URBAN OUTFITTERS 68967801 User manual

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Anyunauthorizedreproduction, adaptation, distribution orother infringementwill be prosecuted.
Page 1 of 5
1) Top Shel f x1
(Wrapped in green tape)
2) Bottom Shelf x1
(Wrapped in green tape)
3) Leg x2
(Wrapped in green tape)
A) Allen Bolt
[8mm x 30mm] x8
B) Washer
[17mm] x8
C) Allen Key
[4mm] x1
LEANING STORAGE SHELF
Assembly Instructions
TOOLS REQUIRED BUT NOT INCUDED:
EX. ‘Phillips head screwdriver, Level, Hammer’ (do not include graphic)
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Anyunauthorizedreproduction, adaptation, distribution orother infringementwill be prosecuted.
Page 2 of 5
3
1
2
4
EXPLODED & LABELED
LEANING STORAGE SHELF
Assembly Instructions

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Anyunauthorizedreproduction, adaptation, distribution orother infringementwill be prosecuted.
Page 3 of 5
3
A
B
C A
B
1
1 3
A B
C A B
3
1
A
B
C A B
2 3
1
C
A B
A
2
C A B
B
30MM
30MM
17MM
LEANING STORAGE SHELF
Assembly Instructions
STEP 1
Lay the bottom shelf (2) upside down onto a clean smooth surface such as carpet or cardboard. Align the holes
in leg (3) to holes in shelf (1) as shown in below sketch. Insert Allen Bolts (A) with Washer (B) through the
bottom shelf (2) into legs then tighten with Allen key (C).
STEP 2
Repeat step 1 with top shelf (1).

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Anyunauthorizedreproduction, adaptation, distribution orother infringementwill be prosecuted.
Page 4 of 5
4
2
3
1
4
2
1
LEANING STORAGE SHELF
Assembly Instructions
STEP 2
Repeat steps 1 & 2 with additional leg.

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Anyunauthorizedreproduction, adaptation, distribution orother infringementwill be prosecuted.
Page 5 of 5
3.5”
69.5”
7”
5”
9”
10”
4”
ASSEMBLED
69”
LEANING STORAGE SHELF
Assembly Instructions