URBAN OUTFITTERS MIES User manual

Page 1 of 2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
A) Low Media Console x1 B) Metal Leg x2
D) Allen Bolt
[1/4” x 1-1/4”] x4
E) Lock Washer
[1/4”] x4
F) Flat Washer
[1/4"] x4
C) Allen Bolt
[1/4” x 16mm] x4
G) Allen Key x1
MIES LOW MEDIA CONSOLE
Assembly Instructions
TOOLS REQUIRED BUT NOT INCLUDED: N/A
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface such as carpet or cardboard.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
URBAN OUTFITTERS
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.

Page 2 of 2
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2019 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
FEDG
G
C
A
Note:
Adjust levelers to
accommodate
uneven floors.
A) With help, lay the media console (A) on its back and align the legs (B) as shown.
B) Insert Allen Bolt (E), Lock Washer (F), and Flat Washer (G) through the case into the legs as
shown and partially tighten with supplied Allen Key (H).
C) Insert Allen Bolt (C) through the bottom rail on the media cabinet as shown and partially
tighten.
D) Once all bolts are partially tightened, tighten all fully.
MIES LOW MEDIA CONSOLE
Assembly Instructions
STEP 1
URBAN OUTFITTERS