URBAN OUTFITTERS 69551646 User manual

Page 1 of 4
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized
reproduction, adaptation, distribution or other infringement will be
A) End
x2
B) Foot
x2
G) Center Plastic Cap
x15
F) End Plastic Cap
x30
D) Center Rail
x1
E) Center Foot
x2
C) Siderail
x2
J) Bolt
[M6x70mm] x2
N) Hex key
x1
M) Falt Washer
x20
I) Bolt
[M6x40mm] x2
K) Nut
[M6] x2
L) Bolt
[M6x15mm] x16
O) Wrench
x1
Wally Bed
Assembly Instructions
TOOLS REQUIRED BUT NOT INCLUDED: N/A
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning
vents. Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white
cloth. Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area. You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
H) Slat
x30

STEP 1
Screw Bolts (I) into Center Feet (E) then screw Center Feet (E) onto Center Rails (D). Twist to tighten.
STEP 2
Slide Foot (B) onto Side Rails (C). Insert Bolts (L) into Flat Washers (M) and Side Rails
(C) as shown. Tighten with Hex K (N). Repeat for additional Foot (B).
2
C
C
Bx2
N
M
Lx4
Page 2of 4
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized
reproduction, adaptation, distribution or other infringement will be
Wally Bed
Assembly Instructions

STEP 3
Slide End (A) onto Side Rails (C). Insert Bolts (L) into Flat Washers (M) and into Side Rails (C) as shown.
Tighten with supplied Hex Key (N). Repeat for additional End (A).
STEP 4
Insert Center Rail (D) onto the brackets at the center of Ends (A) as shown. Insert Bolts (J) into Flat
washers (M) and into the brackets as shown. Tighten with supplied Hex Key (N) and Wrench (O).
N
ML
X4
D
A x2
Page 3of 4
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized
reproduction, adaptation, distribution or other infringement will be
Wally Bed
Assembly Instructions

STEP 5
Firmly press Plastic Caps (F&G) onto Side Rails (B) and Center Rail (D) as shown.
STEP 6
Continued.
x15
F
F
H
H
F
G
GG
D
H
H
X 15
2120mm
291mm
323mm
1618mm
Wally Bed
Assembly Instructions
Page 4of 4
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized
reproduction, adaptation, distribution or other infringement will be