UPPAbaby ALTA User manual

01
USA | UPPAbaby, 276 Weymouth Street, Rockland, MA 02370 | uppababy.com | 1.844.823.3132
Canada | 5514KM, 201 Wicksteed Avenue, Suite 2, Toronto, Ontario M4G 0B1 | uppababy.com | 1.844.823.3132
Model 1319-ALT-CA
All rights reserved. © 2020 UPPAbaby. UPPAbaby and all associated logos are trademarks. All product specications
are correct at time of print. UPPAbaby reserves the right to change anything at any time without prior notice.
Color representation is as close as print processes allow. Not all colors available at all retailers. UbMAN053-V03
UbMAN053-V03.indd 1UbMAN053-V03.indd 1 4/14/20 4:32 PM4/14/20 4:32 PM

Product Information 4
Registration 4
Certication 4
Lifetime Warranty 5
Warnings + General Safety Information 6
Child Usage Requirements 11
Vehicle Compatibility 12
Overview of Vehicle Seat Belt Systems 12
Universal Anchorage System (UAS) 14
Vehicle Head Restraint 15
Product Overview 16
Using the ALTA 18
Booster Assembly 18
Active Response Headrest Adjustment 20
SECUREFit Lap Belt Positioner 21
Install Using Lower Anchors 23
Release from Lower Anchors 25
Storing Lower Anchors 26
Use Without Lower Anchors 27
Securing the Child 28
Additional Information 29
Attaching/Removing Lap 29
Belt Positioner Cover
Remove and Install Seat Cover 30
Remove and Install Headrest Cover 32
Cup Holder Use 36
Cleaning and Maintenance 37
Warranty 38
Read all instructions before use of this Child Restraint.
Keep these instructions for future reference.
UbMAN053-V03.indd 2-3UbMAN053-V03.indd 2-3 4/14/20 4:32 PM4/14/20 4:32 PM

54
REGISTRATION
Model Number:
Manufactured Date:
Expiration Date:
PLEASE TAKE A MOMENT TO FILL OUT THE ABOVE INFORMATION
which can be found on the bottom of your ALTA Child Restraint
Thank you for selecting the ALTA Child Restraint from UPPAbaby.
Please register your Child Restraint by lling out and sending the
postage-paid registration card that came with your Child Restraint
or register online at: uppababy.com/ca/register/carseat.
Child Restraints can be recalled for a variety of safety reasons.
You MUST register this restraint to be reached in a recall.
For recall information, call Transport Canada’s Motor Vehicle Safety Centre
at 1-800-333-0371 or go online to www.tc.gc.ca/en/transport-canada.html.
PRODUCT INFORMATION
CERTIFICATION
This child restraint
system conforms to all
applicable Canadian Motor Vehicle
Restraint Systems and Booster
Seat Safety Regulation (RSSR) and
Canadian Motor Vehicle Safety
Standard (CMVSS 213) for child
restraint systems and (CMVSS 213.2)
for booster seats.
*Lifetime warranty applies to UPPAbaby car seats and the original owner, within the lifetime of the product. To receive your
Limited Lifetime Warranty, you MUST register within three months of purchase and provide a valid purchase receipt form an
authorized UPPAbaby retailer. The “lifetime” of the product is dened as the period of use by the registrant for use with his/her
children up to 10 years from date of manufacture. For complete UPPAbaby Warranty refer to page 38.
For replacement parts, service or additional questions, please contact our Customer Experience Team:
uppababy.com/ca/support | email: [email protected] | 844-823-3132
We are with you for the long haul. Register your car seat
within three months to claim your
Limited Lifetime Warranty.*
Thank you for being part of the UPPAbaby family.
UbMAN053-V03.indd 4-5UbMAN053-V03.indd 4-5 4/14/20 4:32 PM4/14/20 4:32 PM

76
WARNING
DEATH OR SERIOUS INJURY CAN OCCUR
WARNINGS + GENERAL SAFETY INFORMATION
NEVER place this Child Restraint on a front seat with
an airbag unless the airbag can be turned off. DEATH
OR SERIOUS INJURY can occur. The back seat is the
safest place for children 12 and under. Refer to the
vehicle owner’s instruction book before installing this
Child Restraint in a seating position with side airbags.
WARNINGS + GENERAL SAFETY INFORMATION
Failure to follow all warnings, product labels and instructions could result in
SERIOUS INJURY or DEATH.
• NEVER leave child unattended.
• DO NOT use this Child Restraint system if it has been in a vehicle accident.
According to accident statistics, children are statistically safer when properly
restrained in the rear seating positions than in the front seating positions,
whether there are airbags, advanced airbags or no airbags at all. To ensure
your child’s safety refer to approved seating positions on page 12 in this
manual or your Vehicle’s Owner Manual.
• NEVER leave Child Restraint unsecured in your vehicle even when it is
unoccupied. In a crash, it could become a projectile and injure other vehicle
occupants.
• DO NOT use this Child Restraint without the seat cover. Failure to do this
can result in serious injury.
• Use this Child Restraint only on vehicle seats that face forward.
• DO NOT use on seats that face the sides or rear of the vehicle.
WARNING
UbMAN053-V03.indd 6-7UbMAN053-V03.indd 6-7 4/14/20 4:32 PM4/14/20 4:32 PM

98
WARNINGS + GENERAL SAFETY INFORMATION WARNINGS + GENERAL SAFETY INFORMATION
• DO NOT remove or cover up any of the warning labels or other labels on this
Child Restraint.
• ALWAYS check all surfaces of restraint before securing your child. In warm
weather, Child Restraints can become very hot and may result in burns to
your child. Park in the shade or where sun does not directly hit the Child
Restraint. Cover the Child Restraint with a sheet or blanket when not in use.
• ALWAYS properly store Lower Anchor Connectors when not in use.
• This child seat can only be used in the following classes of vehicles:
multi-purpose passenger vehicles, passenger cars, or trucks.
• Check the vehicle’s owner manual for more information about airbag/Child
Restraint use.
• For vehicles without a back seat, refer to your vehicle’s owner manual.
• Ensure that the child’s head is positioned correctly within the headrest and
that the shoulder belt is placed correctly over the child’s shoulders.
• DO NOT use this Child Restraint system in a vehicle seating position where
it cannot be tightly secured.
• DO NOT modify this restraint except as instructed in this instruction book.
Minor modications can change the way a Child Restraint performs in a crash.
• DO NOT leave loose objects, e.g. cups, toys, bags, umbrellas, etc., in the
vehicle because they can become deadly projectiles in a crash.
• DO NOT take child out of this Child Restraint while the vehicle is moving.
• DO NOT allow children to play with this Child Restraint. It is not a toy.
• NEVER use any non-regulated products with this Child Restraint including
any accessories, pads, or products supplied by other manufacturers, unless
approved and tested by UPPAbaby. Items not tested with this restraint could
injure your child.
UbMAN053-V03.indd 8-9UbMAN053-V03.indd 8-9 4/14/20 4:32 PM4/14/20 4:32 PM

1110
CHILD USAGE REQUIREMENTS
This Child Restraint is for use by children who meet BOTH requirements below:
WEIGHT: 18.1 – 45.4 kg (40 – 100 lbs)
HEIGHT: 96.5 – 144.8 cm (38 – 57 in)
• DO NOT use this booster beyond the expiration date or if the child outgrows
either the weight or height requirements.
• This booster is NOT for use with children who weigh less than 18.1 kg (40 lbs).
• Use only the vehicle’s lap and shoulder belt system when restraining the child
in this booster.
• IMPORTANT: This product is NOT to be used without a backrest, and the
backrest should NEVER be separated from the base.
WARNINGS + GENERAL SAFETY INFORMATION
• Check the vehicle belt before each use. Use only if the belt is tightened
properly
and securely.
• DO NOT use a Child Restraint with damaged or missing parts.
• Read all instructions for additional warnings.
• DO NOT use only the lap belt when using this seat.
• The shoulder belt must always be adjusted snugly across the child’s chest.
• NEVER place the shoulder belt under the child’s arms.
•
Failure to follow these warnings could cause serious injury or death to your child.
• NEVER use this Child Restraint on an aircraft. This restraint is NOT certied
for use in aircraft, because aircraft do not have shoulder belts.
UbMAN053-V03.indd 10-11UbMAN053-V03.indd 10-11 4/14/20 4:32 PM4/14/20 4:32 PM

1312
<
22"
<
22"
<
22"
<
22"
PLEASE READ THE FOLLOWING INFORMATION BEFORE INSTALLING THIS CHILD RESTRAINT!
Check Your Vehicle’s Owner Manual
Vehicle seat belts differ from vehicle to vehicle. This booster is compatible with most vehicle seat belt systems
and can ONLY be used with three-point (lap-shoulder) vehicle seat belts.
VEHICLE COMPATIBILITY – Overview of Vehicle Seat Belt Systems
SLIDING LATCH PLATE LOCKING LATCH PLATE
<
22"
<
22"
VEHICLE SEAT
(LAP/SHOULDER BELT)
WEBBING
LATCH PLATE
BUCKLE
VEHICLE COMPATIBILITY – Overview of Vehicle Seat Belt Systems
Door MountedLap Belt ONLY Motorized (Automatic)
<
22"
<
22"
X
<
22"
<
22"
NOTE: Refer to your vehicle’s owner manual for information regarding booster use with vehicle seats that
have switchable retractors or inatable seat belts.
WARNING
DEATH OR SERIOUS INJURY CAN OCCUR.
• CHECK YOUR VEHICLE INSTRUCTION BOOK for information regarding your vehicle seat
belt system(s). Not all vehicle seat belts work with this Child Restraint.
• Use only the vehicle’s lap and shoulder belt system when restraining the child in this Child
Restraint.
• DO NOT use this Child Restraint with the following seat belt systems:
This Child Restraint can only be installed on
vehicle seats that face forward.
DO NOT install in seats that face to the sides or
rear of the vehicle.
UbMAN053-V03.indd 12-13UbMAN053-V03.indd 12-13 4/14/20 4:32 PM4/14/20 4:32 PM

1514
VEHICLE COMPATIBILITY – Vehicle Head Restraint
The back of the booster seat MUST t tightly against
the back of the vehicle seat. If the vehicle head restraint
cannot be adjusted or removed, a different seating
position
or different booster seat should be used.
IMPORTANT: If you remove your vehicle head restraint, be sure to
stow in a secure place; check your vehicle’s owner manual. Replace
the head restraint when the booster is removed from the vehicle seat.
VEHICLE COMPATIBILITY – Universal Anchorage System (UAS)
The universal anchorage system helps to anchor the booster seat in the car for stability and to prevent it from
becoming a projectile when not occupied in the event of a crash.
This booster can be installed with
lap shoulder belts in a vehicle that
contains lower anchors. You must
use the lap-shoulder belt to properly
secure your child. The lower anchors
must be standard spacing 28 cm (11 in).
Check your vehicle’s owner manual to
determine lower anchor compatible
seating positions.
When not in use, the lower anchor
connectors must be properly
secured in the base of the booster.
Lower Anchors
UbMAN053-V03.indd 14-15UbMAN053-V03.indd 14-15 4/14/20 4:32 PM4/14/20 4:32 PM

1716
ASECUREFit Shoulder Belt Guide
BUpper Seat Cover
CSide Impact Pods
DArmrests
ECup Holder Attachment
FLower Seat Cover
GSECUREFit Lap Belt Guide
HLower Anchor Connector Release/
Red to Green Indicator
IRigid Lower Anchor Connect
J Energy Response Headrest
KSECUREFit Lap Belt Positioner
LLap Belt Positioner Cover
MLower Anchor Release Handle
PRODUCT OVERVIEW PRODUCT OVERVIEW
UbMAN053-V03.indd 16-17UbMAN053-V03.indd 16-17 4/14/20 4:32 PM4/14/20 4:32 PM

1918
USING THE ALTA – Booster Assembly USING THE ALTA – Booster Assembly
3 4
1Lay the Booster Seat Bottom on
oor facing up.
2Attach the Backrest to the
Booster Seat Bottom, by hooking
over the seat bar hinge on the
seat bottom as shown.
3Rotate the Backrest up until
it clicks into the full upright
position and locks into place.
4Tuck the Fabric Panel between
the Backrest Fabric Cover and
the Seat Back Frame. Be sure
Fabric Panel is at against the
Seat Back Frame.
IMPORTANT: This product is NOT to be used without a backrest, and the backrest should NEVER be
separated from the base.
2
1
UbMAN053-V03.indd 18-19UbMAN053-V03.indd 18-19 4/14/20 4:32 PM4/14/20 4:32 PM

2120
Adjusting the Headrest
The Headrest can be adjusted for best t to your child and
optimized protection.
NOTE: The headrest can be adjusted with the child in the seat.
1Squeeze grey button at top of seat.
2Slide headrest to desired height.
Proper Headrest Height
Proper height of the headrest and belt guides are critical for
optimal performance. The Headrest should rest just above the
top of the child’s shoulders ensuring the shoulder belt guide is
properly positioned.
USING THE ALTA– Active Response Headrest Adjustment
1
2
USING THE ALTA – SECUREFit Lap Belt Positioner
We strongly recommend using the Lap Belt Positioner.
The Lap Belt Positioner holds the lap part of the vehicle
belt in place for proper belt positioning.
Using the Lap Belt Positioner
Hook the red Lap Belt Positioner over the
Vehicle Lap Belt as shown.
NOTE: Adjust the Lap Belt Positioner as needed -
See the ADJUSTING THE LAP BELT POSITIONER
section for more details (page 22).
IMPORTANT: The lap portion of the belt should rest on the top of the child’s thighs and NOT across the
child’s abdomen.
IMPORTANT: The child’s ears MUST
be below the top of the booster headrest.
UbMAN053-V03.indd 20-21UbMAN053-V03.indd 20-21 4/14/20 4:32 PM4/14/20 4:32 PM

2322
Adjusting the Lap Belt Positioner
NOTE: You may have to open the Lap Belt Positioner
Soft Cover to access the buckle and strap.
1Pull down on the strap to tighten.
2Pull up on the bottom of the buckle to loosen.
3Adjust the Lap Belt Positioner so that the vehicle
lap belt lies at and snug across the child’s upper
thighs and not above.
USING THE ALTA– SECUREFit Lap Belt Positioner
1 2
3
USING THE ALTA – Install Using Lower Anchors
Lower Anchors can be used to prevent the booster
from becoming a projectile in the car when not in use.
The Lower Anchor system does not restrain your child.
You must use the lap-shoulder belt to properly secure
your child. Always refer to your vehicle’s owner manual
to determine if your vehicle is equipped with Lower
Anchors and in what seating positions.
To Install Using Lower Anchors
1To release the Rigid Lower Anchors Connectors,
pull the Lower Anchors Release handle located at
the front of the seat to expose from the storage
housing.
2Rotate the Rigid Lower Anchors Connectors
180-degrees until they are pointing toward the
Lower Anchors in the vehicle.
1
2
IMPORTANT: The lap portion of the vehicle belt
must not rest on the child’s abdomen.
UbMAN053-V03.indd 22-23UbMAN053-V03.indd 22-23 4/14/20 4:32 PM4/14/20 4:32 PM

2524
NOTE: Before installing the booster, pull the Rigid Lower
Anchor Connectors to ensure they are fully extended from
the housing.
3Place the booster on the vehicle seat. Push the Rigid
Lower Anchor Connectors onto BOTH Lower Anchors until
you hear a click. The red to green indicators located on
connectors should be green indicating a secure connection.
Pull back on each connector to ensure secure.
4Pull Lower Anchor Release Handle and push the booster
in the seat bight until the backrest sits against the vehicle
seat back.
USING THE ALTA – Install Using Lower Anchors
The Rigid Lower Anchor Connector
indicators will both show GREEN when
properly secured.
3
4
To Release from Lower Anchors
To release the booster from the Lower Anchors pull
back on the Lower Anchor Connector Release located
on the side of each Rigid Lower Anchor Connector
and remove the booster from the vehicle seat.
USING THE ALTA – Release from Lower Anchors
The back of the booster MUST t tightly
against the back of the vehicle seat, and
the front of the booster MUST NOT hang
over the front of the vehicle seat. If the
vehicle head restraint cannot be adjusted
or removed, a different seating position or
different booster seat should be used.
IMPORTANT: NEVER leave Child Restraint
unsecured in your vehicle even when it is
unoccupied. In a crash, it could become a
projectile and injure other vehicle occupants.
UbMAN053-V03.indd 24-25UbMAN053-V03.indd 24-25 4/14/20 4:32 PM4/14/20 4:32 PM

2726
1
2
USING THE ALTA – Storing Lower Anchors
To Store Rigid Lower Anchor Connectors
1Rotate both Rigid Lower Anchor Connectors back towards
seat.
2While pulling the Lower Anchor Release at the front of
booster, simultaneously push the Lower Anchor Housing
back towards the booster until it locks into place.
To Install Without Using Lower Anchors
With Rigid Lower Anchor Connectors stored, place the booster
on the vehicle seat with the backrest ush with the vehicle seat
back.
USING THE ALTA – Use Without Lower Anchors
The back of the booster MUST t tightly
against the back of the vehicle seat, and the
front of the booster MUST NOT hang over
the front of the vehicle seat. If the vehicle
head restraint cannot be adjusted or
removed, a different seating position or
different booster seat should be used.
IMPORTANT: NEVER leave Child Restraint unsecured in
your vehicle even when it is unoccupied. In a crash, it could
become a projectile and injure other vehicle occupants.
When not using Lower Anchor, use the vehicle lap and
shoulder belt to secure the booster.
IMPORTANT: ALWAYS properly store Rigid Lower
Anchor Connectors when not in use.
UbMAN053-V03.indd 26-27UbMAN053-V03.indd 26-27 4/14/20 4:32 PM4/14/20 4:32 PM

2928
USING THE ALTA – Securing the Child
Securing the Child in the Booster
1With the booster correctly positioned in the vehicle and
the Headrest in the proper position, place child in the
booster seat with child’s back at against the back of the
booster seat. Route the Vehicle Shoulder Belt across the
child’s chest and through the RED LOWER BELT PATH ,
UNDER the armrest towards the Vehicle Buckle.
2Buckle the Vehicle Shoulder Belt.
3Slide the Vehicle Shoulder Belt into the RED SHOULDER
BELT GUIDE ensuring it passes completely under the
Shoulder Belt Guide hook and does not fall off the child’s
shoulder. Remove slack from vehicle seat belt.
4 The Vehicle Lap Belt must lie at and snug across the child’s
upper thighs. We strongly recommend using the Lap Belt
Positioner. Adjust the RED LAP BELT POSITIONER such
that when you route the lap belt under it, the lap belt sits
at across the child’s upper thighs and not above.
Attaching/Removing Lap Belt Positioner Cover
Attaching/Removing the Lap Belt
Positioner Soft Cover
1Position the Soft Cover and the Lap Belt Positioner
as shown. Insert both tabs on the Soft Cover into
the cutout in the Seat Cover.
2Fold the Lap Belt Positioner forward onto the Soft
Cover.
3Wrap the Soft Cover over and around the Lap Belt
Positioner.
4Secure the Soft Cover with the hook and loop
closure.
2
43
IMPORTANT: The lap and shoulder belt MUST route
under the armrests.
IMPORTANT: The child’s
ears MUST be below the
top of the booster headrest.
1
UbMAN053-V03.indd 28-29UbMAN053-V03.indd 28-29 4/14/20 4:32 PM4/14/20 4:32 PM

3130
Remove and Install Seat Cover
3
3Pull the back of the Seat Cover out from behind the
Headrest.
4Pull the Seat Cover over the Lap Belt Positioner and
remove from the booster.
To Install the Seat Cover
1Place the Seat Cover on the Booster.
2Pull the Lap Belt Positioner through the slot in the
Seat Cover.
3Repeat the steps used to remove the Seat Cover in
reverse order.
Remove and Install Seat Cover
The Seat Cover can be removed for cleaning -
See the CLEANING AND MAINTENANCE section
(page 37) for more details.
To Remove the Seat Cover
1 Locate the pull tab for the Seat Cover zipper. Unzip
the zipper to release the Seat Cover from the outside
edge of the Booster.
2Pull to release both snap buttons at the back of the
Seat Cover.
1
2
UbMAN053-V03.indd 30-31UbMAN053-V03.indd 30-31 4/14/20 4:32 PM4/14/20 4:32 PM

3332
Remove and Install Headrest Cover
3
1
3Continue to pull the top of the Headrest Cover
fabric down to release the elastic straps from both
of the plastic hooks in the Booster.
4Remove the Headrest Cover from the Booster.
To Install the Headrest
1Locate the fabric key stored inside the pocket in
the seat fabric.
NOTE: If the Seat Cover has not been removed, you
will need to unzip the Seat Cover to access
this fabric key storage pocket.
Remove and Install Headrest Cover
The Headrest Cover can be removed for cleaning - See
the CLEANING AND MAINTENANCE section (page 37)
for more details.
To Remove the Headrest Cover
1 Pull on the lower edge of the Headrest Cover to
remove the fabric from the slot that runs around
the outside of the Booster.
Continue up the side of
the booster, pulling the fabric away from the side
bolsters and red Shoulder Belt Guide. Repeat for
the other side.
2 Pull the fabric out of the slot in the top of the
Booster. Pull the fabric forward and down making
sure both elastic straps are pulled forward through
the cutouts in the foam.
2
1
UbMAN053-V03.indd 32-33UbMAN053-V03.indd 32-33 4/14/20 4:32 PM4/14/20 4:32 PM

3534
Remove and Install Headrest Cover
4
5
4Push the Headrest Cover into the slot on
the
outside of the side bolster using the fabric
key. Repeat for the other side.
5Push the Headrest Cover into the slot on
the side of the Booster using the fabric key.
Repeat for the other side.
6Press the Headrest into slot under the RED
SHOULDER BELT GUIDE.
7Continue to push the Headrest behind the
Shoulder Belt Guide using the fabric key.
Double check that the Headrest is tucked
completely outside of the Shoulder Belt
Guide. Repeat for the other side.
8Store the fabric key inside the pocket in the
Seat fabric.
Remove and Install Headrest Cover
2Hook the elastic straps on the Headrest Cover
around both of the plastic hooks located at the top
of the Booster seat back. Pull both elastic straps up
and through the cutouts in the foam.
3Use the fabric key to push the top of the Headrest
Cover into the slot at the top of the Booster.
2
37
6
UbMAN053-V03.indd 34-35UbMAN053-V03.indd 34-35 4/14/20 4:32 PM4/14/20 4:32 PM

3736
Cup Holder Use
WARNING: DO NOT place glass, metal
containers or hard sharp objects in cup
holder as they could become a projectile
in a crash and cause serious injury.
NEVER put a hot liquid in the cup holder.
To Attach the Cup Holder
Push cup holder stem into designated slot in side
of the booster armrest.
To Remove the Cup Holder
Pull rmly.
NOTE: Cup holder can be installed on either side
of booster.
CLEANING AND MAINTENANCE
CLEANING FABRICS - Fabrics include: seat, headrest and lap belt positioner covers
Machine wash in cold water on gentle cycle
with mild detergent. DO NOT bleach.
CLEANING LAP BELT POSITIONER WEBBING
CLEANING PLASTIC
Spot clean using warm water with mild detergent.
DO NOT bleach.
Spot clean using warm water with mild detergent.
Air dry completely before re-use or storage.
Towel dry completely before re-use or storage
Dry at and away from direct
sunlight before re-use or storage.
CLEANING LOWER ANCHOR CONNECTORS - Anchors should fasten with a “click”. If not, rinse under warm
running water. DO NOT use detergents or lubricants.
DO NOT iron or dry clean.
UbMAN053-V03.indd 36-37UbMAN053-V03.indd 36-37 4/14/20 4:32 PM4/14/20 4:32 PM

3938
WARRANTY
Welcome to the UPPAbaby family! We are with you for the long haul. Register your car seat within
three months to claim your Limited Lifetime Warranty*.
Register your product at: uppababy.com/ca/register/carseats
*Lifetime warranty applies to UPPAbaby car seats and only the original owner, within the lifetime of
the product. To receive your Limited Lifetime Warranty, you MUST register your car seat within three
months of purchase and provide a valid purchase receipt from an authorized UPPAbaby retailer. The
“lifetime” of the product is dened as the period of use by the registrant for use with his/her children
up to 10 years from date of manufacture.
Your UPPAbaby product is warranted to be free from any manufacturing defects for a period of 2 years from the date of
purchase under normal use and in compliance with the operating instructions.
This warranty is not transferable and extends only to the original retail purchaser and is only valid when supplied
with proof of purchase from an authorized retailer. Proof of purchase must be retained for this warranty.
The warranty is valid only in the original country of purchase. This warranty is subject to the conditions set forth by country
in which the items were purchased. Conditions may vary. UPPAbaby will not ship replacement or repair parts out of the
country of purchase.
UPPAbaby will provide replacement parts or conduct repairs as determined tting by the company. UPPAbaby reserves the
right to exchange item with a replacement part. Some parts may be replaced with newer model parts as the product is
improved over time.
WARRANTY
This warranty does not cover:
• Defects caused by misuse or poor maintenance. (Please refer to the product instruction booklet for guidance on item
use and maintenance).
• Damage caused by improper installation of UPPAbaby parts and/or accessories. (Please refer to product instruction
booklet for guidance on item assembly and use).
• Damage caused by corrosion mold or rust due to poor maintenance, service or storage.
• Damage resulting from normal wear and tear.
• Damage or degradation caused by the sun, sweat, detergents, damp storage conditions or frequent washings.
• Repairs or modications carried out by a third party.
• Product purchased from an unauthorized retailer. (Approved retailers are listed on our website uppababy.com/ca).
• Second owners and users other than the registrant.
• Damage resulting from airline shipping and handling.
• Products Involved in an accident.
UPPAbaby reserves the right to determine if warranty terms and conditions have been met.
For warranty service: In the US* and CA please contact UPPAbaby customer service [phone]
and visit uppababy.com/ca/support to send an email.
UbMAN053-V03.indd 38-39UbMAN053-V03.indd 38-39 4/14/20 4:32 PM4/14/20 4:32 PM