URBAN OUTFITTERS Selene 81120321 User manual

SELENE CIRCLE SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OFURBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
td
Page 1 of 5
TOOLS REQUIRED BUT NOT INCLUDED:
*REQUIRED TWO PEOPLE WHILE ASSEMBLING*
Do not throw away packing materials and carton until after
assembly. Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposureto sunlight. Do not place overheat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with aclean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area. You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
A) Metal Frame x2
E) Glass (S) x1
I) Bolt [M6 x 10mm] x16
B) Side Cross rail x8
F) Glass (L) x2
(J) Suction cup x16
(G) Glass (M) x1
(K) Hex Keyx1
(H) Bolt [M6x44mm]x8
(L) Wall Strap x2
N) Wall Screws x2
D) Short Cross Rail x2
C) Long Cross Rail x2
M) Plastic Anchor x2

SELENE CIRCLE SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OFURBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
td
Page 2 of 5
STEP 1
Place the Suction cup (J) onto side cross rail (B) like the image below. Align long cross rail (C) & short
cross rail (D) with the side cross rail (B). Insert bolts (H) and tighten with supplied hex key (K).

SELENE CIRCLE SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OFURBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
td
Page 3 of 5
STEP 2
With help align both frames (A) with assembled cross rails (step 2). Insert bolts (I) as shown and partially tighten
with supplied hex hey (K).Once all bolts are inserted,tighten fully with supplied hex hey (K). Flip assembled shelf
frame over onto its base.

SELENE CIRCLE SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OFURBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
td
Page 4 of 5
STEP 3
Gently lay all the glass (E), (F), (G) on assembled shelf.

SELENE CIRCLE SHELF
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OFURBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
td
Page 5 of 5
STEP 4
Contact your local hardware store to purchase the correct anchors for your wall-type. Mark the holes on the wall. Drill
holes at marks. Carefully hammer in the plastic anchors (M). Attach wall straps (L) into the hole, using wall screw (N)
as shown.