urban drivestyle UNI Micro User manual

889
1305
790 SEAT / 820 BRAKE LEVER
290
889
1305
1020
605

Parameter
Product name: UNI Micro
Model name: QSEB03
Size: 1310mm x 620mm x 1020 (max.)
Folded size: 1310x260x820mm
Wheel base: 889mm
Net weight: 17kg
Range: PAS >30-50 km
Max. load: 110kg
Max. speed: 25km/h
Charging time: 5 Hrs
Battery type: Lithium-ion
Battery capacity: 36V 7.6Ah
Noise : s 62 dB(A)
Motor : MXUS 250W brushless geared
Max rated output power/peak: 350 / 250W
Motor efciency: ≥78%
Rated RPM: 310±10r/min
Rated voltage: 36V
Max torque: 40N.m
Overcurrent protection: 15 ±1A
Low-voltage protection: 30 ±1 V
Kwh: ≤1.2Kw.h
Modes: 5 levels
Tire diameter: 16 inch
Frame: 6061 Al-Alloy
Front fork: 6061 Al-Alloy
Brakes: 160mm disc brakes
Rim: 16 inch Al-Alloy 12G36H
Tire: Kenda 16“
Chain wheel: Prowheel 52T
Chain: KMC
Handle bar: 6061 Al-Alloy Foldble
Display: KT LCD-5
Controller: Kunteng sine wave FOG
Brake levers: Al-Alloy e-bike lever
Saddle: KNUS
Pedal: foldable pedals

Attention
Battery & Charging
1. Red indicator on the charger indicates charging. When it turns
green, please stop charging your battery by plugging it out.
2. Do not expose to temperature -20°C < or > 35°C. Fully charge the
battery and store separately if it won‘t be used for over 30 days. Fully
charge it every 60 days, or the battery may self-discharge and be
damaged. This damage is not covered by any Warranty.
3. Never expose your battery to damp/wet environments or soak them
in water. Never short circuit the battery terminals, this damage is not
covered by the Warranty.
4. Charge with the original charger only!
5. Do not disassemble/damage battery pack. Do not place it in or close
to re or drop it from high grounds. Avoid touching the ports/contacts.
6. Turn off elctric bike power before charging it. Plug the charge port
rst then the AC plug.
7. Do not cover any items on the charger during charging.
8. Pull out charger port before the AC plug.
9. Please keep the battery out of the reach of children.
10. The capacity of Li-ion will decrease when -l0°C or colder.
11. Recycle or dispose battery in accordance with local regulations.
Riding & Maintance
1. Ride with your helmet on and follow the local laws
and regulations.
2. Read this instruction carefully before riding the elctric
bike.
3. switch your light on when visibility is poor-
and in the dark.
5. Fully check break system, tire pressure and remaining
battery level before riding.
6. PLEASE always use both brakes.
7. Do not do intense riding, offroad or stunts.
8. Do not ride into water.
9. Replace wearing parts (e.g. brake pads)
in time.

Declaration of Conformity (for countries within EU)
According to EC directive 2006/42/EC on machinery (Annex II A)
This declaration relates exclusively to the machinery in the state in which it was placed on the market and excludes components
which are added and/or operations carried out subsequently by the nal user. The declaration is no longer valid if the product is
modied.
Herewith, we declare, that your UNI Micro Pedelec complies with all essential requirements of the Machinery Directive
2006/4 2/EC and Directive 2004/108/EC relating to electromagnetic compatibility.
The following technical standards were used:
EN ISO 4210:2015 Cycles - Safety requirements for bicycles
EN 15194:2009+A1 :2011 Electrically Power Assisted Cycles (EPAC)
Berlin, March 05, 2020
Urban Drivestyle GmbH
Wilhelminenhofstraße 92
12459 Berlin
Germany
Commercial Register-Nr.: HRB 193941 B
Ust.lD-Nr.: DE316683386
www.urbandrivestyle. corn