Fax: [phone]

TABLE OFCONTENTS
Introduction 1
LCD Touch Screen 1
Optional RF “No Rules” Operation 2
Installing Batteries 3
Programming the Medius 4
Selecting a New “Activity” 5
Using the Medius to Control an “Activity” 6
Displaying the Setup Screen 7
Selecting from the Setup Screen 7
Setting the TIME 8
Setting the LCD 8
Light Settings 10
Sound Volume 10
System Settings 11
Calibrating the Touch Screen 11
Version Information Displays 12
Warranty 12
Specifications 12

Page 1
MEDIUS OWNERS MANUAL
Congratulations!
You’ve purchased a unique synthesis of hardware and software engineering,
the Complete Control Medius. The Medius achieves a magnificent combina-
tion of power and flexibility, simplifying and automating operation of even the
most complex system.
One Touch Multi-Color Backlighting
Simply press the LIGHT button to backlight the screen.
Integrated Sound Signaling
The Medius incorporates a small speaker for beeps. Anytime you press a
button, the Medius signals that it has understood your command with a
beep sound.
LCD Touch Screen
The Medius is equipped with a bright easy to read LCD touch screen
which your installer will customize for your system. The screen buttons
change based on your activity. To use a button, simply tap the screen
with the tip of your finger. It is not necessary to use a stylus from a PDA.
Simply tap the interactive touch
screen buttons to operate them.
The busy symbol appears
when Medius is controlling your
system. It will blink as long as the
Medius is transmitting a command
or a series of commands (a
macro) to your system. While it
is transmitting, the Medius will not
respond to another button press.
When the Medius is finished con-
trolling your system, the indicator
will disappear, and you can press
any button.

Page 2
MEDIUS OWNERS MANUAL
Optional RF “No Rules” Operation
In combination with a Complete Control RF Base Station, the Medius can
control your system without being in line-of-sight of the equipment.
Any of the Complete Control MRF series of RF base stations is compatible
with the Medius. Both incorporate RF addressing. RF Addressing gives you the
ability to control equipment locations throughout your home, even if they are
concealed in other rooms or are behind closed doors.
4. Self-adhesive “Flashers” affix to the Infrared
sensors on the front panels of your compo-
nents. The Flashers relay commands to com-
ponents out of sight of the MRF-300’s Front
Blaster. The flashers plug in to the MRF-300’s
rear flasher line outputs via their 10 foot
cables. Uniquely, the MRF-300 can also con-
nect to a components rear panel IR input via
its adjustable IR Line Outputs.
3.The MRF-300’s built-in Front Blaster sends commands to
components in the same cabinet space as the MRF-300.
1.The Medius sends radio waves
in every direction, so you don’t
have to point the remote any-
more!
2.The RFX-150 RF Sensor can be freely
positioned for optimal reception.

Page 3
MEDIUS OWNERS MANUAL
Installing Batteries
Open the battery cover by depressing
the release latch and pulling back
the cover on the back of the control.
Remove the cover.
Observe the + and - polarity indica-
tions inside the battery compartment.
Place the four AA batteries into their
positions in the battery compartment
observing the + and - polarity indica-
tors on the batteries.
Now, replace the battery cover by
inserting the hinged end in first, then
snapping the cover back into place.

Page 4
MEDIUS OWNERS MANUAL
Programming the Medius
The Medius is programmed via a Windows PC equipped with a USB port
(programming cable included), using our proprietary software, TX-1000
Editor. You can download this software from our website:
www.universalremote.com
Basic setup takes only a short time with this software. However, to fully
automate an audio/video system the user must have a detailed knowledge
of each component, you the user (and your preferences) and how the sys-
tem is connected and operated. We highly recommend that you use a
professional audio/video installer to program your Medius so you will be
able to enjoy all the benefits of the Medius as well as one touch operation
via macros.

Page 5
MEDIUS OWNERS MANUAL
Selecting a New “Activity”
The Medius’s WATCH and LISTEN buttons display the activities you can
control with your Medius. When you want to watch something else (a
DVD movie, a videotape or an HDTV broadcast), simply press the
WATCH button and select the new activity. When you want to listen to
the radio or to a CD, touch the LISTEN button and select what you would
like to listen to.
Your installer will have programmed the button you pressed to totally con-
figure your system to watch or listen to whatever you selected. Now, the
screen will change, and all of the LCD buttons will be reconfigured to
give you full control of your system while watching or listening to your
selection!
When you press the LISTEN button,
you can see the most frequently used
activities you have for listening in
your system.
Press either of the PAGE buttons to see
any other available choices. You may
have only one page or your system may
have several pages of “Listen Activities”.
When you press the WATCH button,
you can see the most frequently used
activities you have for watching the
sources in your system.
Press either of the PAGE buttons to see
any other available choices. You may
have only one page or your system may
have several pages of “Watch Activities”.

Page 6
MEDIUS OWNERS MANUAL
Using the Medius to Control an “Activity”
Once you’ve selected a new activity, the Medius displays the title of the
activity at the top of the screen. Below the title, the LCD displays the cus-
tomized names of any special features you need for the activity. All the
hard buttons of the Medius have now changed to functions optimized for
this activity.
The Title displays
what activity you
can control.
The Volume
and Mute but-
tons always
control the
sound regard-
less of what
screen is dis-
played.
Press either of the
PAGE buttons to
see any other avail-
able choices. You
may have only one
page or your sys-
tem may have sev-
eral pages of spe-
cial features for this
activity.
The transport buttons (Play, Stop,
Back, Ahead and Pause) operate
when the selected activity requires
them (for example, if you watch
HDTV with a TiVo type of DVR,
these buttons will control the DVR).
The 4 way cursor
buttons enable you
to navigate on
screen guides and
menus with ease.
The Channel
and Previous
Channel but-
tons are pro-
grammable.
They will
change chan-
nels when
you have
selected an
activity like
Watching
HDTV .
The touch screen button labels describe
special features for this activity.

Displaying the Setup Screen
You can adjust the settings of the Medius whenever you like by pressing and
holding both the WATCH and the SEL button at the same time for three sec-
onds. When you do, the screen will change to the SETUP screen. If you do
not press any button on the SETUP screen within 30 seconds, the Medius
will time out and automatically return to normal operation. You can return to
normal operation before that by pressing either the WATCH or the LISTEN
button.
Selecting from the Setup Screen
Simply touch the button for the setting you’d like to adjust:
TIME - The time displayed on the Medius.
LCD - The appearance of the screen.
LIGHT - What the LIGHT button does.
SOUND - The beeps the Medius can make.
SYSTEM - The battery low warning.
TOUCH - Calibration of the touch screen.
VER - No adjustments are possible. Displays factory info.
At the same time, press and
hold both the WATCH but-
ton and the SEL button.
When the SETUP screen
appears, you can release the
two buttons.
Page 7
MEDIUS OWNERS MANUAL

Setting the TIME
You can correct the time displayed by changing the settings on this screen.
Setting the LCD
With these settings, you set the screen’s appearance when the Medius is not
in use. You can select either a blank or constant LCD display. Additionally,
you can control the contrast of the screen and the color of the backlighting.
Page 8
MEDIUS OWNERS MANUAL
To activate the
AM/PM setting,
press this button. .
After activating
AM/PM, press this
button to change
AM/PM.
To activate the
HOUR setting,
press this button.
To activate the
MINUTE setting,
press this button.
After activating
them, change the
HOURS or MIN-
UTES by observing
these buttons and
adjusting with the
LEFT and RIGHT
arrow keys.
To exit without sav-
ing any changes you
have made, press
EXIT.
To SAVE any
changes you have
made, press SAVE.
To activate the LCD
On/Off setting,
press this button. .
After activating LCD
On/Off, press this
button to change
whether the LCD is
displayed when not
in use.
Press the TIMEOUT
button if you wish to
change how much
time must pass
before the Medius
turns the LCD off.
To activate the
CONTRAST setting,
press this button.
For COLOR set-
tings, see the next
page.
After activating
change the CON-
TRAST by observing
this button and
adjusting with the
LEFT and RIGHT
arrow keys.
To exit without sav-
ing any changes you
have made, press
EXIT.
To SAVE any
changes you have
made, press SAVE.

Overriding COLOR Settings
Your professional installer may have set the color of the backlighting to
display different colors when you change activities. You can override the
settings he/she made in the TX-1000 software with one constant backlight-
ing color for all activities
After pressing the EDIT button shown above, the COLOR SET screen
appears. Here’s how the settings are adjusted:
Page 9
MEDIUS OWNERS MANUAL
Press the COLOR
button to activate
the COLOR Settings
row of buttons.
Normally, this but-
ton displays S/W to
indicate that the col-
ors are controlled by
the software (S/W).
To override these
settings, after acti-
vating the COLOR
row, press the S/W
button to change it
to USER. Once the
button displays
USER, press the
EDIT button to
change the backlight
color.
To activate RED,
first press this button.
To activate GREEN,
first press this button.
To activate BLUE,
first press this button.
To exit without sav-
ing any changes
you have made,
press EXIT.
To SAVE any
changes you have
made, press SAVE.
-+
+
After activating
them, change the
RED, GREEN or
BLUE by observing
these buttons and
adjusting with the
LEFT and RIGHT
arrow keys.

Page 10
MEDIUS OWNERS MANUAL
Light Settings
You can adjust the backlighting of the remote in three additional ways:
1. You can turn on/off the LCD backlighting.
2. You can turn on/off the hard button backlighting.
3. You can select the amount of time the lighting stays on after the last button
press.
Sound Volume
Your Medius beeps whenever a button is pressed. However, you can adjust
the volume to any level you like by adjusting the volume control here.
To exit without sav-
ing any changes
you have made,
press EXIT.
Once the LCD row is
activated, change
whether the backlight-
ing is on or off by
pressing this button.
Once the BUTTON
row is activated,
change whether
the backlighting is
on or off by press-
ing this button.
Once the TIMER row
is activated, change
the amount of time
the backlighting will
stay on by using the
LEFT and RIGHT
arrow keys.
To SAVE any
changes you have
made, press
SAVE.
To activate LCD
backlighting, first
press this button.
To activate the hard
button backlighting,
first press this button.
To activate the
TIMER setting, first
press this button.
To exit without sav-
ing any changes
you have made,
press EXIT.
Adjust the volume of
the beep by using the
LEFT and RIGHT
arrow keys.
To SAVE any
changes you have
made, press
SAVE.

System Settings
You can set your Medius to display the Low Battery warning at a power
level between 0% and 20% (in 5% increments).
Calibrating the Touch Screen
If you find that your Medius is not responding to finger presses accurately,
you can calibrate the touch screen with this setting. It works like this:
1. Press the TOUCH button on the SETUP screen.
2. The screen changes and displays a small + symbol in the top left
corner.
3. Press the + symbol with the tip of your fingernail as accurately as
you can.
4. The + symbol now moves to the top right corner, then the bottom
left corner, the bottom right corner and finally the center of the
screen. Each time, press the + symbol as accurately as you can.
5. When the process is complete, the screen will return to the
SETUP screen.
Anytime you want, you can exit the Calibration screen by pressing the
WATCH button.
Page 11
MEDIUS OWNERS MANUAL
Once the WARN row
has been activated,
use the LEFT and
RIGHT arrow keys to
cycle through the
available battery level
settings (0%, 5%,
10%, 15% or 20%).
To exit without sav-
ing any changes you
have made, press
EXIT.
The current battery
power remaining is
displayed here.
To SAVE any
changes you have
made, press
SAVE.
To activate the
battery low warn-
ing row, press the
WARN button.
The amount of
available memory
left to utilize is dis-
played in this row.

Page 12
MEDIUS OWNERS MANUAL
Version Information Displays
Should you be curious, the Version indicates what firmware and software
versions were used to program your Medius.
Warranty
The Medius is covered against any manufacturing defects or faults in
workmanship for a period of one year from the date of purchase when
purchased from an authorized Complete Control dealer. Units
purchased from online auction sites or other unauthorized resellers have
no warranty. This warranty does not cover the following items:
Damage from misuse, neglect, or acts of nature.
Products that have been modified or incorporated into other products.
Products purchased more than 12 months ago.
Units purchased from unauthorized dealers or companies.
Specifications
Memory - 4 Megabits of Flash Memory (for User Configuration)
Devices - Flexible, typically can support up to 40 Devices
Pages - Flexible, typically can support up to 40 Pages on each Device
Learning Capability - Standard frequencies (15kHz to 460kHz)
Macro Capability - Up to 255 steps each, however nesting is allowed
IR Range (Line of Sight via Infrared): 30-50 feet, depending on the environment
RF Range (radio frequency): 50 to 100 feet, depending upon the environment
RF Frequency: 418MHz
Weight: 31.4 ounces (with batteries)
Size: 6.46” H x 5.39” W x 1.66” D
Batteries: 4 AA Batteries
To exit, press
EXIT.

500 Mamaroneck Avenue, Harrison, NY 10528
Phone: [phone] Fax: [phone]
www.universalremote.com
COMPLETE
™
Universal Remote Control®
CONTROL
COMPLETE